Instrumentation - Monitoring - Control - www.intech.co.nz/sms/
GSM Controller
Monitoring & Control
from your Cell Phone
- Analogue &
Digital inputs
- Relay outputs
- Cool stores
- Pumping station
- Water supply system
- Agriculture
SMS Message
(GSM Mobile Phone)
SMS (Text) Messages
- Alarms
- Requests
- Control
GSM Remote Monitor /
Control / Alarm System
Main Features:
- Control / Monitor / Alarm via
GSMmobile phone.
- 8 Channel of 4~20mA inputs.
- 8 relay outputs.
- 8 switch inputs.
- Use Short Message commands
from your mobile to enable or
disable analog input alarm,
switch input alarm and set relay
output on/off.
- Two defaulted phone numbers
available.
- Dual-band GSM modem
built in.
Use Short Message Commands from your Mobile to Control Systems
4
Industrial remote monitor / control / alarm system
Industrial security system
Home security system
Building supervision
Industrial system
Pumping station
Power station
Agriculture usage
Animal husbandry
Water supply system
Traffic system
Railway systems/Vehicle
Energy system
Water clarification
Heating power plant
Control/Monitor/Alarm via GSM mobile phone, no
distance limitation. User can control/monitor/alarm their
devices all over the world.
8 channels Analog input (4 -20 mA).
8 Relay outputs.
8 Switch inputs, normal open, close alarm.
8 Analog inputs: system can preset 4 mA and 20 mA
input value according the real measuring value and
setting display unit. It can read actual measuring data
via the SMS ( Short Message ) requested, such as
CH1= 28.0 C. CH2=53.7 %RH, CH3=7.01 pH........
CH8= 230.5 ACV.
Enable or disable Analog input alarm ( High alarm, Low
alarm ) via SMS.
Enable or disable switch Input alarm ( close alarm ) via
SMS.
Set relay output On/Off via SMS.
Dot matrix LCD display show Analog input value, Switch
input and Relay output status.
All setting value will be saved into EPROM IC, no loss.
Mobile telephone can call out all channel measuring
value, status of Switch input and Relay output at any
time.
Can default two telephone no., alarm SMS can be sent
to two users.
Build GSM mobile modem ( dual band ).
After the SMS command sent by mobile phone, the
confirm message will be sent back to the mobile, safe
and no loss.
Intelligent application , innovation, wide range, no
limitation.
Features
Applications
Front Panel & Layout Description
OP (Relay Output, 1Amp Rating)
4-20 Fix hole for wall installation
4-21 Fix hole for wall installation
4-22 Screws for the SIM card cover
4-23 SIM card holder
4-24 Terminal instruction label
4-17 IP ( Switch input ) terminals
4-18 CH ( Analog input, 4-20 mA input ) terminals
4-19 OP ( Relay output ) terminals
4-1 DC 9V power adapter socket
4-2 Antenna and Antenna socket
4-3 Power On/Off switch
4-4 GSM indicator
4-5 LCD display
4-6 System indicator
4-7 Relay output indicator
4-8 Switch input indicator
4-9 Numerical buttons
4-10 Decimal button
4-11 + - button
4-12 button
4-13 button
4-14 SETUP button
4-15 ENTER button
4-16 RESET button
OP (Relay Out put, 1A m p Rati ng)
Specifications
DISPLAY Dot-matrix LCD with backlight
16 charactersx 2 lines
GSM Modem 900/1800 MHz,dual bands
Switch inputs Number 8 inputs
Reaction time 200 mS, min.
Status Default open,
Closed for alarm
Analog input Number 8 channels
4 to 20 mA Input 125 ohm
impedance
Resolution 12 bitsA/D converter
Setting 4 mA. 20 mA setting
by front Unit setting
buttons High/Low alarm value setting
Relay outputs Number 8 relays
Function Relay 1 to Relay 7 can
control by mobile via SMS.
Relay 8 is the alarm relay
used to connectto field
alarm system
Max load 1 ACA/250 ACV
1 DCA/24 DCV
Standard CE conformity
Operating 0 to 50 (32 to 122 )
Temperature
Operating Less than 80% RH
Humidity
Power supply DC9V
Power Lessthan 400 mA DC
consumption
Size 193 x 149 x46 mm.
( 7.6 x 4.9 x 1.8 inch ).
Weight 592 g ( 1.3 LB ).
Accessories Operation manual.......................1 PC
included AC ( 100 -240 V )/DC ( 9V, 1 Amp )
power adapter............................ 1 PC
Antenna .................................... 1 PC
Instrumentation - Monitoring - Control - www.intech.co.nz
Christchurch
Ph: 03 343 0646
Fx:03 343 0649
IN1046
For more information on this product, please visit: www.intech.co.nz/sms/
Auckland
Ph: 09 827 1930
Fx: 09 827 1931Fx: 06 876 0036
Central
Ph: 06 876 0034
Loading...