Integral INSSD120GS625P5 User Manual
i
Product Specification
P Series 5 SATA III 6Gb/s 2.5” SSD
i
INTRODUCTION
The Integral P Series 5 SSD offers exceptional
performance levels and great value. It is ideal for
use in desktops and laptop computers.
The Performance Series SSD has a great combination
of fast data read/write and reliability, along with
low power operation - to make this the ideal hard
disk drive replacement.
Choose the P Series 5 SSD to boost the performance of
your existing hardware and extend its useful life.
It will speed up your daily OS boot times and increase
the speed of your applications, overall giving you the
best experience of Solid State performance computing.
KEY BENEFITS
• Providing an industry-leading bandwidth of more
than 560MB/sec transfers, the Integral P Series 5 SSD can
approach the limits of the SATA III 6Gb/s interface on
large transfers.
• Efficient bad block management and advanced wear
levelling algorithm further increases endurance and
life expectancy. Drive health is monitored using an SSDspecific set of S.M.A.R.T. attributes. The combination of
these techniques provides excellent data protection.
BENEFITS
• Enhanced performance: faster boot than HDD, faster
access to applications, enhanced productivity and increased
efficiency
• Sequential Read up to 560MB/s
1
, Write up to 540MB/s
1
READ 560MB/s
WRITE 540MB/s
120
GB
• No mechanical parts
- Highest reliability; less likely to fail than HDD
- Extreme shock resistance
- Zero noise
- No heat generation
• Low power consumption - improved battery life on
laptops/netbooks
240
GB
480
GB
1
1
960
GB
FEATURES
• 2.5 inch form factor with SATA III 6Gbps interface
(backwards compatible with SATA 3Gbps and SATA 1.5Gbps)
• Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased
efficiency
• Fully compatible with devices and OS that support the
SATA standard
• Non-volatile Flash Memory for outstanding data
retention - Less likely to fail than HDD
• Ultra-efficient Block Management and Wear Leveling
• Error Correction Code
• Lower Power Consumption
• Shock resistance - No moving parts enable the product to
be used in tougher conditions
• Silent operation - Noiseless and low heat dissipation
• Supports S.M.A.R.T. - Self-Monitoring, Analysis and
Reporting Technology
• RoHS compliant
• CE and FCC tested
• 3 Year Warranty
Rev:5
i
Product Specification
i
CAPACITIES & INTERFACE
Capacities available 120GB, 240GB, 480GB, 960GB
Form Factor 2.5 Inch
NAND 3D TLC
Controller Phison S11
Interface
Sequential Speed (up to)
SATA III 6Gbps
Also Compatible with SATA II 3Gbps
Also compatible with SATA 1.5Gbps
1
READ 560MB/s, WRITE 540MB/s
DIMENSIONS
Length mm 100.00
Width mm 69.85
Height mm 7.0
Weight 50g
E-tail Packaged Weight 64g
E-tail Packaged
Dimensions (mm)
Retail Packaged Weight 86g
Retail Packaged
Dimensions (mm)
L = 133, W = 117, D = 13
L = 136, W = 111, D = 15
POWER CONSUMPTION
Power Management
Power Consumption (mW)
5V
120GB - Read 1,265, Write 1,705, Idle 320
240GB - Read 1,280, Write 2,680, Idle 315
4
480GB - Read 1,270, Write 2,570, Idle 315
960GB - Read 1,620, Write 1,750, Idle 340
ENVIRONMENTAL
Operating Temp
Storage Temp -40° - +85°C
Humidity
2
5
0° - +70°C
RH 90% under 40°C (operational)
FEATURES
Supports SMART Software Yes
Supports TRIM Yes (OS support required)
ECC scheme LDPC
3
MTBF
Compliancy CE, FCC, RoHS
>2 Million Hours
WARRANTY
3 years
7mm to 9mm Adapter supplied with packaged product
Bottom View
Side View
E-tail packaging order codes
CAPACITY PART CODE BARCODE (EAN)
120GB INSSD120GS625P5 5055288436626
240GB INSSD240GS625P5 5055288436633
480GB INSSD480GS625P5 5055288439801
960GB INSSD960GS625P5 5055288439924
Retail packaging order codes
CAPACITY PART CODE BARCODE (EAN)
120GB INSSD120GS625P5R 5055288440081
240GB INSSD240GS625P5R 5055288440098
480GB INSSD480GS625P5R 5055288440104
960GB INSSD960GS625P5R 5055288440111
Rev:5
Notes:
1. Actual performance may vary and depends on use conditions, host and environment
2. Operating temperature is the drive case temperature as measured by the SMART temperature attribute
3. Mean Time Between Failures is estimated based on JEDEC-218/219 standard methodology.
4. Power Consumption may differ according to flash configuration and platform
5. Humidity test was for 4 hours.
All Specifications are subject to change without notice
1GB = 1,000,000,000 Bytes, 1TB = 1,000,000,000,000 Bytes; 1 sector = 512 Bytes.
The total usable capacity of the SSD may be less than the total physical capacity because a small portion of
the capacity is used for NAND flash management and maintenance purposes.
Loading...