INTELCO INTD0909 Quick Start Manual

GSM Gateway INTD0909

voice / data

Quick-Start Manual

 Page 2 General Description - Specification

 Page 3 Wiring-Connection

 Page 4 Quick-Start Setup

GSM Gateway

voice / data

 Page 5 LEDs Indication

 Page 6 SMS programming codes

 Page 7 Extra Information - Technical support

Please read carefully the instructions in order to

get all the benefits of this device.

INTD0909

www.pelekis.tech

Rev. 1.01 March 2016

General Description:

The GSM gateway INTD0909 is an electronic device which can be used as a

stand alone voice & data communication gateway for almost any remote use. It is
specially
designed for elevator installations and combined with INTD0900, it unlocks many
features for reliable, robust and secure emergency GSM/Phone line calls.

The GSM gateway INTD0909 operates with 230V AC mains input or from a
backup battery (SLA type) 6,3V. If mains power fails, it switches to backup battery
operation and it can fully operate for up to 6 hour. The device does real time
battery charging/conditioning/maintaining and RF antenna signal strength
monitoring.

Combined with our external I/O expansion card, the INTD0909 can be trans­formed as an Input/output wireless remote monitoring and controlling device!

Caution : The installation and settings of the device, must be done by a qualified
person.

Specifications:

Power supply
On board battery type
Battery charger type
Power consumption

Network bands

Phone Line connection

230V AC 50Hz
Sealed Lead Acid GEL type 6V/1.3Ah
Trickle charging with MCU monitoring

3.5W continuous, all features on, all led on

GSM 850/900/1800/1900MHz

Standard RJ-45 jack

Ext. Line connection
SIM card type
On board connectivity

Standard RJ-45 jack
Standard, 3V

 2 optically isolated inputs
 2 relay outputs
 Optional add on card serially controlled ,for ex-

tending up to 8 inputs / 8 Outputs

Operation temperature
Operation humidity
Dimensions (External)
Weight (Total/w Battery)

INTELCO ELECTRONICS 2 ISO9001/2015 Rev. 1.01 March 2016

0-60°C
10-80% (non condensing)
60 x 210 x 145 mm (H x W x D)
1Kg

Wiring-Connection:

Connect the antenna at the terminal to the side of the box. Make sure for good
locking

Connect at the terminal PHONE of the device the telephone which will be used
(simple telephone or emergency telephone).

Install the SIM Card to SIM holder. Make sure that you have deactivated the

PIN number first.

Connect the 2 cables (Black and Red) to the right poles of the battery.
Connect the power cable to the terminal and plug it to the 230V AC.
Make a short circuit at the jumper “RESET” beside of the terminal BAT.

Fuse

Power

Outputs

Inputs

N

NC

L

R1
R1
C1

R2
C2

R1
C1

R2
C2

AC

Battery (6,3V)

RESET

INTELPHONE

External

INTELCO ELECTRONICS 3 ISO9001/2015 Rev. 1.01 March 2016

Line
Battery

Network
signal
strength

Net Status

LED Indication

SIM Card

Quick-Start Setup:

STEP 1

In order to startup the GSM Gateway device, please power up the device and then
short RESET pins by placing the RESET jumper. At startup of the device one short
buzz sound.

STEP 2

Device makes a quick check on AC power supply. If there is no AC power, device
will start up, powered from Battery if connected and it is good charged. While de­vice performs the action above all onboard leds are keep blinking every 500 ms .

STEP 3

After 4-5 sec device will start seeking for network to connect according to provider
of the applied SIM card and while this action S1,S2 and S3 leds are blinking and
Network led is blinking every 500 ms indicating that no network found till now. If
Network can not be found in a specific period of time, device timeout the process.

If Network did not found, device will work with “NO SIM Card detect” and can only
make outgoings call to (112) . If Network is approached device will work with “SIM
Card detect” and fully functional.

STEP 4

When S1,S2 and S3 leds stop blinking and Network led blink every 3 seconds then
onboard buzzer will buzz 2 times with short pause between.

Double buzzing sound let the user know that the startup process is just finished and
device is READY FOR USE, with every feature available to the user according the
status of network connection.

Functions with “SIM Card detected” :

 Voice Ready
 SMS Ready
 Data Ready (Not Available)
 Battery check

Functions with “SIM Card not detected” :

 Limited Voice Ready ( International Emergency Number (112))
 Battery check

INTELCO ELECTRONICS 4 ISO9001/2015 Rev. 1.01 March 2016

LEDs Indication

AC Led

LED status Description

ON

OFF

LED status Description

ON

OFF

Blink* (2 on / 4 off)

Blink* (0,5 on / 0,5 off)

AC power presents

AC power does not presents

LINE Led

Hook off
Hook on

Ringing

Connection established

NET Led

LED status Description

Blink* (0,5 on / 0,5 off)

Blink* (0,5 on / 3 off)

BAT Leds

LED status Description

ON

Blink* (3 on / 1 off) Battery over 70%.

Blink* (1 on / 3 off)

Network disconnected

Network connected

Battery is full charged

Battery over 50%

OFF

Signal Leds

LED status

S1 S2 S3

0 0 0

1 0 0

1 1 0

1 1 1 Signal < - 51dBm (Excellent)

Signal not Detectable or < -115dBm

Signal < - 91dBm (Weak)

Signal < - 71dBm (Good)

Description

Battery not connected

*Blink is in seconds.

INTELCO ELECTRONICS 5 ISO9001/2015 Rev. 1.01 March 2016

SMS Programming Table

Command Description Edit - Delete Ask

USER AUTHORIZED

#0000#1#...n...,_,...n2..,...n3…*

1

2

Calling number (4)

Example : n =00302102323345

#0000#2#6974587393*

Low battery call number

Delete : #0000#2#_*

#0000#1#?

#0000#2#?

3

4

5

6

7

8

20

21

22

User password

Buzzer function

Missed call function

Ask monitor

Outputs-Relays

R1
R2

R1,R2

Inputs-Optocouplers

ADMIN AUTHORIZED

Admin password

Auto-run number

Voice function

#0000#3#1E5D*

#0000#4#0*(OFF)

#0000#4#1* (ON)

#0000#5#0*(OFF)

#0000#5#1* (ON)

-

#0000#7#R1=1✶ ,R1=0✶
#0000#7#R2=1✶ ,R2=0✶

#0000#7#R1=0,R2=0✶
#0000#7#R1=1,R2=1✶

#0000#8#0*(AUTO OFF)

#0000#8#1*(AUTO ON)

#1111#20#1E5D*

#1111#21#6974587393*

Delete : #1111#21#_*

#1111#22#0* (OFF)

#1111#22#1* (ON)

-

#0000#4#?

#0000#5#?

#0000#6#?

#0000#7#?

#0000#8#?

-

#1111#21#?

-

23

24

Ask IMEI

#1111#24#0* (OFF)

SIM Card notifications

#1111#24#1* (ON)

-

#1111#23#?

-

Note:

‘ _ ’ : Variable reset to 0, delete.
‘ * ’ : Save or Act on variable.
‘ ? ’ : Ask the content of variable.
‘ # ’ : Change parameter field.
‘ , ’ : Change scope of variable if more than one Ex.(#0000#7#R1=1,r8:0,r7=0,r1=0* )

INTELCO ELECTRONICS 6 ISO9001/2015 Rev. 1.01 March 2016

Extra Information

For any extra information about installation or the operation mode of the device,
please refer to the GSM Reference Manual which is uploaded at our website.

Technical Support

For technical support of this product, please refer to the local distributor
or contact Intelco Electronics.

Intelco Electronics Contact Info :

Tel. :[phone]
Fax :[phone]
E-mail : [e-mail]
Website : www.intelco.gr

INTELCO ELECTRONICS 7 ISO9001/2015 Rev. 1.01 March 2016

INTELCO ELECTRONICS 8 ISO9001/2015 Rev. 1.01 March 2016