INSTEON Hub, 2242-222, 2242-422, 2242-522 Quick Start Manual

Page 1
INSTEON Hub
Quick Start Guide
2242-222 (US), 2242-422 (EU), 2242-442 (UK), 2242-522 (AUS/NZ)
Page 2
The INSTEON Hub lets you setup, control and manage your INSTEON devices from your smartphone or tablet.
Use the INSTEON for Hub App to set timers and schedules, program devices and receive alerts.
Get Started
1
Page 3
X
1
Connect the INSTEON Hub directly to a wall outlet and your internet router using only the cables provided
Setup the INSTEON Hub
2
Avoid power strips and switched outlets
Page 4
insteon for hub
INSTEON for Hub
X
INSTALL
2
From your mobile device, download and install INSTEON for Hub from the Apple App Store or Google Play
3
Page 5
3
Launch the App and follow the on-screen instructions to create an account and setup the INSTEON Hub
INSTEON Login
New Account
Existing Account
4
Setup Complete
Page 6
www.insteon.com/pc
INSTEON for Windows
DOWNLOAD
On your PC, download HouseLinc from insteon.com/pc and follow the on-screen instructions
Use the INSTEON Hub with any control software that supports using the Hub as an INSTEON modem
5
Use the Hub as an INSTEON Modem
www
Page 7
MANUAL
INSTEON Hub.pdf
TECH SUPPORT
www.insteon.com/support
INSTEON Phone Support
5AM - 7PM Monday - Friday 6AM - 3PM Saturday Pacic Time
866-243-8022
6
For More Info
Page 8
This product has been thoroughly tested by Intertek ETL, a nationally recognized independent third-party testing laboratory. The North American
ETL Listed mark signies that the device has been tested to and has met
the requirements of a widely recognized consensus of U.S. and Canadian device safety standards, that the manufacturing site has been audited, and that the manufacturer has agreed to a program of quarterly factory follow-up inspections to verify continued conformance.
FCC and Industry Canada Compliance Statement
This device complies with FCC Rules Part 15 and Industry Canada RSS-210 Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorise aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d’en compromettre le fonctionnement.
The digital circuitry of this device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such
interference, which can be veried by turning the device off and on, the user
is encouraged to eliminate the interference by one or more of the following measures:
- Re-orient or relocate the receiving antenna of the device experiencing the interference
- Increase the distance between this device and the receiver
- Connect the device to an AC outlet on a circuit different from the one that supplies power to the receiver
- Consult the dealer or an experienced radio/TV technician
WARNING: Changes or modications to this device not expressly approved
by the party responsible for compliance could void the user’s authority to operate the equipment.
Protected under U.S. and foreign patents (see www.insteon.com/patents)
Rev 04.10.13
Loading...