How it Works
Intel
Loading...
H310
Technical Manual
52 pgs5.2 Mb0

Intel H310, H370 Technical Manual

TECHNICAL MANUAL
Of
Intel H310/H370 Express Chipset
NO. G03-NF893-F
Revision: 1.0
Release date: January 4, 2019
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
i
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize pollution and ensure environment protection of mother earth, please recycle.
ii
ENVIRONMENTAL SAFETY INSTRUCTION ................................................................... iii
USER’S NOTICE ............................................................................................................. iv
MANUAL REVISION INFORMATION .............................................................................. iv
ITEM CHECKLIST ........................................................................................................... iv
CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD............................................................................. 1
1-2 SPECIFICATION ..................................................................................................... 2
1-3 LAYOUT DIAGRAM ................................................................................................ 3
CHAPTER 2 HARDWARE INSTALLATION
2-1 JUMPER SETTING ................................................................................................. 9
2-2 CONNECTORS, HEADERS AND WAFERS ........................................................... 13
2-2-1 CONNECTORS ......................................................................................... 13
2-2-2 HEADERS & WAFERS .............................................................................. 20
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERING SETUP ................................................................................................. 25
3-2 BIOS MENU SCREEN ............................................................................................ 26
3-3 FUNCTION KEYS ................................................................................................... 26
3-4 GETTING HELP ...................................................................................................... 27
3-5 MENU BARS .......................................................................................................... 27
3-6 MAIN MENU ........................................................................................................... 28
3-7 ADVANCED MENU ................................................................................................. 29
3-8 CHIPSET MENU ..................................................................................................... 40
3-9 SECURITY MENU ................................................................................................... 43
3-10 BOOT MENU .......................................................................................................... 46
3-11 SAVE & EXIT MENU ............................................................................................... 47
TABLE OF CONTENT
iii
Environmental Safety Instruction
l Avoid the dusty, humidity and temperature extremes. Do not place the product in
any area where it may become wet.
l 0 to 40 centigrade is the suitable temperature. (The temperature comes from the
request of the chassis and thermal solution)
l Generally speaking, dramatic changes in temperature may lead to contact
malfunction and crackles due to constant thermal expansion and contraction from the welding spots’ that connect components and PCB. Computer should go through an adaptive phase before it boots when it is moved from a cold environment to a warmer one to avoid condensation phenomenon. These water drops attached on PCB or the surface of the components can bring about phenomena as minor as computer instability resulted from corrosion and oxidation from components and PCB or as major as short circuit that can burn the components. Suggest starting the computer until the temperature goes up.
l The increasing temperature of the capacitor may decrease the life of computer.
Using the close case may decrease the life of other device because the higher temperature in the inner of the case.
l Attention to the heat sink when you over-clocking. The higher temperature may
decrease the life of the device and burned the capacitor.
iv
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
1.0 First Edition January 4, 2019
Item Checklist
R
Motherboard
R
DVD for motherboard utilities
R
User’s Manual
R
Cable
(s)
1
Chapter 1
Introduction of the Motherboard
1-1 Feature of Motherboard
l Intel® H310/H370 express chipset l LGA 1151 CPU socket supports Intel® Coffee Lake-S series processor (TDP ≤65
W).
l Support 2* DDR4 2400MHz SO-DIMM up to 32GB and dual channel function l Support 1 * Intel i219-V Gigabit Ethernet LAN chip l Support USB 3.1 data transport demand l Support 2 * SATAIII (6Gb/s) ports l Support 1* PCIE x1 slot, 1* M.2 E-key 2230 PCIe slot and 1* M.2 M-key
2242/2260/2280 slot
l Support 1 * HDMI + 1 * DP + 1* LVDS (option with eDP) l Support 1 * COM, optional 4/6 * USB 3.1 & 4 * USB 2.0 for rich IO expansion l Support Smart FAN function l Supports ACPI S3 Function l Compliance with ErP Standard l Support Watchdog Timer Technology
2
1-2 Specification
Spec
Description
Design
l Thin mini-ITX form factor; PCB size: 17.0x17.0cm
Chipset
l Intel H310/H370 Express Chipset
CPU Socket
l Intel® LGA 1151 Socket for Coffee Lake-S series processors
*Note: for detailed CPU support information please visit our website
Memory Slot
l 2*
DDR
4 SO-DIMM slot
l Support DDR4 2400/2666 MHz SO-DIMM up to 32GB l Support dual channel function
Expansion Slot
l 1* PCIE x1
slot (
PCI-
E
)
l 1* M.2 PCIE slot (
M2E
,2230 E-key PCIE interface)
Storage
l 2
* SATAIII 6G/s port
(SATA
1/2)
l 1* M.2 M-key slot, type-2242/2260/2280 with SATA interface (
M2M
,
*SATA/PCIE interface)
*Note: PCIE signal is supported by NF893-H370 series only.
LAN Chip
l Integrated with 1* Intel i219-V Gigabit PCI-E LAN chip l Support Fast Ethernet LAN function of providing 10/100/1000Mbps
Ethernet data transfer rate
Audio Chip
l Realtek ALC662-VD 4-channel Audio Codec integrated l Audio driver and utility included
BIOS l AMI Flash ROM
Multi I/O
Rear Panel I/O:
l 1*19V DC-in Power Jack l
4* USB 3.1 (Gen.1) port (Optional for NF893-H310 Series)
l
4* USB 3.1 (Gen.2) port (Optional for NF893-H370 Series)
l 1* HDMI port l 1* DP port l 1* RJ-45 LAN port l 1* Line-out port l 1* MIC port
Internal I/O Connectors & Headers:
l 1 *2-pin 19V internal power connector l 1* CPUFAN connector & 1* SYSFAN connector l 1* SATA Power-out connector l 1* MON_SW connector
3
l 1* Front panel header
l 1* PS/2 keyboard & mouse header l 1* Serial port header l 1* GPIO header l 2* 9-Pin USB 2.0 header for 4* USB 2.0 ports l 1* 19-Pin USB 3.1 (Gen.2) header for 2* USB 3.1 (Gen.2) ports
(Optional
for NF893-H370 Series)
l 1*Front panel audio header l 1* DMIC_CON digital microphone header l 1* Speaker header l 1* PN_LED header (for LAN activity LED/ Blue tooth activity LED/
WIFI
activity LED)
l 1* LVDS connector (Default) or 1* EDP connector (Optional by order) l 1*Inverter header
1-3 Layout Diagram
Rear IO Diagram
*Note: NF893-H310 series come with 4* USB 3.1 (Gen.1) ports which supports 5Gps data transfer
rate; NF893-H370 series come with 4* USB 3.1 (Gen.2) ports which supports 10Gps data transfer rate
MIC Port
Line-Out Port
RJ-45 LAN Port
Display Port
HDMI Port
*
USB 3.
1 Ports
19V DC
-
In
Power Jack
4
Motherboard Internal Diagram-Front
NF893-H310 Series:
LGA 1151
CPU Socket
H310 Chipset
DDR4
SODIMM Slots
(SODIMM1/2)
RJ-45
LAN Port
Line-Out
Port
MIC
Port
HDMI
Port Display
Port
USB 3.1
(Gen.1)Ports
19V DC
-
IN
Power Jack
Internal 19V DC
-
IN
Power Connector
SATAIII Ports
(SATA1/2)
SYSFAN
Connector
CPUFAN
Connector
Front Panel
Header
Inverter
USB 2.0 Port
Header
USB 2.0 Port
Header
GPIO Heade
r
M.2 M-Key Slot
(M2M)
PS2KBMS Header
M.2E-Key Slot
(
M2E)
Front Panel
Audio
Header
P
CIE X1 Slot
(PCI-E)
SPEAK_CON
Header
DMIC_CON
Header
PN_LED
Header
SATA Power
Connector
(SATAPWR)
*
LVDS
Connector
(Optional with
EDP)
MON_SW
Header
Serial Port
Header
5
NF893-H370 Series:
*Note: The product diagrams are for illustration purpose only and mostly come from Model
NF893-H370, unless otherwise noted.
LGA 1151
CPU Socket
H370 Chipset
DDR4
SODIMM Slots
(SODIMM1/2)
RJ-45
LAN Port
Line-Out
Port
MIC
Port
HDMI
Port Display
Port
USB 3.1
(Gen.2)Ports
19V DC
-
IN
Power Jack
Internal 19V DC
-
IN
Power Connector
SATAIII Ports
(SATA1/2)
SYSFAN
Connector
CPUFAN
Connector
Front Panel
Header
USB 2.0 Port
Header
USB 2.0 Port
Header
GPIO Header
Serial Port
Header
M.2 M-Key Slot
(M2M)
PS2KBMS Header
M.2 PCIE Slot
(
M2E)
Front Panel
Audio
Header
PCIE X1 Slot
(PCI-E)
MON_SW
Header
SPEAK_CON
Header
DMIC_CON
Header
PN_LED
Header
SATA Power
Connector
(SATAPWR)
* USB 3.1 (Gen.2)
Header
Inverter
*
LVDS
Connector
(Optional with
EDP)
6
Motherboard Internal Diagram-Back
*Note: The default board comes with LVDS connecoter.EDP connector is only optional by order.
Only one of them comes with a board.
*
EDP
Connector
(Optional
with LVDS)
7
Motherboard Jumper Position:
*Note: 1.JPTEST is for manufacture usage only;
2. The product diagram above is from Model NF893-H310.
AT_COPEN
JP1
JP2
*JPTEST
JBAT
8
Connectors
P/N Name
DCIN
19V DC-IN Power Jack
USB1/USB2
(For NF893-H310)
USB 3.1 (Gen.1) Port Connector X4
USB1/USB2
(For NF893-H370)
USB 3.1 (Gen.2) Port Connector X4
DP Display Port Connector HDMI HDMI Port Connector LAN RJ-45 LAN Connector FP_HP Audio Line-out Connector FP_MIC Audio MIC Connector ATX2P Internal 19V Power Connector SYSFAN System Fan Connector CPUFAN CPUFAN Connector SATA1/SATA2 SATAIII Connector X 2 SATAPWR SATA Power-out Connector SPEAK_CON 3W Amplifier Connector MON_SW Monitor Switch Connector LVDS LVDS Port Connector EDP(Optional) EDP Port Connector INVERTER Flat Panel Backlight Inverter
Headers & Wafer
P/N Name Description
JW_FP
Front Panel Header(PWR LED/ HD
LED/Power Button /Reset)
9-pin Block
PS2KBMS PS2 Keyboard & Mouse Header 6-pin Block COM Serial Port Header 9-pin Block GPIO GPIO Port Header 10-pin Block FP_USB3
(For NF893-H370)
USB 3.1 (Gen.2) Port Header 19-pin Block
FP_USB1/ FP_USB2 USB 2.0 Port Header 9-pin Block FP_AUDIO Front Panel Audio Header 9-pin Block
9
DMIC_CON Digital Microphone Header 4-pin Block PN_LED Connectivity LED Header
(LAN/Bluetooth/WIFI Activity LED)
6-pin Block
Jumper
P/N Name Description
JBAT Pin (1-2): Clear CMOS RAM Settings
Pin (3-4): Flash Descriptor Override Pin (5-6): PWROK Override
6-pin Block
AT_ COPEN
Pin (1-2): AT Mode Select
Pin (3-4): Case Open Display Select
4-pin Block
JP1 LCD Panel VCC Select 4-pin Block JP2 LCD Backlight Select 4-pin Block
Chapter 2
Hardware Installation
2-1 Jumper Setting
Pin 1&2 of JBAT (6-pin): Clear CMOS RAM Setting
1-2 Closed: Clear CMOS(One Touch).
1-2 Open: Normal(Default);
Pin 1&2 of JBAT→Clear CMOS
Pin1
2
Pin1
2
JBAT
10
Pin 3&4 of JBAT (6-pin): Flash Descriptor Override Select
Pin1
2
Pin1
2
Pin 3&4 of JBAT→
Flash Descriptor Override
3-4 Open: Normal(Default);
3
4
3-4 Closed: Disable Flash
Descriptor Security (override).
3
4
Pin 5&6 of JBAT (6-pin): PWROK Override Select
Pin1
2
Pin1
2
5-6 Open: Normal(Default);
3
4 3 4
Pin 5&6 of JBAT→PWROK Override
5-6 Closed: PWROK Override.
6
5 5 6
* Note: PWROK override is for manufacturing test only.
JBAT
JBAT
11
Pin 1&2 of AT_COPEN (4-pin):
AT Mode Select
Pin 1&2 of AT_COPEN
→
AT Mode Select
1-2 Open: ATX Mode
Selected(Default);
1-2 Closed: AT Mode Selected.
4
Pin1
Pin14
*ATX Mode Selected: Press power button to power on after power input ready; AT Mode Selected: Directly power on as power input ready.
Pin 3&4 of AT_COPEN (4-pin): Case Open Message Display Function Select
4
Pin1
Pin 3&4 of AT_COPEN
→
Case Open Detection
CASE
OPEN GND
Pin (3&4) short
: When Case open function pin short to GND, the Case open function was detected. When used, needs to enter BIOS and enable ‘Case Open Detect’ function. In this case if your case is removed, next time when you restart your computer, a message will be displayed on screen to inform you of this.
AT_COPEN
AT_COPEN
Loading...
+ 36 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use