Instrument Transformer, Div of GE 614 Data Sheet

GE

Energy Connections

Model 614

Current Transformer with Split Core / Clamp On
Window Size 0.75”x 0.75”

Application

For energy management systems and
instrumentation equipment.

Frequency

50-400 Hz.

Insulation Level

0.6 kV, BIL 10 kV full wave.

Continuous Thermal
Current Rating Factor

1.33 at 30 °C. amb,

1.0 at 55 °C. amb.

Construction

The core and winding are encased in
U.L.
approved plastic.

Flexible leads are UL 1015, 105 ° C ,
#18 AWG, 36” long unless otherwise
specified.

Approximate Weight 0.4 lbs.

REGULATORY AGENCY APPROVALS

CANADIANC

C

CC

Model 614 Split Core / Clamp On

This transformer is designed for assembly to an existing electrical installation without the need for dismantling the primary bus or cables.

Caution:

Proper safety precautions must be followed during installation by a trained electrician. Never install while bus is energized.

The current transformer must have its secondary terminals short circuited or the burden connected, before energizing the primary circuit.

Grid-AIS-L4-ITI_Model_614-1562-2017_06-EN. © Copyright 2017. General Electric Company
and Instrument Transformers LLC reserve the right to change specifications of described
products at any time without notice and without obligation to notify any person of such changes.