Intelix AUDISEY Athena Installation Manual

Audisey Athena

by Intelix

Intelix Audisey Athena Installation Manual

Important Safety Instructions

¾ Please completely read and verify you understand all instructions in this

manual before operating this equipment.

¾ Keep these instructions in a safe, accessible place for future reference.

¾ Heed all warnings.

¾ Follow all instructions.

¾ Do not use this apparatus near water.

¾ Clean only with a dry cloth.

¾ Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

¾ Use only accessories specified or recommended by Intelix.

¾ Explanation of graphical symbols:

o Lightning bolt/flash symbol: the lightning bolt/flash and

arrowhead within an equilateral triangle symbol is intended
to alert the user to the presence of uninsulated “dangerous
voltage” within the product enclosure which may be of
sufficient magnitude to constitute a risk of shock to a person
or persons.

o Exclamation point symbol: the exclamation point within an

equilateral triangle symbol is intended to alert the user to the
presence of important operating and maintenance (servicing)
instructions tin the literature accompanying the product.

¾ WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE
PLACED ON THIS APPARATUS.

¾ Use the mains plug to disconnect the apparatus from the mains.

¾ THE MAINS PLUG OF THE POWER SUPPLY CORD MUST REMAIN

READILY ACCESSIBLE.

¾ Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of your obsolete outlet. Caution! To reduce the risk of electrical
shock, grounding of the center pin of this plug must be maintained.

¾ Protect the power cord from being walked on or pinched particularly at the plugs,

convenience receptacles, and the point where they exit from the apparatus.

2 www.intelix.com

Intelix Audisey Athena Installation Manual

¾ Do not block the air ventilation openings. Only mount the equipment per Intelix’s

instructions.

¾ Use only with the cart, stand, tripod, bracket, table, or rack specified

by Intelix or sold with the equipment. When/if a cart is used, use
caution when moving the cart/equipment combination to avoid
injury from tip-over.

¾ Unplug this apparatus during lightning storms or when unused for long periods of

time.

¾ The unit’s main power switch labeling is “0” (OFF) and “I” (ON).

¾ Caution! Danger of explosion if battery is incorrectly installed. Replace with same

or equivalent type.

¾ Caution! Shock Hazard. Do not open the unit. Refer to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

¾ Warning! This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take adequate
measures.

¾ The unit’s speaker outputs are balanced floating outputs. Do not bridge together and

do not connect either phase to ground. Warning! The unit requires an 8 ohm

minimum load.

¾ Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

www.intelix.com

3

Intelix Audisey Athena Installation Manual

Table of Contents

Overview............................................................................................. 5

Quick Start ......................................................................................... 6

Mounting the Athena in the Rack...................................................................................6

Connecting Audio Cabling to the Athena......................................................................7

Connecting Control Cabling to the Athena................................................................ 11

Powering the Athena ..................................................................................................... 12

Powering Down the Athena......................................................................................... 12

Installing Athena Software................................................................13

Controlling the Athena......................................................................14

Control via a Dedicated Computer.............................................................................. 14

Control via RS232 .......................................................................................................... 14

Control via USB ............................................................................................................. 15

Control via Ethernet...................................................................................................... 15

Control via the Front Panel of the Athena................................................................. 15

Troubleshooting………………………………………………… ....... 18

Technical Specifications ................................................................... 19

Warranty ............................................................................................21

Copyright 2008 Intelix LLC.

Revision D

Design with Intelligence

Athena is Proudly Manufactured in the United States

4 www.intelix.com

Intelix Audisey Athena Installation Manual

Overview

The Intelix Audisey Athena combines the performance of a true matrix mixer
with the flexibility and digital signal processing of a digital amplifier—all in a
single, intuitive package.

Available in 8 inputs by 8 outputs or 16 inputs by 16 outputs, the Athena
features built-in audio preamplification, input signal processing, true matrix
mixing, output signal processing, and either eight or sixteen channels of
independent power amplification. The Athena provides users with up to 128
system presets, 16 input DSP presets per channel, and 16 output DSP presets per
channel via the front panel, USB, serial, or over the internet. Included real-time
event scheduling software provides sophisticated control options.

The Audisey Athena’s amplifier provides a pure digital audio path and is 93%
heat efficient. Complete short-circuit, thermal, and over-current automatic fault
recovery ensure piece of mind.

Mix, process, amplify, and control in a single chassis.
Design with Intelix and Design with Intelligence.

www.intelix.com

5

Intelix Audisey Athena Installation Manual

Quick Start

Mounting the Athena in the Rack

The Intelix Athena matrix mixer/amplifier mounts in a standard 19” width rack
and requires three rack spaces (3RU).

Ventilation

At least 2 inches of free air space is required on both sides of

¾

the Athena matrix for proper side ventilation.

Ensure there are no closeable doors on the rack that might seal

¾

the Athena matrix from a steady supply of cool air.

All Athena matrices are equipped with a front panel mounted

¾

exhaust fan. The front of the Athena must not be obstructed.

Avoid mounting the Athena matrix near a power amplifier or

¾

any other source of significant heat.

It is recommended that you leave an empty rack space above

¾

and below the Athena matrix for additional cooling.

6 www.intelix.com

Intelix Audisey Athena Installation Manual

Connecting Audio Cabling to the Athena

Please follow the steps below when connecting audio cabling to the Athena
matrix.

1) Determine if the output from the source device (CD player,
microphone, receiver, etc.) to the Athena matrix is balanced or
unbalanced. If unsure, refer to device’s manual.

¾ If the source device output is balanced, connect the device to

the Athena matrix using a modified cable with either an XLR
connector or a ¼” TRS (Tip Right Sleeve) connector.

¾ If the source device output is unbalanced, connect the device

to the Athena matrix using a modified cable with an RCA
connector.

2) Once the cable and connecter style have been determined, modify the
cable by cutting off the connector on one end.

3) Strip back the main insulation of the cable 1/8”. Take care not to
damage the conductors inside the cable.

4) Separate the insulated conductors from the exposed outer strands.

5) Twist together the exposed strands into a single conductor.

6) Strip back the insulation of the internally insulated conductor 1/8”.

7) Twist exposed strands of each conductor into one tightly twisted
conductor. This will be the positive conductor or the plus and
negative phase of a balanced source.

8) Connect the twisted conductors to the Athena matrix via removable
screw-terminal (phoenix-type) connectors.

9) Repeat the above steps for each input source required.

Recommended Audio Cable Wiring Methods

Connecting an Unbalanced Source to a Balanced Input

1) Cut a piece of audio cable about 1” long.

2) Pull out the conductors from the cable and twist together so that
there is now a single 1” long conductor.

3) Bend and insert each end of 1” long conductor into terminals
(GND) and (-) of the Phoenix-type plug receptacles of the
Athena unit.

4) Insert positive twisted conductor into terminal (+) of the
phoenix-type plug receptacle.

5) Insert ground twisted conductor into terminal (+) of the
phoenix-type plug receptacle.

www.intelix.com

7

Intelix Audisey Athena Installation Manual

Connecting an Unbalanced Source to a Balanced Input

1) Insert positive twisted conductor into terminal (+) of the
Phoenix-type plug receptacle.

2) Insert negative twisted conductor (shield) into terminal (-) of the
Phoenix-type plug receptacle.

Connecting a Balanced Source to a Balanced Input

1) Insert positive twisted conductor into terminal (+) of the
Phoenix-type plug receptacle.

2) Insert negative twisted conductor into terminal (-) of the
Phoenix-type plug receptacle.

3) Remove the shield (GND) lead.

Connecting a Balanced Source to a Balanced Input

1) Insert positive twisted conductor into terminal (+) of the
Phoenix-type plug receptacle.

2) Insert negative twisted conductor into terminal (-) of the
Phoenix-type plug receptacle.

3) Insert the outer shield conductor to terminal (GND).

8 www.intelix.com

Intelix Audisey Athena Installation Manual

Connecting Digital Audio

1) Using a 75 ohm coaxial digital audio cable (not included),
connect one end of the cable to the coaxial SPDIF (Sony
Phillips Digital Interface) connector on the source device.

2) Connect the other end of the coaxial cable to the SPDIF In 1 or
In 2 (In 1 uses audio input channels 1 and 2, and In 2 uses audio
input channels 5 and 6).

Note: The SPDIF inputs and outputs must be activated in the
Athena Designer Software.

Connecting 70 volt Speaker Outputs

For 70 volt systems, the Intelix 70V-AM transformer module must
be purchased separately. Each 70V-AM provides eight channels of
outputs. Two 70V-AM modules are required for an Athena-16
system.

www.intelix.com

9

Intelix Audisey Athena Installation Manual

y

g

Connecting Amplified Outputs

Each channel of the amplifier is a full-bridge output configuration
consisting of a positive (+) and negative (-) output. The outputs
must remain floating and must not be connected to ground.

Note: The speaker outputs are full
and over current conditions. A short to
condition will cause the affected output channel to shut
down for five seconds. The amplifier will resume operation
automatically after removal of the short or over current
condition. An over temperature condition will cause the
amplifier to limit the output power gracefully. If temperature
rises over a critical point, the amplifier will shut down.

protected against shorts

round or over current

10 www.intelix.com

Intelix Audisey Athena Installation Manual

Connecting Control Cabling to the Athena

The Audisey Athena provides multiple control options. When connecting
controllers and control cabling to the Athena, please follow the steps below.

RS232

The Athena features two RS232 serial ports on the rear panel of the matrix.
Using a straight-through type modem cable (DB9 to DB9), connect one end
of the cable to the computer communication port and the other end to either
of the RS232 ports on the Athena.

USB

The Athena features a USB port on the front panel of the matrix. Using a
USB cable, connect one end of the cable to the USB port on the computer
and the other end to the USB port on the Athena. Once connected, the
Athena USB driver must be installed on the controlling computer. This
driver is available on the Athena Installation CD-ROM provided with the
matrix.

Ethernet

The Athena features an ethernet connector on the rear panel of the matrix.
For direct PC connection, use an ethernet crossover cable. For network
connection, use a standard ethernet patch cable.

www.intelix.com

11

Intelix Audisey Athena Installation Manual

Powering the Athena

Please follow the steps below when connecting and powering on the Athena
matrix mixer/amplifier.

1) Connect the three-pronged power connector into the back of the
Athena matrix.

2) For 120V systems (United States), connect the supplied power cord
into a standard 120VAC 60HZ outlet. For systems other than 120V,
use a power cord with the generic IEC female receptacle and a local
style male plug (not included).

3) Power on the AC power switch located on the rear panel (0 = OFF; I
= ON). The blue power LEDs on the front of the Athena matrix will
illuminate and the front panel LCD will indicate the Athena system
configuration.

Note

The Audisey Athena matrix requires 30 seconds to fully boot up.

4) Using the LCD menu, confirm the output channel volume controls
are set at an acceptable level.

Warning!

If the volume is set at too high a level, damage to the speakers
could occur.

Powering Down the Athena

Please follow the steps below when powering off the Athena matrix
mixer/amplifier.

1) Power off the AC power switch located on the rear panel (0 = OFF; I
= ON). The blue power LEDs and the LCD display on the front of
the Athena matrix will turn off.

Note

When unplugging the power cord from the Athena, wait 30 seconds
after powering down the matrix to remove power. The master CPU
and fan may continue to run for up to 30 seconds after the matrix
has been turned off.

12 www.intelix.com

Intelix Audisey Athena Installation Manual

Installing Athena Software

In order to install the Athena Software, please follow the steps below.

1) Insert the Athena Software CD into the computer’s CD-ROM drive.

2) The CD should automatically start, and the Athena Autorun Wizard
window should initiate. If this does not occur, manually select your
computer’s CD-ROM drive and open the Autorun.exe.

3) Select the program(s) you wish to install and follow the Installation
Wizards.

Downloading the Athena Software Online

Athena Designer Software is available for download free from
www.intelix.com in the Technical Library or on the Athena web
page.

www.intelix.com

13

Intelix Audisey Athena Installation Manual

Controlling the Athena

The Audisey Athena provides multiple control options for added flexibility. The
Athena may be controlled simultaneously via the front panel, RS232, USB, or
ethernet. Begin by determining with method(s) will be used and then connect the
control cabling (see section Connecting Control Cabling to the Athena). Then
follow the steps below.

Control via a Dedicated Computer

A dedicated computer running Athena Designer Software, Stardraw Athena
Control Software, or another software control program may be used to control
the Audisey Athena matrix mixer/amplifier. Simply connect the computer to the
Athena via an ethernet crossover cable or serial cable.

PC Requirements

¾

¾
¾

PC computer (Pentium 133MHz and 32 MB RAM or
better) with a CD-ROM drive

Windows 98 or later
USB, Ethernet, or RS232 port connections

Control via RS232

The Athena features two RS232 serial ports on the rear panel of the matrix.
Using a straight-through type modem cable (DB9 to DB9), connect one end of
the cable to the computer communication port and the other end to either of the
RS232 ports on the Athena.

Dip Switches

There are eight dip switches on the rear panel of the Athena. Dip
switches 3, 4, 5, and 6 allow the RS232 baud rate to be fixed at
one of four values: 9600, 38400, 57600 or 115200. These baud
rates only apply to the RS232 port connections.

14 www.intelix.com

Intelix Audisey Athena Installation Manual

Control via USB

The Athena features a type “B” USB port on the front panel of the matrix. Using
a USB cable, connect one end of the cable to the USB port on the computer and
the other end to the USB port on the Athena. Once connected, the Athena USB
driver must be installed on the controlling computer. This driver is available on
the Athena Installation CD-ROM provided with the matrix.

Control via Ethernet

The Athena features an ethernet connector on the rear panel of the matrix. The
ethernet port is a 10 base T port, and runs the TCP/IP protocol. The Athena is
factory configured for DHCP host address assignment by default. A fixed IP
address may be assigned via Athena Designer Software.

Control via the Front Panel of the Athena

The Audisey Athena matrix mixer/amplifier features front panel control,
including control of volume and preset triggering.

Locking the Front Panel

1) Select the Mode button until Admin appears in the LCD
display.

2) Turn toggle knob until Lock Yes/No? appears in the LCD
display.

3) Select the Select button.

4) Turn the toggle knob to select Lock Yes or Lock No.

5) Select the Select button.

6) Once Yes is selected, Display Controls Locked appears in the
LCD display.

7) If No is selected, the main Admin menu appears in the LCD
display.

www.intelix.com

15

Intelix Audisey Athena Installation Manual

Un-locking the Front Panel

Adjusting LED Display Contrast

Selecting an Input DSP Preset

Setting the Inactivity Timeout Function

1) Hold down both the Mode button and the Select button.

2) While holding down the two buttons, turn toggle knob
clockwise.

1. Select the Mode button until Admin appears in the LCD
display.

2. Turn toggle knob until Contrast 1-100 appears in the LCD
display.

3. Select the Select button.

4. Turn the toggle knob to adjust the Contrast to the desired
level.

1) Select the Mode button until Input DSP Preset appears in the
LCD display.

2) Turn the toggle knob to select the desired input channel.

3) Select the Select button to access the Active and Cued Presets
menu for that channel.

4) Turn the toggle knob to scroll through and select the desired
DSP preset.

5) Select the Select button to invoke a preset.

1) Select the Mode button until Admin appears in the LCD
display.

2) Turn the toggle knob until Inactivity Timeout appears in the
LCD display.

3) Select the Select button.

4) Turn the toggle knob to select Inactivity Timeout On or
Inactivity Timeout Off.

16 www.intelix.com

Intelix Audisey Athena Installation Manual

Adjusting Output Volume for a Specific Channel

1) Select the Mode button until Output Volume appears in the
LCD display.

2) Select the Select button.

3) Turn the toggle knob to select a specific output channel.

4) Select the Select button.

5) Turn the toggle knob to adjust volume.

Setting the Blank Screen Function

1) Select the Mode button until Admin appears in the LCD
display.

2) Turn the toggle knob until Blank Screen Enable/Disable
appears in the LCD display.

3) Select the Select button.

4) Turn the toggle knob to select Blank Screen On or Blank
Screen Off.

Selecting System Presets

1) Select the Mode button until System Preset appears in

the LCD display.

2) Turn the toggle knob to scroll through and select the

desired system preset.

3) Select the Select button to invoke a preset.

www.intelix.com

17

Intelix Audisey Athena Installation Manual

Troubleshooting

Should the Athena not operate as expected, please consult the steps below.

No image or low lit image on the front panel LCD

1) Verify power to the unit (page 9).

Verify the unit is powered on (page 9).

2)

3) Increase the contrast in the Administration menu (page

14).

Verify the unit is not in Blank Screen mode (page 14).

4)

The front panel LCD is not responding

1) Verify the front panel of the unit is unlocked (page 13).

2) Power down and restart the unit (page 9).

18 www.intelix.com

Intelix Audisey Athena Installation Manual

Technical Specifications

General

Power Requirements.................................... internal 120-240 VAC; 60-50 Hz 7A

Rack Spaces......................................................................................... 3 rack units

Shipping Weight.............................................................................................24 lb

Intelix Part Number ........................................................ Athena-8 (eight channel)

Athena-16 (sixteen channel)

Frequency Response........................................... +/-0.5 dB from 20 Hz to 20 kHz

Dynamic Range ...................................................................... greater than 105 dB

Crosstalk....................................................................................better than -90 dB

THD+N........................... less than .05% @ 1 watt, 8 Ohm load, 20 Hz to 20 kHz

Inputs

Nominal Source Impedance................................... less than or equal to 600 ohms

Nominal Line Input Level ................................................................ +4 dBu RMS

Nominal Mic Input level.................................................................... -50 dB RMS

Maximum Input Level.................................................................... +26 dBu RMS

Maximum Input Voltage Gain ..................................................................... 60 dB

Equivalent Input Noise ............................... -129 dB @ 50 ohms 20 Hz to 20 kHz

(mic preamp stage)

Phantom Power....................................................................................... +15 VDC

Input Impedance ............................................ (electronically balanced) 20 kOhms

(unbalanced) 10 kOhms

Input Gain/Trim Range................................................................................. 60 dB

Monitor Outputs

Monitor Output Impedance.............................(electronically balanced) 440 ohms

(unbalanced) 220 ohms

Nominal Monitor Load Impedance................... greater than or equal to 600 ohms

Nominal Level.................................................................................. +4 dBu RMS

Maximum Level .....................................(electronically balanced) +26 dBu RMS

(unbalanced) +20 dBu RMS

Output Master Volume Range......................................................-100 dB to 0 dB

Output Channel Volume Range..................................................-88 dB to +12 dB

Monitor Dynamic Range ............................. greater than 112 dB (IEC-AA) range

Speaker Outputs

Athena-8 Speaker Outputs........................................... 100 watts per channel max

400 aggregate watts total per matrix into 8 Ohm load

(70 volt distribution systems require Audisey 70V-AM)

Athena-16 Speaker Outputs......................................... 100 watts per channel max

800 aggregate watts total per matrix onto 8 Ohms.

(70 volt distribution systems require Audisey 70V-AM)

Amplifier Efficiency......................................................................... 93% efficient

Amplifier Class..........................................................................................Class-D

www.intelix.com

19

Intelix Audisey Athena Installation Manual

Processing

Input Digital Signal Processing (DSP) ........... input preamplification gain control

EQ Center Frequency .................................... 255 steps between 20 Hz to 20 kHz

EQ Quality Factor............................................... greater than 0.5 and less than 10

EQ per Channel Filter Gain ..........................................................-60 dB to +6 dB

Output Digital Signal Processing (DSP)............... high and low shelf tone control

Tone Corner Frequency Adjustment............................................ 20 Hz to 20 kHz

Tone Gain ........................................................................................-10 to 9.55 dB

Speaker Align Time Delay ........................................................... 0 ms to 3.98 ms

Compressor Threshold.................................................................... 0 dB to -90 dB

Compressor Attack Time............................................................... 1 ms to 100 ms

Compressor Release Time ............................................................. 1 ms to 100 ms

Compressor Ratio .......................................................................... 1 ms to 100 ms

Matrix Mixing .................................ramping/slewing and linear/log control taper

Matrix Mixer Control ........................................... mix control at every crosspoint

Matrix Mixer Control Range ........................................................ 0 dB to -100 dB

Output Channel Control Range ..................................................+12 dB to -88 dB

Master Output Control Range....................................................... -100 dB to 0 dB

3-band parametric EQ

5-band parametric EQ

time delay

compressor/limiter

channel output volume

20 www.intelix.com

Intelix Audisey Athena Installation Manual

Warranty

All Intelix products are guaranteed against malfunction due to defects in
materials or workmanship for two years after date of purchase. If a
malfunction does occur during the specified period, the defective product
will be repaired or replaced at Intelix’s option without charge.
Furthermore, the “Fresh Start” program ensures that a product which has
been repaired or replaced is itself guaranteed for an additional two years.

This warranty does not cover: 1) Malfunction resulting from use of the
product other than as specified in the user manual; 2) Installation specific
wiring; 3) Malfunction resulting from abuse or misuse of the product; 4)
Exterior chassis appearance; 5) Malfunction occurring after repairs have
been made by anyone other than Intelix or any of its authorized service
representatives; 6) Acts of nature; 7) Optional embedded software
upgrades or updates.

All repair and service of Intelix products should only be provided by
qualified service personnel. Please contact Intelix for a list of authorized
service agents. Other attempts at service or repair will void the warranty.
Warranty service is only offered after a return authorization number has
been generated by an authorized Intelix factory representative.

Intelix Applications and Engineering support must be contacted prior to
any return of goods. To return a unit for service or repair, please call
Intelix directly for a return authorization number. Intelix will match
shipping charges for units still under warranty. If a unit which is out of
warranty needs repair, the dealer must pay for shipping, replacement
parts, and a fixed $100/hr labor fee. Normal Intelix credit terms apply to
billable repairs. If a unit is returned and found to work according to
factory specifications, a standard $100 service fee is billed regardless of
warranty status. All repairs are made in a reasonably quoted amount of
time; a rush shipment fee may apply to repairs needing a quicker than
usual turn-around time.

Note: Warranty Terms and Conditions subject to change and do not apply
outside the United States.

www.intelix.com

21

Intelix Audisey Athena Installation Manual

Thank you for your purchase.

We appreciate your business. Please contact us with your questions
and comments.

Intelix
2222 Pleasant View Road Suite 1
Middleton, WI 53562

Phone: [phone]
Toll-Free: 866-4-MATMIX
Fax: [phone]

www.intelix.com
[e-mail]

Athena is Proudly Manufactured in the United States

Copyright 2008 Intelix LLC.

Design with Intelligence

22 www.intelix.com

Intelix Audisey Athena Installation Manual

www.intelix.com

23