How it Works
INSTEON
Loading...
2856S3B
User Manual
15 pgs643.57 Kb0

INSTEON 2856S3, 2856S3B User Manual

ICON Appliance Adapter
Appliance Module with INSTEON® Technology
ICON Appliance Adapter User’s Guide
TABLE OF CONTENTS
ABOUT ICON APPLIANCE ADAPTER .......................................................................................................3
What is INSTEON?.................................................................................................................................... 3
Key ICON Appliance Adapter Features..................................................................................................... 3
HOW TO INSTALL ICON APPLIANCE ADAPTER..................................................................................... 4
ICON Appliance Adapter Installation Tips .................................................................................................4
Installing ICON Appliance Adapter............................................................................................................ 4
HOW TO SET UP ICON APPLIANCE ADAPTER.......................................................................................5
Linking ICON Appliance Adapter to an INSTEON Controller.................................................................... 5
Unlinking ICON Appliance Adapter from an INSTEON Controller ............................................................ 6
Creating an INSTEON Scene.................................................................................................................... 7
ADVANCED FEATURES OF ICON APPLIANCE ADAPTER..................................................................... 8
Restoring Power to ICON Appliance Adapter ........................................................................................... 8
Resetting ICON Appliance Adapter to Its Factory Default Settings ..........................................................8
X10 PROGRAMMING OPTIONS .................................................................................................................9
Setting the X10 Primary Address ..............................................................................................................9
Removing the X10 Primary Address ......................................................................................................... 9
Enabling or Disabling Local Control ..........................................................................................................9
ABOUT INSTEON ......................................................................................................................................10
Understanding Why an INSTEON Network Is Reliable........................................................................... 10
Further Enhancing Reliability ..................................................................................................................10
Using Access Points to Upgrade Your INSTEON Network..................................................................... 10
About INSTEON and X10........................................................................................................................ 11
TROUBLESHOOTING................................................................................................................................12
SPECIFICATIONS ......................................................................................................................................13
ICON Appliance Adapter Specifications.................................................................................................. 14
Certification.............................................................................................................................................. 15
Limited Warranty .....................................................................................................................................15
Icon Appliance Adapter User’s Guide
Outlet
ABOUT ICON APPLIANCE ADAPTER
Congratulations on purchasing the ICON Appliance Adapter. Your new ICON Appliance Adapter allows you to remotely control any non-dimmable devices or lamps in your home at the touch of a button.
SET Button
Status LED
Controlled
What is INSTEON?
INSTEON is a simple, reliable, and affordable breakthrough in home control. Simple, because Plug-n­Tap™ setup is a breeze, and there are no wires to add – INSTEON uses existing powerline wiring as well as radio-frequency for communication. Reliable, because every INSTEON device is a two-way repeater. And affordable, not just because of low cost, but because INSTEON also works with legacy X10 devices. An INSTEON home grows in value with every INSTEON device you add, making life more convenient, safe and fun.
Key ICON Appliance Adapter Features
• Setup is easy – ICON Appliance Adapter installs in minutes
• Controls all standard appliances up to 10 Amps and incandescent lights, up to 400 watts
• Responds to commands from X10 controllers
• Shows INSTEON and X10 activity with a green status LED
• Stores setup state in memory, even while unplugged
• Quiet Relay
• Local load sensing easily disabled
• Set button also functions as On/Off toggle switch
• Warranted for one year
Page 3 of 15
Icon Appliance Adapter User’s Guide
HOW TO INSTALL ICON APPLIANCE ADAPTER
Caution
Read and understand these instructions before installing, and retain them for future reference.
Icon Appliance Adapter is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. Use indoors only. Icon Appliance Adapter is not designed nor approved for use on power lines other than 120V 60Hz, single phase. Attempting to use Icon Appliance Adapter on non-approved powerlines may have hazardous consequences.
ICON Appliance Adapter Installation Tips
• Don’t plug ICON Appliance Adapter into an outlet controlled by a switch, because if the switch is inadvertently turned off, ICON Appliance Adapter won’t have power.
• Don’t plug Icon Appliance Adapter into a filtered power strip or AC line filter.
• Be sure the non-dimmable device or lamp you want to control is working and that the manual switch
on it is in the ON position.
• Do not use outdoors
• Do not use to control devices that preserve, maintain, or contribute to human or animal safety or life
support.
Installing ICON Appliance Adapter
1. For best INSTEON Network performance, be sure you have properly installed at least two Access Points.
2. Plug ICON Appliance Adapter into an unswitched wall receptacle. The green Status LED on the side will illuminate steadily.
3. Plug the non-dimmable device/lamp you want to control into the controlled outlet on the bottom of ICON Appliance Adapter.
4. The non-dimmable device/lamp you plugged in will turn on. If the non-dimmable device/lamp does not turn on, turn it on manually.
Page 4 of 15
Icon Appliance Adapter User’s Guide
HOW TO SET UP ICON APPLIANCE ADAPTER
Linking ICON Appliance Adapter to an INSTEON Controller
1. Select your INSTEON Controller from the list below and follow the method shown to put it into Linking Mode.
A. ICON Dimmer Switch – Press and hold ICON Dimmer Switch’s Paddle Top for 10
seconds, then release. To confirm that it is in Linking Mode, ICON Dimmer Switch will flash the light that it is wired to once and begin its LED.
B. ICON Tabletop Controller – Choose the ON/OFF Button Pair you want to use for
controlling ICON Appliance Adapter. Press and hold the ON Button of the pair for 10 seconds. To confirm that it is in Linking Mode, ICON Tabletop Controller’s Status LED will begin blinking.
C. ICON Keypad Dimmer – Choose the ON Button you want to use for controlling ICON
Appliance Adapter. Press and hold the ON Button for 10 seconds. To confirm that it is in Linking Mode, ICON Keypad Dimmer will flash the light that it is wired to once and begin blinking the ON Button that you pushed.
D. Other INSTEON Controllers – See the INSTEON Controller’s User’s Guide.
2. Press and hold the black SET Button on ICON Appliance Adapter for 3 seconds. The ICON Appliance Adapter’s Status LED will blink to confirm linking. Depending on the INSTEON controller, you have about 4 minutes to perform this step before the unit automatically exits from linking mode.
Page 5 of 15
Loading...
+ 10 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use