Integral INSSD480GS625M7XP4 User Manual

i

Product Specification

P Series 4 SATA III 6Gb/s 2.5” SSD

i

READ 565MB/s*
WRITE 530MB/s*

INTRODUCTION

The Integral P Series 4 SSD offers exceptional
performance levels and great value. It is ideal for
use in desktops and laptop computers.

The Performance Series SSD has a great combination
of fast data read/write and reliability, along with
low power operation - to make this the ideal hard
disk drive replacement.

Choose the P Series 4 SSD to boost the performance of
your existing hardware and extend its useful life.
It will speed up your daily OS boot times and increase
the speed of your applications, overall giving you the
best experience of Solid State performance computing.

KEY BENEFITS

• Providing an industry-leading bandwidth of more

than 565MB/sec transfers, the Integral P Series 4 SSD can
approach the limits of the SATA III 6Gb/s interface on
large transfers.

• A robust ECC algorithm corrects up to 120 bits error

in 2K Byte data. Efficient bad block management
and reduced write amplification further increases
endurance. Drive health is monitored using an SSD­specific set of S.M.A.R.T. attributes. The combination of
these techniques provides excellent data protection.

BENEFITS

• Enhanced performance: faster boot than HDD, faster

access to applications, enhanced productivity and increased
efficiency

• Read up to 565MB/s*, Write up to 530MB/s*

120

GB

• No mechanical parts

- Highest reliability; less likely to fail than HDD

- Extreme shock resistance

- Zero noise

- No heat generation

• Low power consumption - improved battery life on
laptops/netbooks

240

GB

480

GB

960

GB

FEATURES

• 2.5 inch form factor with SATA III 6Gbps interface

(backwards compatible with SATA 3Gbps and SATA 1.5Gbps)

• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased efficiency

• Fully compatible with devices and OS that support the
SATA standard

• Non-volatile Flash Memory for outstanding data
retention - Less likely to fail than HDD

• Ultra-efficient Block Management and Wear Leveling

• Error Correction Code

• Lower Power Consumption

• Shock resistance - No moving parts enable the product to

be used in tougher conditions

• Silent operation - Noiseless and low heat dissipation

• Supports S.M.A.R.T. - Self-Monitoring, Analysis and

Reporting Technology

• RoHS compliant

• CE and FCC tested

• 3 Year Warranty

Rev:5

i

Product Specification

i

Technical Features

• SATA III 2.5”

• TRIM (OS support required)

• S.M.A.R.T. option

• CE and FCC certified and RoHs compliant

7mm to 9mm Adapter supplied with packaged product

Bottom View

Side View

CAPACITIES & INTERFACE

Capacities available 120GB, 240GB, 480GB, 960GB

Form Factor 2.5 Inch

NAND TLC

Controller Phison S10

Interface

Sequential Speed (up to)*

SATA III 6Gbps
Also Compatible with SATA II 3Gbps
Also compatible with SATA 1.5Gbps

120GB = READ 560MB/s, WRITE 420MB/s
240GB = READ 565MB/s, WRITE 490MB/s
480GB = READ 565MB/s, WRITE 530MB/s
960GB = READ 560MB/s, WRITE 500MB/s

DIMENSIONS

Length mm 100.00

Width mm 69.85

Height mm 7.0

Weight 50g

Packaged Weight 64g

Packaged Dimensions
(mm)

L = 133, W = 117, D = 13

POWER CONSUMPTION

Power Management

Power Consumption
(mW)***

5V
120GB - Read 2,290, Write 2,730, Idle 175

240GB - Read 2,290, Write 2,730, Idle 175
480GB - Read 2,510, Write 5,260, Idle 185
960GB - Read 2,620, Write 3,655, Idle 195

ENVIRONMENTAL

Operating Temp 0° - +70°C

Storage Temp -40° - +85°C

Humidity**** RH 90% under 40°C (operational)

FEATURES

Supports SMART Software Yes

Supports TRIM Yes (OS support required)

ECC scheme Corrects up to 120 bits error in 2K Byte data

MTBF >2 Million Hours

Compliancy CE, FCC, RoHS

WARRANTY

3 years

Rev:5

CAPACITY PART CODE BARCODE (EAN)

120GB INSSD120GS625M7XP4 5055288428560

240GB INSSD240GS625M7XP4 5055288428577

480GB INSSD480GS625M7XP4 5055288429246

960GB INSSD960GS625M7XP4 5055288429253

*Based on internal testing measured under ambient temperature.Sequential R/W is measured using ATTO.

***Power Consumption may differ according to flash configuration, SDR configuration, and platform.

****Humidity test was for 4 hours

E&OE. Product design and specification subject to change or modification without notice.