Integrated Engineering
USB readers
Specifications
Typical read range with an ISO Card
ISO14443-3 0 - 5 cm
ISO14443-4 0 - 5 cm
Read range depends on card type and
communication speed.
Dimensions
Board 70 x 40 mm
SmartID 142 x 46 x 25 mm
Desktop 142 x 76 x 32 mm
Material enclosure
SB housing with polyurethan potting
Operating temperature
-20° to 60° C
Certifications
CE
Features
The ISO14443 USB reader is available in three
variations. The Smart ID USB Desktop Reader has a
slim design to match any décor. The stylish SmartID
mullion reader allows for installation on narrow
surfaces as door styles. The module is especially
design for integration in other products.
All three readers allow for connection to a host via an
USB connector. The Smart ID Reader offers high
reliability, consistent read characteristics.
The ISO14443 USB Readers supports ISO 14443-3A
and both ISO14443-4 A&B 13.56MHz contactless
smart cards technologies. Standard operation modes
are Host controlled or dedicated stand-alone mode.
The Smart ID desktop and mullion reader can be
mounted on any surface without relevant performance
degradation. Our commitment is to bring non-
propriety, open Radio Frequent Identification (RFID)
systems to the market demonstrated with the Smart
ID Reader Family.
Indications
The readers incorporate red and green LED’s and a
buzzer that are fully host controllable.
Connections
The ISO14443 USB readers connect to a host via a
"mini-USB" connector on the reader.
Interface Coding
The ISO14443 USB reader complies to USB 2.0.
Security
Depending on technology used the ISO 14443-4 USB
readers provide high security schemes as challenge
response to protect the RFID air interface against
record playback attacks.
Conformity
Consult your National Authority if any
authorization is needed for this product.
This device complies with the CE Rules.
Operation is subject to
conditions:
1) that this device does not cause harmful
interference, and
2) that this device must accept any interference
received, including interference that may cause
undesired operation.
Type/article
ISO 14443-4 (T=CL) reader USB
artnr 500-8080, SmartID/ISO14443-4/USB
Desktop ISO 14443-4 USB Sector reader
artnr 500-8230, Desktop/ISO14443-4/USB
Module ISO 14443-4 (T=CL) reader USB,
artnr 500-1087, Module/ISO14443-4/USB
Integrated Engineering
Amsterdam
The Netherlands
Phone: +31 20 4620755
Fax: +31 20 4620756
Email: info@ieprox.com
WWW: http://www.ieprox.com
the following two
Ref : V1.0 16/7/2004
Loading...