Intech Instruments Ltd ZA-OD24-8, ZA-OD24-5, ZA-OD24-2, ZA-MD24-12, ZA-PG24-19 Installation Manual

...
Intech Wireless Antennas
for MicroScan Data and Discrete
Analogue Connections
RoHS
Compliant
Installation Guide.
2
Wireless Antennas Installation Guide Index.
Description. Page 3 Features. Page 3
2.4GHz 5.5dBi Rubber Duck Indoor Antenna. Page 3
2.4GHz 2.2dBi Omni Directional Whip Antenna. Page 4
2.4GHz 8dBi Omni Directional Monopole Antenna. Page 4
2.4GHz 12dBi Mini Directional Antenna. Page 5
2.4GHz 19dBi Directional Parabolic Grid Antenna. Page 5 Placement Considerations. Page 6
Environment. Page 6 Visual vs. RF Line-of-Sight. Page 6 Visual LOS. Page 6 RF LOS. Page 6
Antenna Gain Versus Beam Widths. Page 6 Getting the most out of your Wireless Network. Page 7 Attenuation. Page 7 Antenna Polarisation. Page 7 Good Signal Can't be Guaranteed. Page 7 Important. Page 7
Intech Wireless Nodes, Bracket Kit and Enclosure. Page 8
Ordering Information. Page 3
Fresnel Zone. Page 6
10 Metre Coax Option. Page 3
Product Liability. This information describes our products. It does not constitute guaranteed properties and is not in tended to affirm t he suitability of a product for a particular application. Due to ongoing research and development, designs, specifications, and documentation are subject to change without notification. Regrettably, omissions and exceptions cannot be completely ruled out. No liability will be accepted for errors, omissions or amendments to this specification. Technical data are always specified by their average values and are based on Standard Calibration Units at 25C, unless otherwise specified. Each product is subject to the ‘Conditions of Sale’.
Warning: These products are not designed for use in, and should not be used for patient connected applications. In any critical installation an independent fail-safe back-up system must always be implemented.
3
Description.
The Intech wireless antennas are intended to be used in conjunction with the 2.4GHz Z-2400 Zigbee® Wireless Nodes. Intech provides a range of antennas to cover applications where the range of the radio signal requires extra gain.
Features.
 Indoor and outdoor Antenna types.  Directional and Omni Directional Antennas.  Supplied as a Complete Kit.  Easy to Install.
Ordering Information.
Z-2400-A2 Antennas:
ZA-OD24-5 - 2.4GHz 5.5dBi Rubber Duck Indoor Antenna. ZA-OD24-2 - 2.4GHz 2.2dBi Omni Directional Whip Antenna. ZA-OD24-8 - 2.4GHz 8.0dBi Omni Directional Monopole. ZA-MD24-12 - 2.4GHz 12dBi Mini Directional Antenna. ZA-PG24-19 - 2.4GHz 19dBi Directional Parabolic Grid.
Z-2400 MicroScan Antennas:
ZB-OD24-5 - 2.4GHz 5.5dBi Rubber Duck Indoor Antenna. ZB-OD24-2 - 2.4GHz 2.2dBi Omni Directional Whip Antenna. ZB-OD24-8 - 2.4GHz 8.0dBi Omni Directional Monopole.
ZB-MD24-12 - 2.4GHz 12dBi Mini Directional Antenna.
ZB-PG24-19 - 2.4GHz 19dBi Directional Parabolic Grid.
Intech Wireless Antennas
2.4GHz Wireless Frequency Indoor & Outdoor Antennas
Specifications:
Frequency Range 2400~2500MHz. Gain 5.5dBi. Vertical Beam Width
120.
Horizontal Beam Width
360. Polarisation Vertical. VSWR <2.0. Impedance 50. Connector Type RP-SMA
(SMA Adapter Included for ZB-OD24-5).
Operating Temperature
-40~60C.
Dimensions H=208mm, MaxØ=13mm.
Compliance RoHS, CE.
2.4GHz 5.5dBi Rubber Duck Indoor Antenna.
The 5.5dBi Rubber Duck antenna has been added to the Intech wireless antenna range as a simple upgrade option, which attaches directly onto the Z-2400 unit. The Antenna features a tilt-and-swivel RP-SMA connector, allowing the antenna to be set at any angle. For indoor use only.
Z-2400-A2 Series Models:
 Z-2400-A2O  Z-2400-A2I  Z-2400-A2R
Z-2400 MicroScan Series Models:
 Z-2400-TCP-T  Z-2400-RB-T  Z-2400-SLEEPER
10 Metre Coax Option.
The antenna kits come supplied with a standard length of coax according to their model. If more length is required, the kit can be fitted with a larger 10 metre length of coax plus a short coax adapter.
Supplied with:
 ZA-COAX-10: 10m Coax N-Male to N-Male,
0.5m Coax N-Female Bulkhead to RP-SMA Male.
 ZB-COAX-10: 10m Coax N-Male to N-Male,
0.3m Coax N-Female Bulkhead to SMA Male.
Loading...
+ 5 hidden pages