Intel SSDSC2BP240G401, SSDSC2BP240G410, SSDSC2BP240G4R5 User Manual
Intel® Solid-State Drive 730 Series
Capacities: 240GB, 480GB
Components:
Intel
®
20nm NAND Flash Memory
Multi-Level Cell (MLC)
Form Factors: 2.5 inch
Thickness: 7mm
Weight: Up to 78 grams
SATA 6Gb/s Bandwidth Performance
1
(IOMeter*
Queue Depth 32, 128KB3 IO)
Sustained Seq Read: Up to 550MB/s
2
Sustained Seq Write: Up to 470MB/s
2
SATA 6Gb/s Read and Write IOPS
1
(IOMeter Queue Depth 32)
Random 4KB
4
Reads: Up to 89,000 IOPS
Random 4KB
4
Writes: Up to 74,000 IOPS
Latency (average sequential)
Read: 50 µs (TYP)
Write: 60 µs (TYP)
AES 256-bit Encryption
Power Management
2.5 inch: 5V or 12V SATA Supply Rail
4
Power (5V / 12V)
5
Active: 5.0W / 5.5W
Idle: 1.3W / 1.5W
Temperature
Operating: 0°
C to 70° C
Non-Operating: -55°
C to 95° C
Compatibility
Intel
®
SSD Toolbox with Intel® SSD Optimizer
Intel
®
Data Migration Software
Intel
®
Rapid Storage Technology
SATA Revision 3.0
ACS-2 (ATA/ATAPI Command Set 2)
SSD Enhanced SMART ATA feature set
Reliability
Uncorrectable Bit Error Rate (UBER):
< 1 sector/ 1017 bits reads
Mean Time Between Failure (MTBF):
2 Million Hours
Shock (operating and non-operating):
1,000 G/0.5 msec
Endurance
Up to 70GB of writes a day
6
Vibration
Operating: 2.17 GRMS (5-700 Hz)
Non-operating: 3.13 GRMS (5-800 Hz)
Certifications and Declarations:
UL*, CE*, C-Tick*, BSMI*, KCC*, Microsoft*
WHCK, VCCI*, SATA-IO*
Product Ecological Compliance
RoHS*
Intel® Solid-State Drive 730 Series
Product Specification
Note:
1. Performance values vary by capacity, applies both to compressible and incompressible data.
2. MB/s = 1,000,000 bytes/second
3. 4KB = 4,096 bytes; 128KB = 131,072 bytes
4. Defaults to 12V, if both 12V and 5V are present
5. See electrical characteristics section under performance for workload specifics. Based on 480GB SSD.
6. Based on JESD218 standard
Order Number: 330177-003US
Intel® Solid-State Drive 730 Series
Ordering Information
Contact your local Intel sales representative for ordering information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL
OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND
CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death.
SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL
AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST
ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF
PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION , WHETHER OR NOT
INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rel y on the absence or
characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change
without notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling
1-800-548-4725, or go to: http://www.intel.com/design/literature.html
Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well
as purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements.
The replacement of halogenated flame retardants and/or PVC may not be better for the environment.
Software and workloads used in performance tests may have been optimized for performance only on Intel microprocessors. Performance tests,
such as SYSmark and MobileMark, are measured using specific computer systems, components, software, operations and functions. Any change
to any of those factors may cause the results to vary. You should consult other information and performance tests to assist you in fully evaluating
your contemplated purchases, including the performance of that product when combined with other products.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2014 Intel Corporation. All rights reserved.
Product Specification December 2014
2 330177-003
Intel® Solid-State Drive 730 Series
Contents
Revision History ............................................................................................................................................................................ 5
Terms and Acronyms ................................................................................................................................................................................................... 5
1 Introduction ................................................................................................................................................................... 6
1.1 Reference Documents .......................................................................................................................................................................... 7
2 Product Specifications ................................................................................................................................................. 8
2.1 Capacity ....................................................................................................................................................................................................... 8
2.2 Performance.............................................................................................................................................................................................. 8
2.3 Electrical Characteristics ..................................................................................................................................................................... 9
2.4 Environmental Conditions ............................................................................................................................................................... 10
2.4.1 Temperature, Shock, Vibration ............................................................................................................................................ 10
2.4.2 Altitude ............................................................................................................................................................................................ 10
2.5 Product Regulatory Compliance ................................................................................................................................................... 11
2.6 Reliability ................................................................................................................................................................................................. 12
2.7 Hot Plug Support ................................................................................................................................................................................. 12
3 Mechanical Information ............................................................................................................................................. 13
4 Pin and Signal Descriptions ...................................................................................................................................... 14
4.1 Pin Locations.......................................................................................................................................................................................... 14
4.2 Signal Descriptions ............................................................................................................................................................................. 14
4.2.1 Connector Pin Signal Definitions ........................................................................................................................................ 14
4.2.2 Power Pin Signal Definitions ................................................................................................................................................. 15
5 Supported Command Sets ........................................................................................................................................ 16
5.1 ATA General Feature Command Set ........................................................................................................................................... 16
5.2 Power Management ............................................................................................................................................................................ 17
5.3 SMART Command Set ....................................................................................................................................................................... 17
5.3.1 SMART Attributes ....................................................................................................................................................................... 18
5.3.2 SMART Logs .................................................................................................................................................................................. 20
5.4 Device Statistics .................................................................................................................................................................................... 21
5.5 SMART Command Transport ......................................................................................................................................................... 21
5.6 Data Set Management Command Set ........................................................................................................................................ 21
5.7 Host Protected Area Command Set ............................................................................................................................................ 22
5.8 48-Bit Address Command Set ....................................................................................................................................................... 22
5.9 General Purpose Log Command Set .......................................................................................................................................... 22
5.10 Native Command Queuing .............................................................................................................................................................. 22
5.11 Software Settings Preservation ..................................................................................................................................................... 22
6 Certifications and Declarations ................................................................................................................................ 23
7 Appendix....................................................................................................................................................................... 24
December 2014 Product Specification
330177-003 3
Intel® Solid-State Drive 730 Series
Tables
Table 1: Standard References ........................................................................................................................................................................ 7
Table 2: User Addressable Sectors .............................................................................................................................................................. 8
Table 3: Performance ......................................................................................................................................................................................... 8
Table 4: Latency .................................................................................................................................................................................................... 8
Table 5: Operating Voltage and Power Consumption ........................................................................................................................ 9
Table 6: Temperature, Shock, Vibration ................................................................................................................................................. 10
Table 7: Product Regulatory Compliance Specifications ............................................................................................................... 11
Table 8: Reliability Specifications .............................................................................................................................................................. 12
Table 9: Serial ATA Connector Pin Signal Definitions ...................................................................................................................... 14
Table 10: Serial ATA Power Pin Definitions ............................................................................................................................................. 15
Table 11: SMART Attributes............................................................................................................................................................................ 18
Table 12: SMART Attribute Status Flags ................................................................................................................................................... 20
Table 13: Device Statistics Log ...................................................................................................................................................................... 21
Table 14: Device Certifications and Declarations ................................................................................................................................. 23
Table 15: Identify Device Returned Sector Data ................................................................................................................................... 24
Figures
Figure 3-1: Dimensions for Full Size 2.5 inch Drives .............................................................................................................................. 13
Figure 4-1: Layout of Signal and Power Segment Pins ......................................................................................................................... 14
Product Specification December 2014
4 330177-003
Revision
Number
Description
Revision Date
001
Initial release
February 2014
002
Page 1, note 3 updated
March 2014
003
Added AES 256-bit encryption feature, document number correction and
format updates
December 2014
Term
Description
ATA
Advanced Technology Attachment
DAS
Device Activity Signal
DMA
Direct Memory Access
EXT
Extended
FPDMA
First Party Direct Memory Access
GB
Gigabyte (1,000,000,000 bytes)
Note: The total usable capacity of the SSD may be less than the total physical capacity because a small
portion of the capacity is used for NAND flash management and maintenance purposes.
Gb
Gigabit (1,000,000,000 bits)
HDD
Hard Disk Drive
I/O
Input/Output
IOPS
Input/Output Operations Per Second
KB
Kilobyte (1,024 bytes)
LBA
Logical Block Address
MB
Megabyte (1,000,000 bytes)
MLC
Multi-level Cell
MTBF
Mean Time Between Failures
NCQ
Native Command Queuing
NOP
No Operation
PIO
Programmed Input/Output
RDT
Reliability Demonstration Test
RMS
Root Mean Squared
SATA
Serial Advanced Technology Attachment
SMART
Self-Monitoring, Analysis and Reporting Technology
SSD
Solid-State Drive
TYP
Typical
UBER
Uncorrectable Bit Error Rate
Intel® Solid-State Drive 730 Series
Revision History
Terms and Acronyms
December 2014 Product Specification
330177-003 5
Intel® Solid-State Drive 730 Series
1 Introduction
This document describes the specifications and capabilities of the Intel® Solid-State Drive 730 Series
(Intel SSD 730 Series).
The Intel SSD 730 Series is a standard 2.5-inch form factor solid-state drive delivering leading performance for
Serial Advanced Technology Attachment (SATA)-based desktop and workstation computers in 240GB and 480GB
capacities.
The Intel SSD 730 Series is a high performance client SSD utilizing high-endurance components engineered for PC
enthusiast and workstation systems with demanding storage workload requirements. Intel SSD 730 Series is Intel’s
first SSD engineered with factory overclocked SSD controller and NAND bus speeds. By increasing the controller
clock speed from 400MHz to 600MHz, increasing NAND bus speeds from 83MHz to 100MHz and optimizing
firmware for client platforms, Intel has developed its highest performance client SSD for uncompressible
workloads. This allows 550 MB/s sequential read and 450 MB/s sequential write performance.
Intel SSD 730 Series component and NAND management provide consistent performance for single drive and RAID
configurations across all data types. This same Intel design delivers higher endurance far exceeding the
requirements of client usages with up to 70GB writes per day.
The 730 Series also supports AES 256-bit encryption. AES 256-bit encryption is an industry standard in data
security, providing a hardware-based mechanism for encryption and decryption of user data. Utilizing a 256-bit
encryption key, AES encryption—when combined with an ATA drive password—helps protect user data.
These features, offered with Intel’s 5 year warranty makes the Intel SSD 730 Series a remarkably compelling PC
client storage solution for PC enthusiast and workstation platforms.
Product Specification December 2014
6 330177-003
Date or Rev. #
Title
Location
May 2005
SFF-8201, 2.5-inch drive form factor
http://www.sffcommittee.org/
May 2006
SFF-8223, 2.5-inch Drive w/Serial Attachment Connector
http://www.sffcommittee.org/
Sept 2008
IEC* 55022 Information Technology Equipment — Radio
disturbance Characteristics— Limits and methods of
measurement CISPR22:2008 (Modified)
http://www.iec.ch/
Dec 2008
VCCI
http://www.vcci.jp/vcci_e/
June 2009
RoHS
http://qdms.intel.com/
Click Search MDDS Database and search
for material description datasheet
June 2009
Serial ATA Revision 3.0
http://www.sata-io.org/
August 2009
ACS-2 Specification
http://www.t13.org/
August 2010
IEC 55024 Information Technology Equipment —
Immunity characteristics— Limits and methods of
measurement CISPR24:2010
http://www.iec.ch/
Intel® Solid-State Drive 730 Series
1.1 Reference Documents
Table 1: Standard References
December 2014 Product Specification
330177-003 7
Intel® SSD 730 Series
Unformatted Capacity (Total User Addressable Sectors in LBA mode)
240GB
468,862,128
480GB
937,703,088
Specification
Unit
Intel® SSD 730 Series
240GB
480GB
Random 4KB Read (up to)2
IOPS
86,000
89,000
Random 4KB Write (up to)2
IOPS
56,000
74,000
Sequential 128KB Read (SATA 6 Gb/s) 3
MB/s4
550
550
Sequential 128KB Write (SATA 6 Gb/s) 3
MB/s4
270
470
Specification
Intel® SSD 730 Series
240GB
480GB
Read1
50 µs (TYP)
Write1
60 µs (TYP)
Power On To Ready2
2 seconds
2 Product Specifications
2.1 Capacity
Table 2: User Addressable Sectors
2.2 Performance
Table 3: Performance1
Intel® Solid-State Drive 730 Series
Notes:
1. Performance measured using IOMeter* with Queue Depth 32. Measurements are performed on 8 GB of Logical
Block Address (LBA) range on a full SSD
2. 4KB = 4096 bytes
3. 128KB = 131,072 bytes
4. MB/s = 1,000,000 bytes/second
Table 4: Latency
Notes:
1. Based on sequential 4KB using IOMeter* with Queue Depth 1 workload with Write Cache enabled
2. Power On To Ready time assumes proper shutdown
Product Specification December 2014
8 330177-003
Electrical Characteristics
Values (5V / 12V)
240GB
480GB
Operating Voltage for 5V (±5%)
Min.
Max.
Rise Time (Max./Min.)
Fall Time (Max./Min.)
Noise Tolerance
Min. Off Time2
4.75V
5.25V
1 sec / 1 ms
1 ms
50 mV pp (100 KHz – 20 MHz)
500 ms
Operating Voltage for 12V (±10%)
Min.
Max.
Rise Time (Max./Min.)
Fall Time (Max./Min.)
Noise Tolerance
Min. Off Time2
10.8V
13.2V
1 sec / 1 ms
1 ms
100 mV pp (100 KHz – 20 MHz)
500 ms
Idle
1.2W / 1.5W
1.3W / 1.5W
Active (Thermal) Power3
3.4W / 3.8W
5.0W / 5.5W
Regulator Power4
3.8W / 4.2W
5.8W / 6.4W
Intel® Solid-State Drive 730 Series
2.3 Electrical Characteristics
1
Table 5: Operating Voltage and Power Consumption
Notes:
1. All electrical characterization values reflect SSDs with 5V / 12V supply.
1. Minimum time from power down of drive (Vcc < 100 mV) to when it can be powered up.
2. Power measured during 128KB sequential writes with Queue Depth 32 workload using 100 ms sample period. This
represents power that would be thermal load on system during heavy workloads.
3. Power measured during 128KB sequential writes with Queue Depth 32 workload using 500 µs sample period. This
represents the amount of power that system power supply needs to regulate for proper device operation.
December 2014 Product Specification
330177-003 9
Loading...