Integral INSSD512GM.26M2280 User Manual
i
Product Specification
Integral M.2 SATA III 22x80
i
The Integral M.2 next generation form factor
SATA 6Gbps MLC SSD delivers all of the
advantages of flash memory technology for
SATA based computers.
M.2 SATA SSD storage solutions are designed for
Notebooks, Desktops, Ultrabooks and tablets.
They address the need for more low powered
compact storage without compromising
performance and reliability of solid state drives.
FEATURES
• M.2 2280 form factor with SATA III 6Gbps interface (backwards
compatible with SATA 3Gbps and SATA 1.5Gbps)
• Supports ‘M’ & ‘B’ Key sockets
• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased efficiency
• Fully compatible with devices and OS that support the SATA
standard with M.2 M and B socket
128
GB
• Shock resistance - No moving parts enable the product to be
used in tougher conditions
• Silent operation - Noiseless and low heat dissipation
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and Reporting
Technology
• RoHS compliant
• CE and FCC tested
• Warranty – 3 Years
256
GB
512
GB
1
TB
• Non-volatile Flash Memory for outstanding data retention -
Less likely to fail than HDD
• Ultra-efficient Block Management and Static and Dynamic
Wear Leveling
• Lower Power Consumption
Rev:4
i
Product Specification
i
PERFORMANCE Sequential Speed (up to)
128GB
256GB
512GB
1TB
Read 530MB/s (up to)*
Write 430MB/s (up to)*
Read 530MB/s (up to)*
Write 430MB/s (up to)*
Read 560MB/s (up to)*
Write 530MB/s (up to)*
Read 360MB/s (up to)*
Write 300MB/s (up to)*
INTERFACE
Interface
NAND MLC
Form Factor
Standard
SATA III 6Gbps
Also Compatible with SATA II
3Gbps and SATA 1.5Gbps
M.2 22x80 ‘M’ & ‘B’ Key
connector
M.2 (previously known as Next
Generation Form Factor (NGFF))
CAPACITY PART CODE BARCODE (EAN)
128GB INSSD128GM.26M2280 5055288427402
256GB INSSD256GM.26M2280 5055288427587
512GB INSSD512GM.26M2280 5055288429369
1TB INSSD1TM280 5055288434516
1. Performance based on “out of the box” internal testing measured under ambient temperature.
Sequential R/W is measured using ATTO.
2. Power Consumption may differ according to flash configuration and platform.
1GB = 1,000,000,000 bytes. Formatted capacity is less.
This device should not be used as your sole backup.
Product design and specification subject to change or modification without notice. E&OE.
All trademarks acknowledged.
For warranty information please visit www.integralmemory.com/warranty
POWER CONSUMPTION
Supply Voltage 3.3V
Read: 128GB = 1760 / 256GB =
1960 / 512GB = 2023 / 1TB = 1980
Power Consumption (mW)
MTBF
Write: 128GB = 1410 / 256GB
= 1730 / 512GB = 3357 / 1TB =
3430
Idle: 128GB, 256GB, 512GB =
285 / 1TB = 960
>1.5 Million Hours
ENVIRONMENTAL
Operating Temp 0° to +70°C
Non - Operating Temp -40° to +85°C
Supports SMART Software Yes
Compliancy CE, FCC, RoHS
DIMENSIONS
Length 80mm
Width 22mm
Height 3.8mm
Weight 6g
Length (Packed) 120mm
Width (Packed) 64mm
Depth (Packed) 8mm
Weight (Packed) 15g
WARRANTY
3 years
*Based on internal testing
Rev:4
Loading...