InstruStar Electronic Technology http://www.instrustar.com/
ISDS2062A
ISDS2062B
1
ISDS2062A(B) User Guide
InstruStar Electronic Technology
2016-11-10
InstruStar Electronic Technology http://www.instrustar.com/
ISDS2062A
ISDS2062B
2
contents
1.Introduction
…………………………………………………………
1
2.Feature Description
…………………………………………………
1
3.Software Installation
…………………………………………………
2
4.Interface………………………………………………………………3
5.Oscilloscope/Spectrum analyzer/DDS
………………………………
4
InstruStar Electronic Technology http://www.instrustar.com/
ISDS2062A
ISDS2062B
3
PC SYSTEM REQUIREMENTS
Windows XP
，Win7，Win8，Win10
Pentium or higer processor
USB2.0 High speed port.
512MB RAM
1GB hard disk space
InstruStar Electronic Technology http://www.instrustar.com/
ISDS2062A
ISDS2062B
1
1.Introduction
ISDS2062A/ISDS2062B dual-channel digital oscilloscope, with "low-cost,
high-performance" as the design goals. well-designed bandwidth of 12Bit, 20M, 60M
sampling rate, 2 channels, alternating support X-T and X-Y alternating pattern of
two-channel virtual oscilloscope, spectrum analyzer. Meanwhile, ISDS2062B has
DDS function. DDS support 5 kinds of waveform output, Sine wave can output up to
20M. The device communicate with the PC via high speed USB2.0.
2.Feature Description
Digital oscilloscope
Channels
2
Impedance
1MΩ 25pF
Coupling
AC/DC
Vertical resolution
12Bit
Gain range
-32V ~ 32V（probe X1）
-320V ~ 320V（probe X10）
Vertical accuracy
±3%
Timebase range
10ns/div-10s/div
Input Protection
Diode，50Vpk
Autoset
Yes(10Hz to 20MHz)
Trigger Mode
Auto、Normal and Signal
Trigger Type
No、Edge、Pulse
Trigger level
Yes
Trigger Source
CH1, CH2
Trigger Sense
0.1div-1.0div
Buffer Size
256KB/CH
Bandwidth
20MHz
Max sample
60MS/s
Vertical mode
CH1, CH2, ADD, SUB, MUL
Display Mode
X-T 和 X-Y
measurements
Yes
Wave save
Osc(Private)、Excel and Bmp
Digital oscilloscop
Spectrum analyzers
DDS
Sweeper
ISDS2062A√√
ISDS2062B√√
√
√
InstruStar Electronic Technology http://www.instrustar.com/
ISDS2062A
ISDS2062B
2
Spectrum analyzers
Channels
2
Bandwidth
20MHz
Algorithm
FFT(18 windows)、Correlation
FFT points
8-1048576/CHN
FFT measure
Harmonic(1-7)、SNR、SINAD、ENOB、THD、SFDR
Filter processing
FIR filter supports arbitrary range of frequency
sampling method , and Rectangle, bartlett, triangular,
cosine, hanning, bartlett_hanning, hamming, blackman,
blackman_Harris, tukey, Nuttall, FlatTop, Bohman,
Parzen, Lanczos, kaiser, gaussand dolph_chebyshev,
window method design.
IIR filter support "Butterworth", "Chebyshev I",
"Chebyshev II", "Elliptic" type of filter design
DDS(Only ISDS220B)
Wave
Sine, Square(Duty circle variable),Triangle,Up
Sawtooth,Down Sawtooth
Amplitude
≥9Vp-p(no load)
Impedance
200Ω±10%
Offset
±2.5V
Frequency range
0.1Hz ~ 20MHz(Sine), 0.1Hz ~ 2MHz(Others)
Frequency resolution
0.1Hz
Frequency steadiness
±1×10
-3
Frequency precision
±5×10
-3
Triangular wave linearity
≥98% (1Hz~10kHz)
Sine wave distortion
≤0.8% (1kHz)
Square wave rising/falling time
≤100ns
Square wave duty circle
1%~99%
SWEEP
Sweep range
Fs 到 Fe
Sweep time range
0.1 ~10 s
Amplitude
0.5Vp-p ~ 10Vp-p
Sweeper(Only ISDS2062B)
Sweep Range
1Hz~5MHz
Sweep Type
Gain, Phase
Note: The oscilloscope factory calibration, if you are not satisfied with the
measurements, canmanual calibration, the specific reference oscilloscope
InstruStar Electronic Technology http://www.instrustar.com/
ISDS2062A
ISDS2062B
3
instructions.
3.Software Installation
Please refer to the "Software and Driver Installation.pdf".
4.Interface
4.1 ISDS2062A
4.2 ISDS2062B
5.Oscilloscope/Spectrum analyzer/DDS
Please refer to the "Multi VirAnalyzer User Guide.pdf", "Digital storage oscilloscope
(Professional Version).pdf" and "Digital storage oscilloscope (Simplified Version).pdf".
Loading...