Instrument Transformer, Div of GE 606, 608 Data Sheet
GE
Grid Solutions
Models 606 & 608
Current Transformers with Split Core
Window Sizes 2.75” x 2.70”, 2.60”x 6.25”
Application
For energy management systems
and instrumentation.
Frequency
50-400 Hz.
Insulation Level
0.6 kV, BIL 10 kV full wave.
Environment
Suitable for use in wet location
environments
REGULATORY AGENCY APPROVALS
Continuous Thermal
Current Rating Factor
Model 606:
1.33 at 30 °C. amb.,
1.00 at 55 °C. amb.
Models 608-501 thru 608-202:
1.33 at 30 °C. amb.,
1.00 at 55 °C. amb.
Models 608-252 thru 608-322:
1.0 at 30 °C. amb.,
0.7 at 55 °C. amb.
Secondary Cable: Two No. 16 AWG
6 feet long,
Approximate Weight:
Model 606......4.5 lbs.
Model 608......7.5 lbs.
REGULATORY AGENCY APPROVALS
Manufactured to meet the requirements of ANSI/IEEE C57.13.
Transformers comply with IEC 61689
Manufactured to meet the requirements of ANSI/IEEE C57.13.
Transformers comply with IEC 61689
Models 606 & 608 Split Core
These transformers are designed for assembly to an existing electrical installation without the need for dismantling the primary bus or cables.
Caution:
Proper safety precautions must be followed during installation by a trained electrician. Never install while bus is energized.
The current transformer must have its secondary terminals short circuited or the burden connected, before energizing the primary circuit.
Grid-AIS-L4-ITI_Model_606_608-1558-2017_10-EN. © Copyright 2017. General Electric Company
and Instrument Transformers LLC reserve the right to change specifications of described
products at any time without notice and without obligation to notify any person of such changes.
Loading...