Integral INSSD120GS625V2 User Manual
i
Product Specification
Integral V Series 2.5’’ SATA III 6Gbps SSD
i
Version 2
INTRODUCTION
The Integral V Series SSD offers great performance,
reliability and value. It is ideal for use in desktops
and laptops where you are looking to boost the
speed of an older computer by replacing the hard
drive with a Solid State Drive. The V Series will
deliver faster data read/write speeds along with
low power operation – extending the battery life
of your laptop.
PRODUCT OVERVIEW
Choose the V Series SSD to boost the performance of
your existing hardware and extend its useful life. It
will speed up your daily OS boot times and increase
the speed of your applications, overall giving you the
best experience of Solid State performance computing.
BENEFITS
• Enhanced performance: faster boot than HDD, faster
access to applications, enhanced productivity and
increased efficiency
• Read up to 520MB/s*, Write up to 470MB/s*
- No mechanical parts
- Highest reliability; less likely to fail than HDD
- Extreme shock resistance
- Zero noise
- No heat generation
• Low power consumption - improved battery life on
laptops/netbooks
120
GB
240
GB
480
GB
FEATURES
• 2.5 inch form factor with SATA III 6Gbps interface
(backwards compatible with SATA 3Gbps and SATA
1.5Gbps)
• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased
efficiency
• Fully compatible with devices and OS that support the
SATA standard
• Non-volatile Flash Memory for outstanding data retention
• Shock resistance – no moving parts enable the product to
be used in tougher conditions
• Silent operation - Noiseless
• Ultra-efficient Block Management and Wear Levelling
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and
Reporting Technology
• CE, FCC and RoHS compliant
• 3 Year Warranty
*480GB model performance, version 2.
Rev:5 10 2018
i
Product Specification
i
CAPACITIES & INTERFACE
Capacities available 120GB, 240GB
Form Factor 2.5 Inch
NAND TLC
Controller Technology Marvell 1120
Interface
Sequential Speed (up to)
SATA III 6Gbps
Also Compatible with SATA II 3Gbps
Also compatible with SATA III 1.5Gbps
120GB = READ 460MB/s, WRITE 300MB/s
1
240GB = READ 450MB/s, WRITE 400MB/s
480GB = READ 520MB/s, WRITE 470MB/s
DIMENSIONS
Length mm 100.18
Width mm 69.85
Height mm 7.0
Weight (Max) 45g
E-tail Packaged Weight 64g
E-tail Packaged
Dimensions (mm)
Retail Packaged Weight 86g
Retail Packaged
Dimensions (mm)
L = 133, W = 117, D = 13
L = 136, W = 111, D = 15
E-tail packaging order codes
CAPACITY PART CODE BARCODE (EAN)
120GB INSSD120GS625V2 5055288435926
240GB INSSD240GS625V2 5055288435933
480GB INSSD480GS625V2 5055288441415
Retail packaging order codes
CAPACITY PART CODE BARCODE (EAN)
120GB INSSD120GS625V2R 5055288436466
240GB INSSD240GS625V2R 5055288436473
480GB INSSD480GS625V2R 5055288441835
1. Performance based on “out of the box” internal testing measured under ambient temperature.
Sequential R/W is measured using ATTO.
2. Power Consumption may differ according to flash configuration and platform.
3. Humidity test was for 4 hours
4. TBW is a measurement of SSDs expected lifespan, which represents the amount of data written to
the device. This is only an estimate and can differ based in user usage behavior and platform. (TBW) is
derived from the JEDEC Client Workload (JESD219A).
E&OE. Product design and specification subject to change or modification without notice.
7mm to 9mm Adapter supplied with packaged product
POWER CONSUMPTION
Power Management
Power Consumption
2
(mW)
5V
120GB - Read 1010, Write 1055, Idle 360
240GB – Read 1227, Write 1584, Idle 400
480GB – Read 1650, Write 1800, Idle 475
ENVIRONMENTAL
Operating Temp 0° - +70°C
Storage Temp -40° - +85°C
Humidity
Vibration 7~800Hz, 3.08Grms, 30min/axis(X,Y,Z)
Shock 1500g, DURATION 0.5MS, Half Sine Wave
3
5% to 95%, non-condensing
FEATURES
Supports SMART Software Yes
Supports TRIM Yes (OS support required)
4
TBW
MTBF 1.5 Million Hours
Compliancy CE, FCC, RoHS
120GB = >40
240GB = >80
480GB = >160
WARRANTY
3 years
Rev:5 10 2018
Loading...