Instrument Transformer, Div of GE PCL 0-600 Data Sheet

GE

For load currents which are greater than 600 A the

Grid Solutions

Model PCL 0-600

AC Current Transducer
0-600 Amps ac to produce 4-20 mA dc

Operating Range

Input 0 to 100 thru 600 Amps ac.
Output: 4-20 mA dc.

Frequency

50-400 Hz.

Accuracy

±0.05 % F.S. maximum.

1 % max. peak ripple on output.

Response Time: <150 ms (10 % to 90 %)

Output load (RL): 0-1,000 .

Ambient Temperature Range

Effect on accuracy ±0.02 %/ oC
Operating: -30
Storage: -55

oC to +60 oC

oC to +85 oC

Insulation level

600 Volts, 10 kV BIL full wave

The PCL transducers accurately converts a sinusoidal ac input current to a proportional dc output current. The high performance
integrated circuit amplifiers achieve a content current output, insensitive to a variable impedance load. This allows the PCL to be easily
applied to remote instrumentation, motor control and energy management installations. The output signal (4 to 20mA dc) can be
transmitted over long distances with no loss accuracy

Maximum output: 30 mA dc.

Supply Voltage Range: 120 Vac ±10 %.

Terminal are brass studs No. 8-32
with one flatwasher, lockwasher
and regular nut.

Approximate weight 3.0 lbs.

REGULATORY AGENCY APPROVALS

317008

CANADIANC

CANADIANC

C

CC

C 317008

CC

PCL-5 may be used in conjunction with separate
higher ratio C.T.’s having a rated 5A secondary.

Model PCL 0-600 - Typical Connection Diagram

Do not apply around or remove
from Hazardous LIVE conductors.

Cleaning:

Remove dust with a damp cloth. Do not spray with any chemicals.

Caution:

Proper safety precautions must be followed during installation
by a trained electrician. Never install or remove while bus is
energized. Protective equipment must be used if hazardous parts
in the installation where measurement is tobe carried out could
be accessible.

Grid-AIS-L4-ITI_Model_PCL_0_600-1125-2017_07-EN. © Copyright 2017. General Electric Company
and Instrument Transformers LLC reserve the right to change specifications of described products at
any time without notice and without obligation to notify any person of such changes.