Integral INSSD120GS625V User Manual
i
Product Specification
Integral V Series 2.5’’ SATA III 6Gbps SSD
i
INTRODUCTION
The Integral V Series SSD offers great performance,
reliability and value. It is ideal for use in desktops
and laptops where you are looking to boost the
speed of an older computer by replacing the hard
drive with a Solid State Drive. The V Series will
deliver faster data read/write speeds along with
low power operation – extending the battery life
of your laptop.
PRODUCT OVERVIEW
Choose the V Series SSD to boost the performance of
your existing hardware and extend its useful life. It
will speed up your daily OS boot times and increase
the speed of your applications, overall giving you the
best experience of Solid State performance computing.
BENEFITS
• Enhanced performance: faster boot than HDD, faster
access to applications, enhanced productivity and
increased efficiency
• Read up to 540MB/s*, Write up to 400MB/s*
- No mechanical parts
- Highest reliability; less likely to fail than HDD
- Extreme shock resistance
- Zero noise
- No heat generation
• Low power consumption - improved battery life on
laptops/netbooks
120
GB
240
GB
FEATURES
• 2.5 inch form factor with SATA III 6Gbps interface
(backwards compatible with SATA 3Gbps and SATA
1.5Gbps)
• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased
efficiency
• Fully compatible with devices and OS that support the
SATA standard
• Non-volatile Flash Memory for outstanding data retention
• Shock resistance – no moving parts enable the product to
be used in tougher conditions
• Silent operation - Noiseless
• Ultra-efficient Block Management and Wear Levelling
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and
Reporting Technology
• CE, FCC and RoHS compliant
• 3 Year Warranty
*240GB model performance
Rev:3
i
Product Specification
i
CAPACITIES & INTERFACE
Capacities available 120GB, 240GB
Form Factor 2.5 Inch
NAND TLC
Controller Technology Marvell 1120
Interface
Sequential Speed (up to)
SATA III 6Gbps
Also Compatible with SATA II 3Gbps
Also compatible with SATA III 1.5Gbps
120GB = READ 540MB/s, WRITE 370MB/s
1
240GB = READ 540MB/s, WRITE 400MB/s
DIMENSIONS
Length mm 100.18
Width mm 69.85
Height mm 7.0
Weight 40g
Packaged Weight 58g
Packaged Dimensions
(mm)
L = 133, W = 107, D = 13
POWER CONSUMPTION
Power Management
Power Consumption
2
(mW)
5V
120GB - Read 1230, Write 1450, Idle 360
240GB – Read 1477, Write 1527, Idle 370
ENVIRONMENTAL
Operating Temp 0° - +70°C
Storage Temp -40° - +85°C
Humidity
Vibration 7~800Hz, 3.08Grms, 30min/axis(X,Y,Z)
Shock 1500g, DURATION 0.5MS, Half Sine Wave
3
5% to 95%, non-condensing
FEATURES
Supports SMART Software Yes
Supports TRIM Yes (OS support required)
4
TBW
MTBF 1.5 Million Hours
Compliancy CE, FCC, RoHS
120GB = >70
240GB = >140
WARRANTY
3 years
E-tail packaging order codes
CAPACITY PART CODE BARCODE (EAN)
120GB INSSD120GS625V 5055288435070
240GB INSSD240GS625V 5055288435087
Retail packaging order codes
CAPACITY PART CODE BARCODE (EAN)
120GB INSSD120GS625VR 5055288435704
240GB INSSD240GS265VR 5055288435711
1. Performance based on “out of the box” internal testing measured under ambient temperature.
Sequential R/W is measured using ATTO.
2. Power Consumption may differ according to flash configuration and platform.
3. Humidity test was for 4 hours
4. TBW is a measurement of SSDs expected lifespan, which represents the amount of data written to
the device. This is only an estimate and can differ based in user usage behavior and platform. (TBW) is
derived from the JEDEC Client Workload (JESD219A).
E&OE. Product design and specification subject to change or modification without notice.
7mm to 9mm Adapter supplied with packaged product
Rev:3
Loading...