A reference guide to assist customers in ordering the necessary components to
configure the Intel® Server BoardS5520UR and the appropriate 1U and 2U Intel Rack
Mount Server Systems
Server System
Server Server
Accessories List and Configuration Guide
AccessoriesAccessories
System SR2
SystemSystem
SR2625UR
SR2 SR2
List and Configuration Guide
List and Configuration Guide List and Configuration Guide
Enterprise Platforms and Services Marketing
625URLX
625UR625UR
LX
LXLX
Revision 1.0
February 2009
Page 2
Revision History
April ’08- Rev 0.1 – Initial release for alpha
May ’08 – Rev 0.2 – Updated for beta board and systems
July ’08 – Rev 0.3 – Updated beta configuration guide
August ’08 – Rev 0.5 – Updated for silver board and systems
October `08 – Rev 0.6 – Silver corrections
November `08 – Rev 0.9 – Updated for production board and systems
February `09 - Rev 1.0 – Ready for open books
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS.
NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S
TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO
SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO
FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY
PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life saving, life sustaining applications. Intel may make
changes to specifications and product descriptions at any time, without notice.
Intel server boards, server chassis, and processors may contain design defects or errors known as
errata, which may cause the product to deviate from published specifications. Current characterized
errata are available on request.
Intel, Xeon, Pentium, and the Intel logo are trademarks or registered trademarks of Intel Corporation or
its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
2.4 SYSTEM SPARES AND ACCESSORIES................................................................................................................... 12
2.5 POWER SUB-SYSTEM SPARES AND ACCESSORIES .............................................................................................. 15
2.6 CONTROL PANEL SPARES AND ACCESSORIES ..................................................................................................... 16
2.7 RISER SPARES AND ACCESSORIES ...................................................................................................................... 16
2.8 RAILS AND MOUNTING OPTIONS .......................................................................................................................... 17
2.9 CHASSIS AND ELECTRICAL SPARES KITS ............................................................................................................. 18
3
Page 4
1. System Product Order Codes
1.1 Product Descriptions – Overview
Product based on the Intel® Server Board S5520UR will be offered in two methods at production:
1. Intel® Server Systems (Integrated SKUs). Customer orders an integrated system. All
systems – except SR1600URHS – do not have required options, and are complete.
All systems do not include processors, DDR3 main memory, hard drives, and other customer
configuration items
2. 10 Pack Server Board SS5520UR. Intended for customers utilizing 3rd party chassis or for
customers requiring spare boards.
* Chassis will not be offered separately.
1.2 Board and System Product Order Codes
Not included in systems: Processors, DDR3 main memory, hard drives, and other customer
configuration items are not included in below SKUs.
Image
Product Code
MM
UPC
Description
BB5520UR
901085
735858206587
SR1600UR
900983
735858206723
Intel Server Board S5520UR (shipped in bulk pack of 10)
Intel Server System SR1600UR fixed configuration.
Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR1600
• Cabled front panel (no video port
• Three 3.5" fixed HDD sleds,
• One full height riser with PCI Express x16 2.0 slot
• One fixed high-efficient 600W power supply
• Fan-board
• SATA and power cables to connect 3 HDDs,
• Seven DIMM blanks
• Two processor heatsinks.
For complete list of accessories – please reference section 2.
Minimum
Order
Quantity
10
1
4
Page 5
SR1600URNA
Same as SR1600UR but with North American power cord.
1
900985
NA
SR1600URHS
900985
735858206730
SR1600URHSNA
901126
Intel Server System SR1600URHS Hot-Swap configuration.
Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR1600
• Standard control panel,
• Three 3.5" HDD carriers,
• One full height riser with PCI Express 2.0 x16 slot,
• One fixed high-efficient 600W power supply
• Seven DIMM blanks
• Two processor heatsinks.
Does not include backplane.
*NOTE: System Backplane must be ordered separately to
complete system.
Required accessory (choose one of two options):
To obtain SAS/SATA HotSwap functionality – need to order
Active Backplane – ASR1500SASBP (offers onboard SAS
controller with SW RAID support).
To obtain SATA HotSwap functionality – need to order
ASR1500PASBP, which allows cabled pass-through connection
from motherboard or add-in controller.
For complete list of accessories – please reference section 2.
Same as SRURHS but with North American power cord.
1
1
NA
SR1625UR
900986
735858206747
Intel Server System SR1625UR passive configuration.
Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR1625
• mini control panel,
• 6 of 2.5" HDD carriers (and filler in slots 7&8)
• 1 full height full length riser with PCI Express 2.0 x16
slot,
• 1 passive SAS/SATA midplane,
• 7 DIMM blanks
• 2 processor heatsinks
• 1 hot-swap and redundant capable high-efficient 650W
power supply.
Key Optional accessories:
To enable redundant power supply feature – order additional
power supply ASR1625PS
To add SW Raid5 support – order AXXRAKSW5 key.
To add HW raid functionality: need to install add-in PCI HW
Raid controller, which must be cabled to Passive Midplane.
1
5
Page 6
Alternatively, Passive Midplane may be replaced with Active
(FALSASMP2)
To add support for 8 drives by add-in controller – order
additional 2.5” HDD drive carriers ( available in 10 pack
FXX25HDDCAR).
To add Standard Control Panel - order ASR1625FP.
*Note: Only one control panel (Mini, Standard, or Local) can be
used in a system at a time.
*Note: Standard CP and two additional drives are installed in
the same bay, and can not be installed at the same time.
For complete list of accessories – please reference section 2.
SR1625URNA
901132
Same as above but with North American power cord
1
NA
SR1625URSAS
900987
735858206754
SR1625URSASNA
901136
Intel Server System SR1625UR active configuration.
Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR1625
• Mini control panel,
• 6 2.5" HDD carriers (and filler in slots 7&8)
• 1 full height full length riser with PCI Express 2.0 x16
slot,
•Active Midplane2 board with 8-port SAS controller
upgradeable to HW RAID mode,
• 7 DIMM blanks
• 2 processor heatsinks
• 1 hot-swap and redundant capable high-efficient 650W
power supply
Key Optional Accessories:
To enable redundant power supply feature – order additional
power supply (ASR1625PS)
To add HW raid functionality of Active Midplane2: order Raid
key (AXXRAKSAS2) , minidimm (AXXMINIDIMM512). RAID
cache battery backup is optional (AXXRSBBU3).
To add support for 8 drives by SAS controller on Active
Midplane2– order two additional 2.5” HDD drive carriers
(FXX25HDDCAR).
To add Standard Control Panel - order ASR1625FP.
*Note: Only one control panel (Mini or Standard) can be used in
a system at a time.
*Note: Standard CP and the two right most drives are installed
in the same bay, and can not be installed at the same time.
For complete list of accessories – please reference section 2.
Same as above but with North American power cord
1
NA
6
Page 7
SR2600URBRP
901093
735858206761
SR2600URBRPNA
901187
Intel Server System SR2600UR system in base-passive
configuration. Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR2600
• Standard control panel,
• 5 3.5" HDD carriers,
• 3 fixed, non redundant fans
• Tape drive bay filler
• 1 riser with three full-height PCI Express 2.0 x8 wired
slots (one x16 and two x8 connectors),
• passive SAS/SATA midplane,
• 7 DIMM blanks
• 2 processor heatsinks
• 1 hot-swap and redundant capable high-efficient 750W
power supply
KeyOptional accessories:
To enable power supply redundancy – order AXX750WPS
To upgrade cooling system to redundant– order
ASR2600LXFANS.
To add support for 6th hot-swap 3.5 inch drive – order
ASR2500SIXDRV
To change PCI expansion slots – included riser must be
replaced with ASR26XXFHLPR or ASR26XXFHXR
To add support for SATA Tape Drive – order ASR2500SATAPE
*NOTE: ASR2500SIXDRV and ASR2500SATAPE are installed
in the same bay and can not be installed at the same time.
For complete list of accessories – please reference section 2.
Same as above but with North American power cord
1
1
NA
SR2600URLX
900988
735858206778
Intel Server System SR2600UR in active-SAS configuration.
Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR2600
• Standard control panel,
• 5 3.5" HDD carriers,
• 6 redundant and hotswap fans
• Tape drive bay filler
• 1 active butterfly riser with five PCI Express 2.0 x8
wired slots (two full-height x16 connectors, one fullheight x8 connector and two low-profile x8
connectors),
•active Midplane2 board with SAS controller
upgradeable to HW RAID mode,
• 7 DIMM blanks
• 2 processor heatsinks
• 1 hot-swap and redundant capable high-efficient 750W
power supply
Key Optional Accessories:
1
7
Page 8
To enable power supply redundancy – order AXX750WPS
To add PCI-X support – included riser must be replaced with
ASR26XXFHXR
To add support for two fixed 2.5inch SATA drives – order
ASR2600FXDRV (requires drives to be cabled to two open
SATA ports)
To add support for 6th hot-swap 3.5 inch drive – order
ASR2500SIXDRV
To add support for SATA Tape Drive – order ASR2500SATAPE
*NOTE: ASR2500SIXDRV and ASR2500SATAPE are installed
in the same bay and can not be installed at the same time.
For complete list of accessories – please reference section 2.
SR2600URLXNA
901131
Same as above but with North American power cord
1
NA
SR2625URBRP
900989
735858206785
SR2625URBRPNA
901141
Intel Server System SR2625UR in base-passive
configuration. Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR2625
• Standard control panel
• 6 2.5" HDD carriers (and filler in slots 7&8)
• 3 fixed, non redundant fans
• Tape drive bay filler
• 1 full-height riser with three PCI Express 2.0 x8 wired
slots (one x16 connector and two x8 connectors),
• 1 passive SAS/SATA midplane,
• 7 DIMM blanks
• 2 processor heatsinks
• 1 hot-swap and redundant capable high-efficient 750W
power supply
Key Optional Accessories:
To enable power supply redundancy – order AXX750WPS
To add or change PCI expansion slots – included riser must be
replaced with ASR26XXFHLPR or ASR26XXFHXR
To add support for SATA Tape Drive – order ASR2500SATAPE
For complete list of accessories – please reference section 2.
Same as above but with North American power cord
1
1
NA
SR2625URLX
900990
735858206792
Intel Server System SR2625UR system in SAS
configuration. Includes:
• Intel Server Board S5520UR
• Intel Server Chassis SR2625
• Standard control panel,
• 8 2.5" HDD carriers,
• 6 redundant and hot-swap fans
• Tape drive bay filler
• 1 active butterfly riser with five PCI Express 2.0 x8
1
8
Page 9
wired slots (two full-height x16 connectors, one fullheight x8 connector and two low-profile x8
connectors),
•active Midplane2 board with SAS controller
upgradeable to HW RAID mode,
• 7 DIMM blanks
• 2 processor heatsinks
• 1 hot-swap and redundant capable high-efficient 750W
power supply
Key Optional Accessories:
To enable power supply redundancy – order AXX750WPS
To add PCI-X support – included riser must be replaced with
ASR26XXFHXR
To add support for SATA Tape Drive – order ASR2500SATAPE
For complete list of accessories – please reference section 2.
SR2625URLXNA
901129
Same as above but with North American power cord
1
NA
9
Page 10
2. Spares and Accessories Order Codes
2.1 I/O Modules
Image
Product Code
AXX10GBIOMOD
Avail. Post SRA.
AXX4GBIOMOD2
735858206532
AXXIBQDRMOD
Avail. Post SRA.
MM
UPC
901359
Description
10GbE I/O module Dual port CX4 connector.
Quad port GbE I/O module. RJ-45
connectors.
Single port QDR speed InfiniBand I/O
Module. CX4 powered connector.
Minimum
Order
Quantity
1
1
1
AXX4SASMOD
900946
00735858206372
AXXROMBSASMR
901641
735858208017
AXXIBIOMOD
881891
735858185219
Internal 4-port SAS module, based on LSI
1064e controller, with Em bedded RAID
support. (primarily targeted at non-intel
chassis)
Internal 4-port SAS module, based on LSI
1078e controller. Provides 4 port full featured
SAS/SATA RAID 0,1,5, 6 and striping
capability for spans 10, 50, 60. (primarily
targeted at non-intel chassis)
InfiniBand I/O Expansion Module, SDR
speed. Compatible with Intel Server Boards
S5000PALR and S5520UR.
1
1
1
10
Page 11
AXXGBIOMOD
880518
735858184779
Dual Port Gigabit Ethernet I/O Expansion
Module. Compatible with Intel Server Boards
S5000PALR and S5520UR
1
AXXSASIOMOD
880517
735858184786
2.2 SR2600/SR2625 Flex Bay Kits
Product Code
Image
ASR2500SATAPE
MM
UPC
881260
735858184069
External 4 port SAS I/O Expansion Module.
Compatible with Intel Server Boards
S5000PALR and S5520UR
Full extending Rail Kit, also compatible with
SR1500/2500 chassis (new and improved
design replacing AXXHERAIL. Existing
AXXHERAIL may still be used with
16xx/26xx chassis)
Cable Management Arm (Must be used with
AXXHERAIL2, not compatible with
AXXHERAIL)
10
Minimum
Order
Quantity
1
1
AXXBASRAIL13
899080
735858194969
Basic rail kit. Does not support Cable
Management Arm.
17
1
Page 18
AXXBRACKETS
863262
735858168618
2.9 Chassis and Electrical Spares Kits
Fixed Mount Brackets. Set of brackets to
hard mount chassis to rack. Supports 4 post
mounting and 2 post center mounting.
(Reused from SR1500/SR2500 system)
1
Image
Product Code
MM
UPC
FSRTCHSPR
901994
735858208086
FSR1600EESPR
901005
735858206600
Description
Combined chassis mechanical spare kit for
SR16xx and SR26xx systems. Includes:
•Baffle for power supply-backplane area
for SR2600
•Baffle for power supply-backplane area
for SR2625
• 1U and 2U CPU Ducts
• PS Blank Filler
• RMM3 Filler Panel
• IO Module Filler Panel
• Hard Drive Carriers (3.5” & 2.5”)
• SR26XX Non-redundant Fan Structure
• Tape Drive Filler
• CD tray w/Standoffs
• Plastic Optical Drive guide + 2 screws
• Optical Drive Filler Panel (3.5")
• Die cast metal rack handles (set)
• Seven Dimm Blanks
• Misc Hardware (screws, thumbscrews,
etc)
• Processor Fan Bracket
• SR1615 PS Air Baffle (/w Thumbscrew)
• CD Tray w/o Standoffs
• SR 1600 PS baffle
SR1600 Electrical spare kit. Includes:
• Bridge Board
• HS SKU Front panel board
• Fixed SKU front panel board
• Fan distribution board
• 1U riser (FSR16XXRISER)
• HS SKU50 pin front panel cable
• HS SKU USB front panel cable
• Fixed SKU front panel cable
• Fixed SKU USB front panel cable
• 2 SATA cabled for fixed HDDs
• Fixed SKU fan control cable
• Two backplane thumb skrews
• One 56mm non-redundant fan
Minimum
Order
Quantity
1
1
18
Page 19
FSR1625EESPR
901007
735858206631
FSR26XXEESPR
901995
735858208093
SR1625 Electrical spare kit. Includes
• Bridge Board
• 2.5” HSBP
• Mini front panel board
• 1U PCIe riser (FSR16XXRISER)
• Front panel cable
• USB front panel cable
• I2C cable
• SATA cable harness (6 cables)
• One 56mm fan with short cable
• One 56mm fan with long cable
• Power distribution board
SR2600 and SR2625 Electrical Spare Kit.
Includes following system components:
• Bridge Board
• 2.5” HSBP for SR2625
• 3.5: HSBP for SR2600
• Docking front panel board (for SR2600)
• Cabled front panel board (for SR2625)
• Optical drive interposer
• Front panel cable
• Front panel USB cable
• Two 115mm+130mm redundant fan
bracket cable assembly
• One 140mm+140mm redundant fan
bracket cable assembly
• SATA I2C cable
• SATA cables harness
• One 80mm non-redundant fan
• One 80mm redundant fan
• One 60mm non-redundant fan
• One 60mm redundant fan.
• Power distribution module.
1
1
19
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.