Page 1
EloStar time
Handbuch
Version 1.03
1
EloStar time
User manual
EN 1300
M 102301
Class 2/B
Page 2
EloStar time
Handbuch
Version 1.03
2
Table of contents
1. OPENING THE LOCK .................................................................................................................................... 3
2. LOCKING THE LOCK ................................................................................................................................... 4
3. PROGRAMMING THE LOCK ...................................................................................................................... 5
3.1. R
EPROGRAMMING THE MASTER CODE
.......................................................................................................... 6
3.2. R
EPROGRAMMING THE MASTER CODE WITH EMERGENCY OPENING LOCK
.................................................... 6
3.3. P
ROGRAMMING USER CODES
........................................................................................................................ 7
3.4. 4-
EYES PRINCIPLE
......................................................................................................................................... 8
3.5. S
ETTING THE OPENING DELAY / RELEASE TIME
............................................................................................. 9
3.6. A
UTOMATIC LOCKING
................................................................................................................................ 10
3.7. B
LOCKING / RELEASING THE LOCK
............................................................................................................. 11
3.8. S
ETTING DATE AND TIME
............................................................................................................................ 12
3.9. P
ROGRAMMING WITH A
PC ........................................................................................................................ 13
3.10. E
VENT LOG
............................................................................................................................................... 15
3.11. R
EPROGRAMMING THE QUICK OPENING CODE
.......................................................................................... 15
3.12. A
CTIVATING EXTERNAL INPUT AND OUTPUT SIGNALS
.............................................................................. 16
3.13. C
ONNECTION OF THE EXTERNAL
LCDXT
DISPLAY
.................................................................................. 20
3.14. R
ESETTING THE LOCK
............................................................................................................................... 21
4. APPENDIX ...................................................................................................................................................... 22
4.1. O
PTICAL AND ACOUSTIC SIGNAL OUTPUTS
................................................................................................. 22
4.2. N
OTES
........................................................................................................................................................ 22
4.3. A
CCESSORY LIST
........................................................................................................................................ 23
Page 3
EloStar time
Handbuch
Version 1.03
3
EloStar time
Safety notes
• Immediately change the factory-set master CODE 1 2 3 4 5 6 for security reasons.
• Do not use any personal data for your new CODE such as birthdays or other information that
could be guessed from knowledge about you.
•
After entering your new CODE, open and close the electronic lock several times with your PIN
and new CODE while the door is open.
•
You can always cancel an entry that you have started with the
C
key.
1. Opening the lock
Opening with a code
0
Enter your user number (0 = master code)
123456
1
Enter the opening code
If a power interruption has occurred, e.g. battery change, the code has to be
entered twice.
If a signal sequence sounds after you have entered your user number, the lock is
blocked for access:
A time program is active
Lock blocked by master
Lock blocked by a connected burglar alarm system, for example
When the lock is open, the green LED flashes every second (only when the function
“Automatic locking after 10 sec.” is activated). In this state, all functions of the lock
can be programmed. (See Programming the lock)
Page 4
EloStar time
Handbuch
Version 1.03
4
2. Locking the lock
Three options are provided for locking the lock:
Locking by pressing a key (default setting)
Locking via door switch/boltwork switch
Automatic locking after 10 seconds
The lock is locked by pressing a key (except for C and * key) as the default setting. In
order to activate one of the two other options, the lock has to be programmed
correspondingly. The programming can either be done via the keypad (see Chapter
3. Programming the lock) or via the PC software CombiComm (not included in the
scope of supply).
Attention:
Before leaving the safe deposit, it is imperative to make sure that the lock is correctly
locked.
Further functions of EloStar time:
1 master code (6-digit)
9 user codes
Silent alarm with alarm time delay
Automatic locking with door switch
Automatic locking after 10 seconds
4-eyes principle
Opening delay with release time
Blocking / releasing lock
Event log with the last 512 events
Date / time
User-defined time programs
Quick opening code
Programming via PC
Resetting the lock
Page 5
EloStar time
Handbuch
Version 1.03
5
3. Programming the lock
In order for the lock to be programmed, it has to be opened. For this purpose, the
lock can be opened with any user code.
In the delivery state, the lock can only be opened with the factory master code
(0 = user no. + 1 2 3 4 5 6 = master code,
0 123456
).
The most important functions of the lock can be programmed with the keypad;
extended functions are programmed with the PC software CombiComm and the
event log is read out with the PC software.
Programming with the keypad
Program number Function
0
Reprogram the master code
1
Program/reprogram/delete user codes
2
Activate the 4-eyes principle
3
Set the opening delay / release time
4
Set automatic locking after 10 sec.
5
Reset lock
6
Block / release lock
7
Start programming via PC
8
Set date and time
9
Set IO functions / set blocking element
Page 6
EloStar time
Handbuch
Version 1.03
6
3.1. Reprogramming the master code
Notes:
• Immediately change the factory-set code 1 2 3 4 5 6 for security reasons.
• The programming can only be done when the lock is open.
• Do not use any personal data for your new code such as birthdays or other
information that could be guessed from knowledge about you.
• After you have entered the new code, open and close the electronic lock
several times with the new code while the door is open.
*0*
Enter the program number
123456 * 1
Enter the old master code
654321 *
Enter the new master code
654321 * 1
Enter the new master code
3.2. Reprogramming the master code with emergency opening lock
In conjunction with an emergency opening lock, the master code can be
reprogrammed without knowledge of the current master code. The emergency
opening lock must be open for this.
*0*
Enter the program number
654321 *
Enter the new master code
654321 * 1
Enter the new master code
Page 7
EloStar time
Handbuch
Version 1.03
7
3.3. Programming user codes
Note:
• The programming can only be done when the lock is open.
• Do not use any personal data for your new code such as birthdays or other
information that could be guessed from knowledge about you.
• After you have entered the new code, open and close the electronic lock
several times with the new code while the door is open.
• The programming or deletion of user codes is saved in the event log. (For
reading out the event log, see the manual of the PC software CombiComm)
Programming or creating a new user code
*1*
Enter program number 1
1*
Enter the user number (e.g. user 1)
123456 * 1
Enter the master code
111111 *
Enter the new user code
111111 * 1
Enter the new user code
Reprogramming the user code
*1*
Enter program number 1
1*
Enter the user number (e.g. user 1)
111111 * 1
Enter the master code or old user code
132132 *
Enter the new user code
132132 * 1
Enter the new user code
Deleting a user code
*1*
Enter program number 1
1*
Enter the user number (e.g. user 1)
123456 * 1
Enter the master code
*
1
Delete
Note:
When the 4-eyes principle is activated, it is not possible to delete all users;
at least one user must be programmed.
Page 8
EloStar time
Handbuch
Version 1.03
8
3.4. 4-eyes principle
Notes:
• The 4-eyes principle can only be set with the master code.
• This setting can only be made when the lock is open. After this function has
been programmed (activated), the lock can only be opened when two codes
are entered.
• The programming or deletion of the 4-eyes principle is saved in the event log.
(For reading out the event log, see the manual of the PC software
CombiComm)
• In addition to the master code, at least one user code must be programmed.
Activating the 4-eyes principle
*2*
Enter program number 2
123456 *
Enter the master code
1*
1
Activate the 4-eyes principle
Deleting the 4-eyes principle
*2*
Enter program number 2
123456 *
Enter the master code
0*
1
Delete the 4-eyes principle
Opening with the 4-eyes principle
1 010101 1
Enter the user number of the first code (e.g. 1) and
enter the first code (e.g. 010101)
1
Green LED is lit.
2 020202 1
Enter the user number of the second code (e.g. 2) and
enter the second code (e.g. 020202)
Page 9
EloStar time
Handbuch
Version 1.03
9
3.5. Setting the opening delay / release time
Notes:
• The opening delay can only be programmed by the master.
• The programming can only be done when the lock is open.
• The programming or deletion of the opening delay and release time is saved in
the event log. (For reading out the event log, see the manual of the PC
software CombiComm)
Setting the opening delay and release time
*3*
Enter the program number
123456 *
1
Enter the master code
01*
Set an opening delay, e.g. 01 min.
01*
1
Set a release time, e.g. 01 min.
The opening delay can be set in the range of 01 – 99 minutes.
The release time can be set in the range of 01 – 15 minutes. When 00 is entered, the
lock immediately opens after the opening delay has expired, without an additional
code entry or expiration of a release time.
Deleting the opening delay and release time
*3*
Enter the program number
123456 *
1 Enter the master code
00*
Delete the opening delay
00*
1
Delete the release time
Opening with opening delay and release time
1 010101
1 Enter the user number of the first code (e.g. 1) and
enter the first code (e.g. 010101)
(in the case of the 4-eyes principle, enter the second code
as well).
1
Expiration of the opening delay. The green LED flashes
every 5 seconds. After the time delay has expired, this is
signaled by the signal tone 15x. The green LED is lit. The
lock waits for the opening code to be entered again during
the release time.
1 010101 1
Enter the user number of the code (e.g. 1) and
enter the first code (e.g. 010101).
Lock opens. (Only one code is required, even with
the 4-eyes principle!)
Page 10
EloStar time
Handbuch
Version 1.03
10
3.6. Automatic locking
Notes:
• Automatic locking can only be set by the master.
• After this function has been activated, the lock automatically locks 10 seconds
after it was opened.
• The programming can only be done when the lock is open.
• The programming or deletion of the opening delay and release time is saved in
the event log. (For reading out the event log, see the manual of the PC
software CombiComm)
Activating automatic locking
*4*
Enter the program number
123456 *
1
Enter the master code
1*
1
Activate automatic locking
Deleting automatic locking
*4*
Enter the program number
123456 *
1
Enter the master code
0*
1
Delete automatic locking
Page 11
EloStar time
Handbuch
Version 1.03
11
3.7. Blocking / releasing the lock
Notes:
• The lock can only be blocked by the master.
• The programming is done when the lock is closed!
• After the blocking has been activated, the lock is blocked for user codes until
the master removes the blocking.
• The programming is saved in the event log. (For reading out the event log, see
the manual of the PC software CombiComm)
Blocking the lock
*6*
Enter the program number
123456 *
1 Enter the master code
1*
1
Activate the blocking
Releasing the lock
*6*
Enter the program number
123456 *
1
Enter the master code
0*
1
Cancel blocking
Page 12
EloStar time
Handbuch
Version 1.03
12
3.8. Setting date and time
Notes:
• The programming is only done by the master.
• Date and time are entered without points.
• A corresponding number must be entered for the day of the week.
• 1 = Monday / 2 = Tuesday / 3 = Wednesday / 4 = Thursday / 5 = Friday / 6 =
Saturday / 7 = Sunday
• The correct setting of the time, date and day of the week is essential for the
correct operation of the time programs, the automatic summer/winter time
changeover and the event log.
• The setting can be made when the lock is open as well as closed.
*8*
Enter the program number
123456 *
1
Enter the master code
150507 *
Enter the date, e.g. 15.05.09
1500
* Enter the time, e.g. 15:00
3*
1
Enter the day of the week, e.g. 3 = Wednesday
Page 13
EloStar time
Handbuch
Version 1.03
13
3.9. Programming with a PC
Programming with a PC is done using the CombiComm parameterization set.
More detailed information can be found in the manual of the CombiComm PC
software.
Programming with a PC can only be done when the electronic lock is open!
Note:
Before the connection is established, the CombiComm PC software must be
started and the correct communication interface must be selected.
The following settings, among others, can be made with a PC:
• User-defined time programs
• 4-eyes principle
• IO functions
• Silent alarm incl. alarm delay
• Quick opening code
• Opening delay / release time
• Date / time
• Reading out the event log
Page 14
EloStar time
Handbuch
Version 1.03
14
Establishing a connection to the PC
Depending on the keypad design, the interface cable is correspondingly connected
on the inside or the outside of the cabinet.
Keypad 7236 Connection outside, below keypad cover
Keypad 7233 Connection inside the safe deposit or the
door
Keypad 7231 Connection inside the safe deposit or the
door
Starting communication with the PC
*7*
Enter program number 7
123456 * 1
Enter the master code
Page 15
EloStar time
Handbuch
Version 1.03
15
3.10. Event log
The last 512 events are logged in chronological order with the date and time. The
information is read out with the CombiComm parameterization set. More detailed
information on this can be found in the manual of the PC software.
The following events are logged:
Reset of the lock or battery change
Code entries
Lock open
Lock closed
Programming via serial interface
Programming or deletion of the 4-eyes principle
Reprogramming the master code
Programming, reprogramming or deletion of user codes
Programming or deletion of the opening delay and release time
Programming of the automatic locking
Lock blocking
Resetting the lock
Note:
The correct setting of the date and time is the basis for correct event logging!
The log data is read out via PC, as the programming is done!
(See Programming via PC !)
*7*
Enter program number 7
123456 * 1
Enter the master code
3.11. Reprogramming the quick opening code
• A programmed opening delay can be circumvented by the quick opening code.
• The quick opening code is assigned to user 9 at the factory.
• However, this code can be reprogrammed to any other user with the PC
software CombiComm.
Page 16
EloStar time
Handbuch
Version 1.03
16
3.12. Activating external input and output signals
3.12.1. General functionality
The following functions can be implemented using external signals, inputs and
outputs:
Silent alarm
Automatic locking with the door switch
Status display of the deadbolt of the lock
External blocking / release of the lock
Display of the end of the opening delay
The electronic lock EloStar time has 2 inputs and 2 outputs for implementing the
above-mentioned functions. A particular function can be assigned to each input
signal and output signal according to the following description of the function
numbers.
The extension unit EloXT and the adapter p.c.b. EloAdapt are available for
professionally connecting the signals of the lock.
EloXT EloAdapt
2 relay outputs 1 open collector output
2 switching inputs / 2 12V inputs 1 switching input
Power supply unit connection 12VDC Voltage connection 9VDC
RS-232 connection
More detailed information can be found in the installation instructions for EloXT and EloAdapt.
EloXT
1 2 4 5 6 7 8 9 10 11 123
Anschlussbelegung:
1 GND
2 12VDC
3 OUT1_Z
4 OUT1_O
5 OUT1_C
6 OUT2_Z
7 OUT2_O
8 OUT2_C
9 IN2_1
10 IN2_2
11 IN1_1
12 IN1_2
Schloss 7215
Tastatur
PC / Laptop
1
2
12VDC
Page 17
EloStar time
Handbuch
Version 1.03
17
Activation of IO functions
Notes:
After activation, the following inputs/outputs are queried or actuated.
Activation or deactivation can only be performed by the master.
The activation or deactivation is saved in the event log.
*9*
Enter program number 9
123456 *
1 Enter the master code
11*
1
Enter the function number (e.g. 11)
2nd digit => outputs
1st digit => inputs
Explanation of the function numbers:
Inputs:
1st digit
0
= No function
1
= Door switch (IN1)
2
= Door switch (IN1), release/blocking (IN2)
3
= Release/blocking (IN1)
Outputs:
2nd digit
0
= No function
1
= Deadbolt status (OUT1)
2
= Silent alarm (OUT1)
3
= Silent alarm (OUT1), deadbolt status (OUT2)
4
= Silent alarm (OUT1), end of opening delay (OUT2)
5
= Deadbolt state (OUT1), end of opening delay (OUT2)
Deleting I/O functions
*9*
Enter program number 9
123456 *
1
Enter the master code
00*
1
Delete = 00 *
Page 18
EloStar time
Handbuch
Version 1.03
18
3.12.2. Silent alarm and alarm time delay
Notes:
• The silent alarm function and the corresponding output signal are only active
when the function has been activated.
• The silent alarm is triggered by entering the opening code, whereby the last
digit has to be increased by one.
Example: 0 123456 Normal opening code
0 123457 Triggering of the silent alarm (9+1 -> 0)
• After a silent alarm has been triggered, a programmed alarm time delay
becomes active. The release time of the alarm time delay is permanently set
to 5 minutes.
• The alarm signal can either be signaled and connected via the EloXT
expansion unit (relay output) or via the adapter p.c.b. EloAdapt (open
collector output).
• The triggering of a silent alarm is also saved in the event log.
• The silent alarm and alarm time delay functions can also be programmed with
the PC software CombiComm.
Activation of the “silent alarm”
*9*
Enter program number 9
123456 *
1 Enter the master code
02*
Enter the user function number (e.g. 02)
01*
1
Enter the opening delay in the case of an alarm
in minutes, e.g. 01 minute.
Page 19
EloStar time
Handbuch
Version 1.03
19
3.12.3. Automatic locking with the door switch
Notes:
• With the function “Automatic locking via door switch”, the electronic lock can
be automatically locked by actuating a door or boltwork switch.
• If the door switch is not opened within 15 seconds after the code is entered
and the lock is opened, the electronic lock locks again automatically.
• The “Automatic locking” function can also be programmed with the PC
software CombiComm.
Activation of the function “Automatic locking via door switch”
*9*
Enter program number 9
123456 *
1 Enter the master code
10*
1
Enter the function number (e.g. 10)
Connect the door switch to IN1
3.12.4. External release / blocking
Notes:
• The electronic lock can be blocked or released by an external signal, e.g. by a
burglar alarm system, via this input contact. The lock can then no longer be
operated by a user.
• The function can either be programmed to IN1 or IN2, see function numbers.
Activation of the function “External blocking / release”
*9*
Enter program number 9
123456 *
1 Enter the master code
30*
1
Enter the function number (e.g. 30)
Connect the blocking signal to IN1
Page 20
EloStar time
Handbuch
Version 1.03
20
3.12.5. Signaling the status of the deadbolt of the lock
Notes:
• The electronic lock can signal the status of the deadbolt via this output
contact.
• The function can either be programmed to OUT1 or OUT2, see function
numbers.
Activation of the “Status indication” function:
*9*
Enter program number 9
123456 *
1 Enter the master code
01*
1
Enter the function number (e.g. 01)
Connect IN1
3.13. Connection of the external LCDXT display
For optical display of a programmed opening delay (count down =
“Zeitverzoegerung”), the mobile display LCDXT (optional accessory) can be
connected.
More detailed information can be found in the manual of the display.
Page 21
EloStar time
Handbuch
Version 1.03
21
3.14. Resetting the lock
Notes:
• The lock can only be reset by the master.
• Programming is done when the lock is open!
• All user codes and the configuration are deleted. The master code is
preserved.
• The programming is saved in the event log. (For reading out the event log, see
the manual of the PC software CombiComm)
Resetting the lock
*5*
Enter the program number
123456 *
1 Enter the master code
0*
1
Reset the lock
Page 22
EloStar time
Handbuch
Version 1.03
22
4. Appendix
4.1. Optical and acoustic signal outputs
Signal output Reason Note
1
green 1 x
Correct code entry
1
red and 12 x
Incorrect code entry
After 3 consecutive incorrect code
entries, a blocking time of 12 sec.
occurs. Each subsequent incorrect
entry extends the blocking time by
12 sec. Blocking time cannot be
cancelled!
1
green and 2 x
Change OK
Code changed or additional
functions switched on/off correctly.
1
red and 12 x
Change invalid
Code changed or additional
functions switched on/off incorrectly.
Repeat procedure.
1
green flashes every 5
sec.
Time delay is
running
While the time delay is running, the
electronic lock does not react to any
key entry.
15 x
then 1
green
Release is running
(time delay expired)
For release times, see
Opening with time delay.
1
red flashes every 5 sec.
Blocking time is
running.
Blocking time cannot be cancelled!
1
green and 2 x
Blocking time
expired.
Electronic lock can now be opened
with the correct code.
1
alternately flashes red
and green, 10 x and
10 x
Battery warning
ALKALINE type batteries (not
rechargeable) should be changed
soon.
Codes are preserved when
batteries are changed. Enter code
2x after battery change.
1
green and 1 x , then
1
red and 1 x
Keypad has been
manipulated or
changed.
In order to open the electronic lock,
the code has to be entered again.
4.2. Notes
Page 23
EloStar time
Handbuch
Version 1.03
23
We assume no liability for malfunctions caused by incorrect operation, the application
of force or improper handling or for property damage and financial losses caused by
improper locking of the safe.
If the electronic lock cannot be opened despite correct operation, please contact the
manufacturer of the safe.
Safety notes
• Immediately change the factory-set code 1 2 3 4 5 6 for security reasons.
• Do not use any personal data for your new code such as birthdays or other
information that could be guessed from knowledge about you.
• After you have entered the new code, open and close the electronic lock
several times with the new code while the door is open.
4.3. Accessory list
Accessory Order number Price
CombiComm parameterization set On request
EloXT expansion unit On request
EloAdapt adapter p.c.b. On request
Plug-in power supply unit 12VDC On request
Plug-in power supply unit 9VDC On request
USB serial converter On request
Page 24
EloStar time
Handbuch
Version 1.03
24
Revision history
Version Status Change Name
1.00 15.05.07 First edition MB
1.01 28.05.07 Adaptations, additions MB
1.02 11.06.07 Adaptations MB
1.03 26.11.07 Name changed again to EloStar time
Adaptation of IO functions
MB
!!! Errors excepted !!!
Support / hotline
Carl Wittkopp GmbH & Co. KG
Sternbergstr. 5
D – 42551 Velbert
Tel.: +49(0)2051 – 9566-0
Fax.: +49(0)2051 – 9566-66
www.cawi.com
INSYS Microelectronics GmbH
Waffnergasse 8
D – 93047 Regensburg
Tel.: +49(0)941 – 560061
Fax.: +49(0)941 – 563471
www.insys-tec.de
Loading...