Instrument Transformer, Div of GE 617 Data Sheet

GE

Energy Connections

Model 617

Current Transformer Split Core/Clamp
Window Size 2.00”x 3.50”

Application

For energy management systems and
instrumentation.

Frequency

50-400 Hz.

Insulation Level

600 Volts, 10 kV BIL full wave.

Construction

The core and winding are encased in U.L.
approved plastic.

Continuous Thermal Current
Rating Factor

1.33 at 30°C. amb., 1.0 at 55°C. amb.

Terminals are 8-32 brass studs with
one
flatwasher, lockwasher, and regular
nut.

Flexible leads UL 1015, 105°C , CSA
approved, #16 AWG, 24” long are
available.

Approximate Weight 1.2 lbs.

REGULATORY AGENCY APPROVALS

Manufactured to meet the requirements of ANSI/IEEE C57.13.
Transformers comply with IEC 61689

Model 617 SPLIT CORE/CLAMP ON

These transformers are designed for assembly to an existing electrical installation without the need for dismantling the primary bus or cables.

Caution:

Proper safety precautions must be followed during installation by a trained electrician. Never install while bus is energized.

The current transformer must have its secondary terminals short circuited or the burden connected, before energizing the primary circuit.

Grid-AIS-L4-ITI_Model_617-1352-2017_06-EN. © Copyright 2017. General Electric Company
and Instrument Transformers LLC reserve the right to change specifications of described
products at any time without notice and without obligation to notify any person of such changes.