Integral INSSD128GM280NM1 User Manual

i
Product Specification
M Series M.2 2280 PCIe NVMe SSD
®
i
READ 2000MB/s*
WRITE 1600MB/s*
READ 221K IOPS*
WRITE 244K IOPS*
INTRODUCTION
M Series M.2 2280 PCIe Gen3x4 NVMe SSD
The M.2 NVMe Solid State Drive can meet your most demanding gaming, graphic design, and video workflow needs. Delivering super-fast speeds of up to 2000MB/s read and 1600MB/s write, with IOPS of up to 244K.
• M.2 PCIe NVMe SSDs are up to four times faster in performance when compared to SATA SSDs and are compatible with most computing hardware and software that support the NVME standard, including small form factor machines (e.g Intel NUC), Ultrabooks and enthusiast desktops
• Choose the M.2 PCIe NVMe SSD to break through the 6Gbps SATA limitation for your performance needs. Specifically engineered to compliment high-specification machines and provide the best gaming and multimedia application performance that is ultra-responsive
128
GB
256
GB
512
GB
1
TB
KEY BENEFITS:
Good balanced high performance PCIe Gen3x4 conforming to the NVMe 1.2 standard. Achieving up to 2000MB/s* read and 1600MB/s* write, the Integral M.2 PCIe SSDs break through the 6Gbps SATA limitation that takes computing performance to the next level
• Random IOPS up to 244K
• Gamers will benefit from faster loading times, exceptional performance and a more enjoyable gaming experience
• Power-users, content editors, graphic designers and general multi-taskers will all benefit from an ultra­responsive system and super-fast boot
• Improved video workflow when used in machines that work with: Digital film recording, live broadcast, video editing, colour correction and visual effects
• Supports SSD enhanced set of S.M.A.R.T. attributes
BENEFITS:
• Performance up to four times faster than a conventional
SATA SSD
- Sequential Read up to 2000MB/s*, Write up to 1600MB/s*,
Random 244K IOPS*
• No mechanical parts
- Highest reliability; less likely to fail than HDD
- Extreme shock resistance
- Zero noise
- No heat generation
• Low power consumption - improved battery life on
laptops/netbooks
Rev:3
*Up to performance may vary depending on host device. (1TB model performance)
i
Product Specification
i
FEATURES
• PCIe Gen3x4
• Compliant with PCI Express Base Specification Rev 3.1
• Compliant with NVMe 1.2
• Non-volatile Flash Memory for outstanding data retention
• Ultra-efficient Block Management and Wear Levelling
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and Reporting Technology
• 3 Year Warranty
CAPACITIES & INTERFACE
Capacities available 128GB, 256GB, 512GB, 1TB
Controller Technology Silicon Motion SM2263XT
NAND 3D TLC
Form Factor M.2 2280
Interface NVMe PCIe Gen 3x4
Compliance
Sequential Perfomance
1
up to
Random Performance
1
up to
DIMENSIONS
Length mm 80
Width mm 22
Height mm (MAX) 2.25
Weight 10g
Packaged Weight 58g
Packaged Dimensions (mm)
Compliant with PCI Express Base Specification Rev 3.1 NVMe 1.2
128GB = READ 1800MB/s WRITE 600MB/s 256GB = READ 2000MB/s WRITE 1200MB/s 512GB = READ 2000MB/s WRITE 1600MB/s 1TB = READ 2000MB/s WRITE 1600MB/s
128GB = READ 110K I0PS, WRITE 151K I0PS 256GB = READ 179K I0PS, WRITE 140K I0PS 512GB = READ 188K I0PS, WRITE 156K I0PS 1TB = READ 221K I0PS, WRITE 244K I0PS
L = 79, W = 21, D = 1
POWER CONSUMPTION
Power Management
Power Consumption
5
(mW)
+3.3V (-+5%) READ WRITE IDLE
128GB - 2870 2360 680 256GB - 3040 2940 690 512GB - 3070 3510 690 1TB - 2940 2760 330
ENVIRONMENTAL
Operating Temp
Storage Temp -40° - +85°C
Humidity
Linear Shock (non-operating)
Vibration (non-operational)
2
6
0° - +70°C
5% to 95% non-condensing
1500G, duration 0.5ms, half sine wave
Frequency 700Hz~800Hz
3.08g 30min/axis X,Y,Z
FEATURES
Supports SMART Software Yes
Supports TRIM Yes (OS support required)
3
MTBF
4
Endurance (TBW
Compliancy CE, FCC, RoHS
)
1.5 Million Hours >2 Million Hours (1TB)
128GB - 64TB 256GB - 128TB 512GB - 256TB 1TB - 480TB
WARRANTY
3 years or TBW
CAPACITY PART CODE BARCODE (EAN)
128GB INSSD128GM280NM1 5055288443358
256GB INSSD256GM280NM1 5055288443365
512GB INSSD512GM280NM1 5055288443372
1TB INSSD1TM280NM1 5055288445383
Notes:
1. Actual performance may vary and depends on use conditions, host and environment
2. Operating temperature is the drive case temperature as measured by the SMART temperature attribute
3. Mean Time Between Failures is estimated based on JEDEC-218/219 standard methodology
4. TBW (Terabytes Written) DWPD (Drive Write Per Day). TBW and DWPD is a measurement of SSDs expected lifespan, which represents the amount of data written to the device. This is only an estimate and can differ based in user usage behaviour, platform and estimates provided by the flash vendor
5. Power Consumption may differ according to flash configuration and platform
6. Humidity test was for 4 hours
Rev:3
All Specifications are subject to change without notice
1GB = 1,000,000,000 Bytes, 1TB = 1,000,000,000,000 Bytes; 1 sector = 512 Bytes.
The total usable capacity of the SSD may be less than the total physical capacity because a small portion of the capacity is used for NAND flash management and maintenance purposes.
Loading...
+ 1 hidden pages