Intel® Responsive Retail Sensor (RRS)
H1000, H3000 and H4000 Sensors
User & Installation Guide
Revision 0.4
August 2018
Revision 0.4
You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products
described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter
disclosed herein.
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.
All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product specifications
and roadmaps.
The products described may contain design defects or errors known as errata which may cause the product to deviate from published specifications.
Current characterized errata are available on request.
Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by visiting:
http://www.intel.com/design/literature.htm
Intel technologies’ features and benefits depend on system configuration and may require enabled hardware, software or service activation. Learn
more at http://www.intel.com/ or from the OEM or retailer.
No computer system can be absolutely secure.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
August 2018 User & Installation Guide
Revision 0.4 Page: 5
Revision History
Date
Revision
Description
June 2018
0.0
Initial release.
July 2018
0.1
Updates from J. Belstner
July 2018
0.2
Regulatory updates (sections 2.1, 2.2, 2.3, 2.5)
July 2018
0.3
Updated various minor references, B. Wixom
August 2018
0.4
Added China RoHS Table, Section 2.5. B. Wixom
§
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide August 2018
Page: 6 Revision 0.4
US, FCC & NRTL
EU Commission CE
Argentina, ENACOM
Australia, ACMA
Brazil, ANATEL
Canada, IC
China, CCC & SRRC (if
applicable)
Colombia, CRC MinTIC ANTV
and ANE
Costa Rica, SUTEL
Hong Kong, OFTA & KCC
India, TRAI
Indonesia, BRTI
Japan, MIC JATE & VCCI
Korea, KCC & RRL
Malaysia, MCMC
Mexico, IFT
Russia, Minsvyaz
Saudi Arabia, CITC
Singapore, IMDA
Taiwan, NCC BSMI
Thailand, NBTC
Turkey, ICTA
United Arab Emirates, TRA
Uruguay, URSEC
Vietnam, YNTA
International CB Scheme (IEC
62368-1)
1.0 Regulatory, Certification and Environmental
Compliance
Certifications have been acquired to operate in the following countries:
1.1 Federal Communications Commission (FCC) Compliance
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
August 2018 User & Installation Guide
Revision 0.4 Page: 7
This device FCC ID: ZFL-H4000, ZFL-H3000 and ZFL-H1000 and contains FCC ID: XF6RS9113DB(for H4000), IC: 1000H-H4000, 1000H-H3000 and 1000H-H1000 and
contains IC ID: 8407A-RS9113DB (for H4000), complies with FCC Part 15 and ISED
license-exempt RSS standards. Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil, qui contient ID FCC: ZFL-H4000, ZFL-H3000 and ZFL-H1000 et contient
FCC ID: XF6-RS9113DB (pour H4000), IC: 1000H-H4000, 1000H-H3000 et 1000HH1000 et contient IC ID: 8407A-RS9113DB(pour H4000), est conforme aux exigences
FCC et ISED pour les appareils radio autorisés. L’opération est soumise aux deux
conditions suivantes: (1) cet appareil ne doit pas provoquer d’interférence, et (2) cet
appareil peut provoquer des interférences, y compris des interférences pouvant entraîner
un fonctionnement indésirable.
Caution: Changes to this product or modifications not expressly approved by
the party responsible for compliance could void your authority to operate the
equipment.
WARNING: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
1.2 Industry Canada (IC) Compliance
This device FCC ID: ZFL-H4000, ZFL-H3000 and ZFL-H1000 and contains FCC ID: XF6RS9113DB(for H4000), IC: 1000H-H4000, 1000H-H3000 and 1000H-H1000 and
contains IC ID: 8407A-RS9113DB(for H4000), complies with FCC Part 15 and ISED
license-exempt RSS standards. Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil, qui contient ID FCC: ZFL-H4000, ZFL-H3000 and ZFL-H1000 et contient
FCC ID: XF6-RS9113DB(pour H4000), IC: 1000H-H4000, 1000H-H3000 et 1000HH1000 et contient IC ID: 8407A-RS9113DB(pour H4000), est conforme aux exigences
FCC et ISED pour les appareils radio autorisés. L’opération est soumise aux deux
conditions suivantes: (1) cet appareil ne doit pas provoquer d’interférence, et (2) cet
appareil peut provoquer des interférences, y compris des interférences pouvant entraîner
un fonctionnement indésirable.
Caution: Changes to this product or modifications not expressly approved by
the party responsible for compliance could void your authority to operate the
equipment.
Innovation, Science and Economic Development Canada ICES-003 Compliance Label:
CAN ICES-3(A)/NMB-3(A)
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired option of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
comparomettre le fonctionnement.
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide August 2018
Page: 8 Revision 0.4
部件名称
(Parts)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
主机板
Motherboard
×
○ ○ ○ ○ ○
机壳Chassis
×
○ ○ ○ ○ ○
缆线Cables
×
○ ○ ○ ○ ○
风扇 Fan
○ ○ ○ ○ ○
○
散热器Heat sink
○ ○ ○ ○ ○
○
本表格依据 SJ/T 11364 的规定编制。
○:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572标准规定的限量要求以下。
○:Indicates that this hazardous substance contained in all homogeneous materials of such component is within the limits specified in GB/T 26572.
×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572标准规定的限量要求。
×: Indicates that the content of such hazardous substance in at least a homogeneous material of such component exceeds the limits specified in
The Environmental Protection Use Period (EPUP) for all enclosed products and their parts are per the symbol shown here, unless otherwise marked.
Certain field-replaceable parts may have a different EPUP (for example, battery modules) number. The Environment-Friendly Use Period is valid
only when the product is operated under the conditions defined in the product manual.
1.5 H1000 Specific Instruction & Warning
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 8.5 dBi. Antennas not included in this list or having a gain greater than
8.5 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms.
Ce dispositif a été désigné pour fonctionner avec les antennes énumérées ci-dessous, et
ayant un gain maximum de 8.5 dBi. Les antennes non incluses dans cette liste ou ayant
un gain plus grand que 8.5 dBi sont strictement interdites pour l'utilisation avec cet
appareil. L'antenne requise impédance est 50 ohms.
(A) The recommended antenna types for the H1000 unit are listed below (and section
10.3.6.2):
a. Ceiling/Wall Mounting: Laird RFID Panel Antenna, S8655P (ETSI) or
S9025P (FCC). This antenna has a circularly polarized pattern and provide
5.5 dBi gain.
b. Tabletop Point-of-Sale (POS): Times-7 RFID Near-Field Antenna, A1030.
This antenna has a circularly polarized pattern and provides -15.0 dBi gain.
(B) The H1000 has 4x external ports, connector type Reverse Polarity SMA (SMA-R).
The maximum allowable torque for these external connectors is 10 in-lbs, max.
(C) It is possible that these port connectors require an RF adapter depending upon the
actual antenna that is used and it’s mating connector type.
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide August 2018
Page: 10 Revision 0.4
2.0 Safety and Regulatory Information
2.1.1 Safety & Regulatory Warnings
USERS: This device is intended to be use/operated by Instructed Persons &
Skilled Persons only.
Do Not Open: This device is not intended to be open by the operator. There
are no user serviceable parts.
Installation and Maintenance: Do not connect/disconnect any cables to or perform
installation/maintenance on this device during an electrical storm.
This equipment is only to be connected to PoE networks without routing to outside plants.
This unit is supplied by an UL Listed I.T.E.
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
August 2018 User & Installation Guide
Revision 0.4 Page: 11
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide August 2018
Page: 12 Revision 0.4
Feature
Description &
Purpose
H1000
H3000
H4000
Reader
UHF EPC Gen 2 RFID
Reader module. This
module supports the core
functionality of RRS (i.e.
inventory management)
Antenna
7.67 dBi Slot Coupled
Microstrip Antenna
.
*
Red Detector
Detect human motion
Magnetometer
Reading the orientation of
the device as it is
mounted.
Omnivision OV5640 5MP
camera for video and still
image capture
Redpine Systems
RS9113 integrated WiFi/BLE
Humidity
Read the temperature
and humidity of the
environment where the
device is mounted.
3.1 Features
The H3000 and H4000 are designed to be ceiling or wall mounted facing into the retail
space and hidden from view. H1000 is designed to be mounted under a table or flush
mounted to a wall or cabinet and hidden from view. The following features are unique to
the three different models
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
August 2018 User & Installation Guide
Revision 0.4 Page: 13
*
The H1000 model is designed to support up to four reverse-SMA RF ports for
connecting up to four UHF RFID external antennas (not included) on the front panel.
3.2 Block Diagrams
3.2.1 Top Level
A block diagram of the PCBA common toallproductsis shown below.
Figure 2: Hx000 Functional Block Diagram
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide August 2018
Page: 14 Revision 0.4
3.2.2 RF Subsystem
The R2000 subsystem (aka “RF Circuitry”) is defined as the ARM M4 (aka
Microcontroller), R2000/RFID transceiver (aka “Indy Reader Chip”), power amplifier,
directional coupler, 4-port antenna switch and associated matching components. The
Sensors uses an internal dual linear antenna that only requires two of the four ports. The
H1000 brings out all four of the antenna ports to external R-SMA connectors allowing the
System Integrator to use antennas that are not collocated with the H1000reader. Below
is a block diagram of the R2000 Sub-System.
3.2.3 R2000 ASIC
For reference, a block diagram of the Impinj R2000 ASIC internal components is shown
below.
Figure 3: R2000 ASIC Block Diagram
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
August 2018 User & Installation Guide
Revision 0.4 Page: 15
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.