GE
Energy Connections
Model 616
Current Transformer Split Core/Clamp On
Window Size 1.31”x 2.16”
Application
For energy management systems and
instrumentation equipment.
Frequency
50-400 Hz.
Insulation Level
0.6 kV, BIL 10 kV full wave.
Construction
The core and winding are encased in U.L.
approved plastic.
Continuous Thermal Current
Rating Factor
1.33 at 30°C. amb., 1.0 at 55°C. amb.
Flexible leads UL 1015, 105°C ,, #16
AWG, 36” long unless otherwise
specified.
Approximate Weight 1.2 lbs.
REGULATORY AGENCY APPROVALS
CANADIANC
C
CC
Model 616 Split Core/Clamp On
This transformer is designed for assembly to an existing electrical installation without the need for dismantling the primary bus or cables.
Caution:
Proper safety precautions must be followed during installation by a trained electrician. Never install while bus is energized.
The current transformer must have its secondary terminals short circuited or the burden connected, before energizing the primary circuit.
Grid-AIS-L4-ITI_Model_616-1564-2017_06-EN. © Copyright 2017. General Electric Company
and Instrument Transformers LLC reserve the right to change specifications of described
products at any time without notice and without obligation to notify any person of such changes.
Loading...