Page 1
User Manual
1. Power : Turn I- Drive On/OFF
2. Scan : Tunes in the desired FM Frequency
3. Memory : Set and Stores up to 9 Preset FM Frequencies
4. + or - : *Scan buttons to fine tune the frequency
*Press and hold the + or – scan buttons to increment
frequency at a faster frequencies
5. Memory :
*Use the + or - Scan Buttons to set a frequency you want to
save as a preset
*Press and hold the memory button for 3 sec to activate the
preset saving mode (flashing M)
*To cancel preset saving mode wait 10 seconds for flashing “M”
to disappear
*Use the + or – Scan Buttons to select a preset number 1
throught 9 to be assigned
*press the memory button one last time to save the preset
Caution:changes or modifications not expressly approved by the
party reponsible for compliance could void the user's authority
to operate the equipment
Loading...