
GE
The PCL transducer accurately converts a sinusoidal ac input current to a proportional dc output current. The high performance integrated
Grid Solutions
Model PCL
AC Current Transducer
0-75 Amps ac to produce 4-20 mA dc
Operating Range
Input 5 thru 75 Amps ac
Output: 4-20 mA dc.
Frequency
50-60 Hz.
Ambient Temperature Range
Effect on accuracy + 0.02%/ oC
Operating: -30
Storage: -55
oC to +60 oC
oC to +85 oC
Accuracy
+ 0.5% F.S. maximum.
1% max. peak ripple on output.
Response Time: <150 ms (10 % to 90 %)
Output load (RL): 0-1000 .
Maximum output: 30 mA dc.
Supply Voltage Range: 120 Vac + 10 %.
Terminal are brass studs No. 10-32
with one flatwasher, lockwasher and
regular nut.
Approximate weight: 1.0 lbs.
Insulation Level
600 Volts, 10 kV BIL full wave
circuit amplifiers achieve a constant current output, insensitive to a variable impedance load. This allows the PCL to be easily applied to
remote instrumentation, motor control and energy management installations. The output signal (4 to 20 mA dc) can be transmitted over
long distances with no loss in accuracy. Model numbers PCL 20 and PCL 75 have been provided with a range selector switch for customer
selectable current ranges. The input circuit is average responding. The output is calibrated to read true RMS for a pure sinus waveform.
REGULATORY AGENCY APPROVALS
317008
CANADIANC
C
CC
317008
* Switch selectable current ranges.

Model PCL - Typical Connection Diagram
Do not apply around or remove from Hazardous LIVE conductors.
Cleaning
Remove dust with a damp cloth. Do not spray with any chemicals.
Caution
Proper safety precautions must be followed during installation
by a trained electrician. Never install or remove while bus is
energized. Protective equipment must be used if hazardous parts
in the installation where measurement is tobe carried out could
be accessible.
Grid-AIS-L4-ITI_Model_PCL-1124-2017_08-EN. © Copyright 2017. General Electric Company
and Instrument Transformers LLC reserve the right to change specifications of described
products at any time without notice and without obligation to notify any person of such changes.