Intel BOXDG43NB, DG43NB Product Manual
Intel® Desktop Board DG43NB
Product Guide
Order Number: E40789-001
Revision History
Revision Revision History Date
-001 First release of the Intel® Desktop Board DG43NB Product Guide June 2008
If an FCC declaration of conformity marking is present on the board, the following statement applies:
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124
1-800-628-8686
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the
user’s authority to operate the equipment.
Tested to comply with FCC standards for home or office use.
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par
le ministére des Communications du Canada.
Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended
for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and
product descriptions at any time, without notice.
Intel Desktop Board DG43NB may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing
your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel
literature, may be obtained from Intel Corporation by going to the World Wide Web site at:
http://intel.com/ or by calling 1-800-548-4725.
Intel, the Intel logo, and Intel Viiv are trademarks of Intel Corporation in the U.S. and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2008, Intel Corporation. All rights reserved.
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
Preface
This Product Guide gives information about board layout, component installation, BIOS
update, and regulatory requirements for Intel
®
Desktop Board DG43NB.
Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for
general audiences.
Use Only for Intended Applications
All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.)
for use in personal computers (PC) for installation in homes, offices, schools, computer
rooms, and similar locations. The suitability of this product for other PC or embedded
non-PC applications or other environments, such as medical, industrial, alarm systems,
test equipment, etc. may not be supported without further evaluation by Intel.
Document Organization
The chapters in this Product Guide are arranged as follows:
1 Desktop Board Features: a summary of product features
2 Installing and Replacing Desktop Board Components: instructions on how to install
the Desktop Board and other hardware components
3 Updating the BIOS: instructions on how to update the BIOS
A Error Messages and Indicators: information about BIOS error messages and beep
codes
B Regulatory Compliance: safety standards, regulations, and product certifications
Conventions
The following conventions are used in this manual:
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
iii
Intel Desktop Board DG43NB Product Guide
Terminology
The table below gives descriptions of some common terms used in the product guide.
Term Description
GB Gigabyte (1,073,741,824 bytes)
GHz Gigahertz (one billion hertz)
KB Kilobyte (1024 bytes)
MB Megabyte (1,048,576 bytes)
Mbit Megabit (1,048,576 bits)
MHz Megahertz (one million hertz)
iv
Contents
1 Desktop Board Features
Desktop Board Components.................................................................................11
Processor..........................................................................................................13
Main Memory.....................................................................................................13
®
Intel
G43 Express Chipset .................................................................................14
Intel G43 Graphics Subsystem......................................................................14
PCI Express x16 Graphics ............................................................................15
Audio Subsystem ...............................................................................................16
Legacy Input/Output (I/O) Controller....................................................................16
LAN Subsystem .................................................................................................17
LAN Subsystem Software.............................................................................17
LAN Status Indicators..................................................................................17
Hi-Speed USB 2.0 Support ..................................................................................18
Enhanced IDE Interface ......................................................................................18
Serial ATA.........................................................................................................18
Expandability.....................................................................................................18
BIOS................................................................................................................19
Serial ATA Auto Configuration.......................................................................19
PCI and PCI Express* Auto Configuration.......................................................19
Security Passwords.....................................................................................19
Hardware Management Features ..........................................................................20
Fan Speed, Thermal, and Voltage Monitoring and Control .................................20
Chassis Intrusion........................................................................................20
Power Management Features ...............................................................................21
ACPI.........................................................................................................21
Hardware Support ......................................................................................21
Power Connectors ...............................................................................21
Fan Headers .......................................................................................22
LAN Wake Capabilities..........................................................................22
Instantly Available PC Technology..........................................................22
+5 V Standby Power Indicator...............................................................23
Wake from USB ..................................................................................23
Wake from PS/2 Keyboard/Mouse..........................................................23
PME# Signal Wake-up Support..............................................................23
WAKE# Signal Wake-up Support ...........................................................24
ENERGY STAR* Qualified .............................................................................24
Speaker............................................................................................................24
Battery.............................................................................................................24
Real-Time Clock.................................................................................................24
2 Installing and Replacing Desktop Board Components
Before You Begin ...............................................................................................25
Installation Precautions.......................................................................................26
Prevent Power Supply Overload ....................................................................26
Observe Safety and Regulatory Requirements.................................................26
Installing the I/O Shield ......................................................................................27
Installing and Removing the Desktop Board ...........................................................28
v
Intel Desktop Board DG43NB Product Guide
Installing and Removing a Processor.....................................................................29
Installing a Processor ..................................................................................29
Installing a Processor Fan Heat Sink..............................................................32
Connecting the Processor Fan Heat Sink Cable................................................33
Removing the Processor ..............................................................................33
Installing and Removing Memory..........................................................................34
Installing DIMMs ........................................................................................35
Removing DIMMs........................................................................................37
Installing and Removing a PCI Express x16 Card ....................................................37
Installing a PCI Express x16 Card .................................................................38
Removing the PCI Express x16 Card..............................................................39
Connecting the IDE Cable....................................................................................40
Connecting Serial ATA (SATA) Cables....................................................................42
Connecting to Internal Headers and Connectors .....................................................43
HD Audio Link Header .................................................................................44
S/PDIF Connector.......................................................................................44
Chassis Intrusion Header.............................................................................44
Front Panel HD Audio Header .......................................................................45
USB 2.0 Headers ........................................................................................45
Serial Port Header ......................................................................................46
Front Panel Header .....................................................................................46
Alternate Front Panel Power LED Header........................................................46
IEEE 1394a Header.....................................................................................47
Connecting to the Audio System...........................................................................47
Connecting Chassis Fan and Power Supply Cables...................................................48
Chassis Fan Cables .....................................................................................48
Power Supply Cables...................................................................................49
Setting the BIOS Configuration Jumper .................................................................50
Clearing Passwords ............................................................................................51
3 Updating the BIOS
Updating the BIOS with the Intel
Updating the BIOS with the ISO Image BIOS Update File or the Iflash Memory
Update Utility...............................................................................................60
Obtaining the BIOS Update File ....................................................................60
Updating the BIOS with the ISO Image BIOS Update File .................................60
Updating the BIOS with the Iflash Memory Update Utility .................................61
Recovering the BIOS...................................................................................62
®
Express BIOS Update Utility.................................59
A Error Messages and Indicators
BIOS Beep Codes...............................................................................................63
BIOS Error Messages..........................................................................................63
B Regulatory Compliance
Safety Standards ...............................................................................................65
Place Battery Marking .................................................................................65
European Union Declaration of Conformity Statement..............................................66
Product Ecology Statements ................................................................................67
Recycling Considerations .............................................................................67
Lead-free 2LI/Pb-free 2LI Board ...................................................................70
vi
Contents
Restriction of Hazardous Substances (RoHS) ..................................................71
EU RoHS ............................................................................................71
China RoHS ........................................................................................72
EMC Regulations ................................................................................................74
Ensure Electromagnetic Compatibility (EMC) Compliance..................................75
Product Certifications..........................................................................................76
Board-Level Certification Markings ................................................................76
Chassis and Component Certifications............................................................77
Figures
1. Intel Desktop Board DG43NB Components .......................................................11
2. LAN Status LEDs ..........................................................................................17
3. Location of the +5 V Standby Power Indicator ..................................................23
4. Installing the I/O Shield ................................................................................27
5. Intel Desktop Board DG43NB Mounting Screw Hole Locations..............................28
6. Lift the Socket Lever.....................................................................................29
7. Lift the Load Plate.........................................................................................30
8. Remove the Protective Socket Cover ...............................................................30
9. Remove the Processor from the Protective Processor Cover ................................31
10. Install the Processor .....................................................................................31
11. Close the Load Plate .....................................................................................32
12. Connecting the Processor Fan Heat Sink Cable..................................................33
13. Dual Channel Memory Configuration Example ...................................................34
14. Use DDR2 DIMMs .........................................................................................35
15. Installing a DIMM .........................................................................................36
16. Installing a PCI Express x16 Card ...................................................................38
17. Removing a PCI Express x16 Card ..................................................................39
18. Connecting the IDE Cable ..............................................................................41
19. Connecting a Serial ATA Cable........................................................................42
20. Internal Headers and Connectors....................................................................43
21. Back Panel Audio Connectors .........................................................................47
22. Location of the Chassis Fan Headers................................................................48
23. Connecting Power Supply Cables ....................................................................49
24. Location of the BIOS Configuration Jumper Block ..............................................50
25. Removing the Battery ...................................................................................57
26. Intel Desktop Board DG43NB China RoHS Material Self Declaration Table .............73
Tables
1. Feature Summary.......................................................................................... 9
2. Intel Desktop Board DG43NB Components .......................................................12
3. Audio Jack Retasking Support.........................................................................16
4. LAN Connector LEDs .....................................................................................18
5. HD Audio Link Header Signal Names ...............................................................44
6. S/PDIF Connector Signal Names .....................................................................44
7. Chassis Intrusion Header Signal Names ...........................................................44
8. Front Panel Audio Header Signal Names...........................................................45
9. USB 2.0 Header Signal Names........................................................................45
10. Serial Port Header Signal Names.....................................................................46
11. Front Panel Header Signal Names ...................................................................46
12. Alternate Front Panel Power LED Header Signal Names ......................................46
13. IEEE 1394a Header Signal Names ...................................................................47
vii
Intel Desktop Board DG43NB Product Guide
14. Jumper Settings for the BIOS Setup Program Modes..........................................51
15. Beep Codes .................................................................................................63
16. BIOS Error Messages ....................................................................................63
17. Safety Standards..........................................................................................65
18. Lead-Free Second Level Interconnect Marks .....................................................71
19. China RoHS Environmentally Friendly Use Period Mark.......................................72
20. EMC Regulations...........................................................................................74
21. Product Certification Markings ........................................................................76
viii
1 Desktop Board Features
This chapter briefly describes the features of Intel® Desktop Board DG43NB. Table 1
summarizes the major features of the Desktop Board.
Table 1. Feature Summary
Form Factor
Processor Support for an Intel® processor in the LGA775 package
Main Memory
Chipset Intel® G43 Express Chipset consisting of:
Graphics
Audio Onboard subsystem, featuring:
Expansion
Capabilities
Legacy I/O Support Legacy I/O Controller that provides:
Peripheral
Interfaces
ATX (294.64 millimeters [11.60 inches] x 243.84 millimeters
[9.60 inches])
• Two 240-pin, DDR2 1.8 V SDRAM Dual Inline Memory Module
(DIMM) sockets
• 800/667 MHz single or dual channel DDR2 SDRAM interface
• Support for up to 4 GB of system memory
• Intel G43 Express Chipset Graphics and Memory Controller Hub
(GMCH)
• Intel
• Intel G43 Express Chipset with
• One PCI Express* 2.0 x16 connector supporting PCI Express
• Support for dual independent displays via the DVI-D and VGA ports
• Independent 6-channel (5.1) audio streams
• 2-channel stereo audio streams via an onboard header
• Intel
• RealTek* ALC888VC audio codec
• Onboard 3-pin S/PDIF output connector
• One PCI Express 2.0 x16 connector
• Three PCI Express 1.1 x1 connectors
• Three PCI* connectors
• PS/2* keyboard and mouse ports
• One serial port via an onboard header
• Up to 12 USB 2.0 ports:
• Up to two IEEE 1394a ports:
• Six Serial ATA (SATA) channels (3.0 Gb/s) via ICH10
• One IDE interface with ATA-66/100 support (two devices)
®
82801JB I/O Controller Hub (ICH10)
X4500 (Intel
graphics add-in cards
®
― Six ports routed to the back panel
― Six ports routed to three USB headers
― One port routed to the back panel
― One port routed to an onboard IEEE 1394a header
®
GMA X4500)
High Definition Audio (Intel® HD Audio) interface
Intel® Graphics Media Accelerator
continued
9
Intel Desktop Board DG43NB Product Guide
Table 1. Feature Summary (continued)
BIOS
• Intel
• 32 Mbit symmetrical flash memory device
• Support for SMBIOS
• Intel
• Intel
Power Management
• Support for Advanced Configuration and Power Interface (ACPI)
• Suspend to RAM (STR)
• Wake on USB, PCI, PCI Express, PS/2, LAN, and front panel
• ENERGY STAR* capable
Hardware
Management
Hardware monitor with:
• Four fan sensing inputs used to monitor fan activity
• Intel
• Voltage sensing to detect out of range values
LAN Support Intel® 82567LV Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
Operating System
Support
• Microsoft Windows Vista* Ultimate
• Microsoft Windows Vista Enterprise
• Microsoft Windows Vista Business
• Microsoft Windows Vista Home Premium
• Microsoft Windows Vista Home Basic
• Microsoft Windows Vista Ultimate 64-bit edition
• Microsoft Windows Vista Enterprise 64-bit edition
• Microsoft Windows Vista Business 64-bit edition
• Microsoft Windows Vista Home Premium 64-bit edition
• Microsoft Windows Vista Home Basic 64-bit edition
• Microsoft Windows* XP Media Center Edition 2005
• Microsoft Windows XP Professional
• Microsoft Windows XP Professional x64 Edition
• Microsoft Windows XP Home
®
Platform Innovation Framework for EFI
®
Rapid BIOS Boot
®
Express BIOS Update
®
Quiet System Technology (Intel® QST) fan speed control
For more information about Intel Desktop Board DG43NB, including the Technical
Product Specification (TPS), BIOS updates, and device drivers, go to
http://support.intel.com/support/motherboards/desktop/
.
10
Desktop Board Features
Desktop Board Components
Figure 1 shows the approximate location of the major components on Intel Desktop
Board DG43NB.
Figure 1. Intel Desktop Board DG43NB Components
11
Intel Desktop Board DG43NB Product Guide
Table 2. Intel Desktop Board DG43NB Components
Label Description
A PCI bus connector 3
B S/PDIF header
C PCI bus connector 2
D PCI bus connector 1
E PCI Express 1.1 x1 connector 3
F Chassis intrusion header
G Front panel audio header
H PCI Express 1.1 x1 connector 2
I PCI Express 2.0 x16 connector
J PCI Express 1.1 x1 connector 1
K Back panel connectors
L Rear chassis fan header (3-pin)
M 12 V processor core voltage connector (2 x 2 pin)
N Processor fan header (4-pin)
O Processor socket
P DDR2 DIMM 0, Channel A socket
Q DDR2 DIMM 0, Channel B socket
R Main power connector (2 x 12 pin)
S Front chassis fan header (3-pin)
T BIOS configuration jumper block
U IDE connector
V Serial header
W Serial ATA connectors (6)
X Front panel header
Y Alternate front panel power LED header
AA IEEE 1394a header
BB HD audio link header
CC High-speed USB 2.0 headers (3)
DD Battery
EE Speaker
For more information about Intel Desktop Board DG43NB, go to
http://intel.com/design/motherbd
12
Desktop Board Features
Processor
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin)
power connector to the Desktop Board may result in damage to the board, or the
system may not function properly.
Intel Desktop Board DG43NB supports an Intel processor in the LGA775 package.
Processors are not included with the Desktop Board and must be purchased
separately. The processor connects to the Desktop Board through the LGA775 socket.
Go to the following locations for more information about:
• Instructions on installing or upgrading the processor, page 29 in Chapter 2
• Supported
http://processormatch.intel.com
processors for Intel Desktop Board DG43NB,
Main Memory
NOTE
To be fully compliant with all applicable Intel ® SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The Desktop Board supports the dual or single channel memory configurations defined
below.
• Two 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module
(DIMM) connectors with gold-plated contacts
• Support for:
⎯ Non-ECC, 1.8 V, DDR2 800/667 MHz memory
⎯ Serial Presence Detect (SPD) memory only
⎯ Unbuffered, non-registered single- or double-sided DIMMs (except double-sided
DIMMs with x16 organization)
⎯ Memory configurations listed below:
• Up to 1.0 GB utilizing 256 Mb technology
• Up to 2.0 GB utilizing 512 Mb or 1 Gb technology
• Up to 4.0 GB utilizing 1 Gb technology
• A minimum of 512 MB of total memory is required
13
Intel Desktop Board DG43NB Product Guide
NOTE
System resources and hardware (such as PCI Express) require physical memory
address locations that can reduce available addressable system memory. This could
result in a reduction of as much as 1 GB or more of physical addressable memory
being available to the operating system and applications, depending on the system
configuration and operating system.
Go to the following locations for more information about:
• SDRAM specifications, http://intel.com/technology/memory/
• Installing memory, page 34 in Chapter 2
• Tested memory, http://cmtlabs.com/mbsearch.asp
Intel® G43 Express Chipset
The Intel G43 Express Chipset consists of the following devices:
• Intel G43 Express Chipset Graphics and Memory Controller Hub (GMCH) with Direct
Media Interface (DMI)
• Intel 82801JB I/O Controller Hub (ICH10) with DMI
The GMCH component provides interfaces to the processor, memory, PCI Express, and
the DMI interconnect. The component also provides integrated graphics capabilities
supporting 3D, 2D, and display capabilities. The ICH10 is a centralized controller for
the board’s I/O paths.
For more information on the Intel G43 Express Chipset go to
http://developer.intel.com/products/chipsets/
Intel G43 Graphics Subsystem
The Intel G43 Express Chipset contains two separate, mutually exclusive graphics
options. Either the integrated Intel Graphics Media Accelerator X4500 (GMA X4500)
graphics controller is used or a PCI Express x16 add-in card can be used.
The GMA X4500 graphics controller supports dual independent displays via the VGA
and DVI-D connectors on the Desktop Board back panel. When a PCI Express x16, x8,
or x4 add-in card is installed on the Desktop Board, the Intel GMA X4500 graphics
controller is disabled.
14
Desktop Board Features
The Intel GMA X4500 graphics controller has the following features:
• Advanced graphics performance, including:
⎯ DirectX10.0* and OpenGL* 2.0 compliant
⎯ Shader Model 4.0 support
• Enhanced video playback support, including:
⎯ Intel
®
Clear Video Technology (for more information go to
http://intel.com/products/chipsets/clear_video/
)
⎯ Support for playback of Blu-ray Disc* technology DVDs
⎯ Software DVD at 30 fps full screen
⎯ Dynamic Video Memory Technology (DVMT) support up to 358 MB
• Advanced display support, including:
⎯ DVI specification 1.0 compliant
⎯ Dual independent display support via the DVI-D and VGA back panel connectors
⎯ High Definition Content Protection (HDCP) version 1.1 support
⎯ DDC2B compliant interface with Advanced Digital Display 2 card or Media
Expansion Card (ADD2/MEC), support for TV-out/TV-in and DVI digital display
connections
⎯ Support for all HD display resolutions including 720p, 1080i, and 1080p
⎯ Support for digital and analog displays up to 2048 x 1536 at 75 Hz refresh rate
(QXGA); also supports 1920 x 1080 resolution for full High Definition video
playback quality
PCI Express x16 Graphics
The GMCH supports an add-in PCI Express discrete graphics card via the PCI
Express 2.0 x16 connector as follows:
• Supports PCI Express 1.1 frequency of 1.25 GHz resulting in 2.5 Gb/s each
direction (500 MB/s total). The maximum theoretical bandwidth on the interface is
4 GB/s in each direction simultaneously, for an aggregate of 8 GB/s when
operating in x16 mode.
• Supports PCI Express 2.0 frequency of 2.5 GHz resulting in 5.0 Gb/s each direction
(1000 MB/s total). The maximum theoretical bandwidth on the interface is 8 GB/s
in each direction simultaneously, for an aggregate of 16 GB/s when operating in
x16 mode.
For more information on PCI Express technology, go to http://pcisig.com
.
15
Intel Desktop Board DG43NB Product Guide
Audio Subsystem
The onboard audio subsystem consists of the following:
• Intel ICH10 I/O controller hub
• RealTek ALC888VC audio codec
• Intel High Definition Audio front panel audio header
• Intel High Definition Audio Link header
• Onboard 3-pin S/PDIF output connector
The audio subsystem supports the following features:
• A signal-to-noise (S/N) ratio of 95 dB
• Independent multi-streaming 5.1 audio (using the back panel audio connectors)
and stereo (using the Intel High Definition front panel audio header)
Go to the following locations for more information about:
• Audio drivers and utilities http://support.intel.com/support/motherboards/desktop/
• Location of the onboard audio headers, Figure 20 on page 43
• The location and
page 47
Table 3 lists the supported functions for the front panel and back panel audio jacks.
description of the back panel audio connectors, Figure 21 on
Table 3. Audio Jack Retasking Support
Jack Mic
Green No Yes No No No
Pink Yes No No No No
Blue No No Yes Yes No
Green No Yes No No No
Pink Yes No No No Yes
Line out/
Headphone
Line in
Front Panel
Rear Panel
Rear
Surround
Center/
Subwoofer
Legacy Input/Output (I/O) Controller
The I/O controller features the following:
• Low pin count (LPC) interface
• One serial port interface via an onboard header
• Serial IRQ interface compatible with serialized IRQ support for PCI systems
• PS/2-style mouse and keyboard interfaces
• Intelligent power management, including a programmable wake up event interface
• PCI power management support
16
Desktop Board Features
LAN Subsystem
The LAN subsystem includes:
®
• Intel
• Intel 82567V Gigabit (10/100/1000 Mb/s) Ethernet LAN controller
• RJ-45 LAN connector with integrated status LEDs
The subsystem features:
• CSMA/CD protocol engine
• LAN connect interface between ICH10 and the LAN controller
• PCI Express power management
For information about LAN software and drivers go to
http://support.intel.com/support/motherboards/desktop
LAN Subsystem Software
For LAN software and drivers, refer to the Intel Desktop Board DG43NB link on Intel’s
World Wide Web site at http://support.intel.com/support/motherboards/desktop
ICH10
.
LAN Status Indicators
Two LEDs are built into the RJ-45 LAN connector located on the back panel (see
Figure 2). These LEDs indicate the operating states of the LAN.
Figure 2. LAN Status LEDs
Table 4 describes the LED states when the board is powered up and the LAN
subsystem is operating.
17
Intel Desktop Board DG43NB Product Guide
Table 4. LAN Connector LEDs
LED LED Color LED State Indicates
A (Link) Off LAN link is not established
Blinking LAN activity is occurring
B (Speed)
Green
On LAN link is established
N/A Off 10 Mb/s data rate
Green On 100 Mb/s data rate
Yellow On 1000 Mb/s data rate
Hi-Speed USB 2.0 Support
The Desktop Board supports up to 12 USB 2.0 ports (six ports routed to the back
panel and six ports routed to three internal headers) via ICH10. USB 2.0 ports are
backward compatible with USB 1.1 devices. USB 1.1 devices will function normally at
USB 1.1 speeds.
USB 2.0 support requires both an operating system and drivers that fully support
USB 2.0 transfer rates. Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports
to USB 1.1 operation. This may be required to accommodate operating systems that
do not support USB 2.0.
Enhanced IDE Interface
The board’s IDE interface handles the exchange of information between the processor
and peripheral devices such as hard disk drives and CD-ROM drives. The interface
supports:
• Up to two IDE devices (such as hard drives)
• ATAPI-style devices (such as CD-ROM drives)
• Older PIO Mode devices
• Ultra DMA-33 and ATA-66/100 protocols
Serial ATA
The Desktop Board supports six Serial ATA channels (3.0 Gb/s) via ICH10, connecting
one device per channel.
Expandability
For system expansion, the Desktop Board provides the following expansion slots:
• One PCI Express 2.0 x16 connector (also compatible with PCI Express 1.1 add-in
cards)
• Three PCI Express 1.1 x1 connectors
• Three PCI bus connectors
18
Desktop Board Features
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the
PCI/PCI Express auto-configuration utilities, and the video BIOS. The BIOS is stored in
the Serial Peripheral Interface (SPI) Flash device.
The BIOS can be updated by following the instructions in Chapter 3.
Serial ATA Auto Configuration
If you install a Serial ATA device (such as a hard drive) in your computer, the autoconfiguration utility in the BIOS automatically detects and configures the device for
your computer. You do not need to run the BIOS Setup program after installing a
Serial ATA device. You can override the auto-configuration options by specifying
manual configuration in the BIOS Setup program.
PCI and PCI Express* Auto Configuration
If you install a PCI/PCI Express add-in card in your computer, the PCI/PCI Express
auto-configuration utility in the BIOS automatically detects and configures the
resources (IRQs, DMA channels, and I/O space) for that add-in card. You do not need
to run the BIOS Setup program after you install a PCI/PCI Express add-in card.
Security Passwords
The BIOS includes security features that restrict whether the BIOS Setup program can
be accessed and who can boot the computer. A supervisor password and a user
password can be set for the BIOS Setup and for booting the computer, with the
following restrictions:
• The supervisor password gives unrestricted access to view and change all Setup
options. If only the supervisor password is set, pressing <Enter> at the password
prompt of Setup gives the user restricted access to Setup.
• If both the supervisor and user passwords are set, you must enter either the
supervisor password or the user password to access Setup. Setup options are then
available for viewing and changing depending on whether the supervisor or user
password was entered.
• Setting a user password restricts who can boot the computer. The password
prompt is displayed before the computer is booted. If only the supervisor
password is set, the computer boots without asking for a password. If both
passwords are set, you can enter either password to boot the computer.
For instructions on resetting the password, see Clearing Passwords on page 51.
19
Intel Desktop Board DG43NB Product Guide
Hardware Management Features
The hardware management features of Intel Desktop Board DG43NB enable the board
to be compatible with the Wired for Management (WfM) specification. The board has
several hardware management features including the following:
• Fan speed monitoring and control
• Thermal and voltage monitoring
• Chassis intrusion detection
Fan Speed, Thermal, and Voltage Monitoring and
Control
The board’s fan speed, thermal, and voltage monitoring and control features include
the following:
• Monitoring of power supply voltages to detect levels above and below acceptable
values
• Intel Quiet System Technology fan speed control, delivering acoustically-optimized
thermal management
NOTE
Memory must be installed in the Channel A, DIMM 0 socket to enable Intel
• Thermally monitored closed-loop fan control, for all onboard fans, that can adjust
• Fan speed controllers and sensors integrated into ICH10
• Thermal sensors in the processor, the MCH, and ICH10, plus an onboard remote
NOTE
The minimum thermal reporting threshold for the MCH is 66 °C. The MCH thermal
sensor will display 66 °C until the temperature rises above this point.
Quiet System Technology.
fan speed according to thermal conditions.
sensor
Chassis Intrusion
The board supports a chassis security feature that detects if the chassis cover has
been removed. The security feature uses a mechanical switch on the chassis that can
be connected to the chassis intrusion header on the Desktop Board. See Figure 20 for
the location of the c
hassis intrusion header.
20
Desktop Board Features
Power Management Features
Power management is implemented at several levels, including:
• Software support through the Advanced Configuration and Power Interface (ACPI)
• Hardware support:
⎯ Power connectors
⎯ Fan headers
⎯ LAN wake capabilities
⎯ Instantly Available PC technology (Suspend to RAM)
⎯ +5 V standby power indicator LED
⎯ Wake from PS/2 Keyboard/Mouse
⎯ Wake from USB
⎯ Power Management Event signal (PME#) wakeup support
⎯ WAKE# signal wake-up support
• ENERGY STAR qualified
ACPI
ACPI gives the operating system direct control over the power management and Plug
and Play functions of a computer. The use of ACPI with the Desktop Board requires an
operating system that provides full ACPI support.
Hardware Support
Power Connectors
ATX12V-compliant power supplies can turn off the computer power through system
control. When an ACPI-enabled computer receives the correct command, the power
supply removes all non-standby voltages.
When resuming from an AC power failure, the computer returns to the power state it
was in before power was interrupted (either on or off). The computer’s response can
be set by using the Last Power State feature in the BIOS Setup program’s Boot menu.
The Desktop Board has two power connectors. See Figure 23 on page 49 for the
location of the power co
nnectors.
21
Intel Desktop Board DG43NB Product Guide
Fan Headers
The function/operation of the fans is as follows:
• The fans are on when the computer is in the ACPI S0 state.
• The fans are off when the computer is in the ACPI S3, S4, or S5 state.
• All fan headers support closed-loop fan control that can adjust the fan speed
according to thermal conditions.
• All fan headers have a +12 V DC connection.
The Desktop Board has a 4-pin processor fan header, two 3-pin chassis fan headers,
and one 4-pin chassis fan header.
LAN Wake Capabilities
CAUTION
For LAN wake capabilities, the 5 V standby line for the power supply must be capable
of delivering adequate +5 V standby current. Failure to provide adequate standby
current when using this feature can damage the power supply.
LAN wakeup capabilities enable remote wake-up of the computer through a network.
The LAN subsystem monitors network traffic and upon detecting a Magic Packet*
frame, it asserts a wake-up signal that powers up the computer.
Instantly Available PC Technology
CAUTIONS
For Instantly Available PC technology, the 5 V standby line for the power supply must
be capable of delivering adequate +5 V standby current. Failure to provide adequate
standby current when using this feature can damage the power supply and/or effect
ACPI S3 sleep state functionality.
Power supplies used with this Desktop Board must be able to provide enough standby
current to support the standard Instantly Available (ACPI S3 sleep state) configuration.
If the standby current necessary to support multiple wake events from the PCI and/or
USB buses exceeds power supply capacity, the Desktop Board may lose register
settings stored in memory.
Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep state. While in the S3 sleep state, the computer will appear to be off. If
the computer has a dual-colored power LED on the front panel, the sleep state is
indicated by the LED turning amber. When signaled by a wake-up device or event, the
computer quickly returns to its last known awake state.
The Desktop Board supports the PCI Bus Power Management Interface Specification.
Add-in cards that support this specification can participate in power management and
can be used to wake the computer.
22
Desktop Board Features
+5 V Standby Power Indicator
CAUTION
If the AC power has been switched off and the standby power indicator is still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
The Desktop Board’s standby power indicator, shown in Figure 3, is lit when there is
standby power still present on the board even when the computer appears to be off.
For example, when this green LED is lit, standby power is still present at the memory
module sockets and the PCI/PCI Express bus connectors.
Figure 3. Location of the +5 V Standby Power Indicator
For more information on standby current requirements for the Desktop Board, refer to
the Technical Product Specification by going to
http://support.intel.com/support/motherboards/desktop/
clicking on the Technical Documents tab.
, finding the product, and
Wake from USB
NOTE
Wake from USB requires the use of a USB peripheral that supports Wake from USB.
USB bus activity wakes the computer from an ACPI S3 state.
Wake from PS/2 Keyboard/Mouse
PS/2 keyboard/mouse activity wakes the computer from an ACPI S3 state.
PME# Signal Wake-up Support
When the PME# signal on the PCI bus is asserted, the computer wakes from an
ACPI S3, S4, or S5 state.
23
Intel Desktop Board DG43NB Product Guide
WAKE# Signal Wake-up Support
When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from
an ACPI S1, S3, S4, or S5 state.
ENERGY STAR* Qualified
In 2007, the US Department of Energy and the US Environmental Protection Agency
revised the ENERGY STAR requirements. Intel worked directly with these two
governmental agencies to define the new requirements. This Desktop Board meets
the ENERGY STAR Category B requirements.
For information about the ENERGY STAR specifications, see
http://intel.com/go/energystar
.
Speaker
A speaker is mounted on the Desktop Board. The speaker provides audible error code
(beep code) information during the Power-On Self-Test (POST).
Battery
A battery on the Desktop Board keeps the values in CMOS RAM and the clock current
when the computer is turned off. Go to page 52 for instructions on how to replace the
battery.
Real-Time Clock
The Desktop Board has a time-of-day clock and 100-year calendar. The battery on the
Desktop Board keeps the clock current when the computer is turned off.
24
Loading...