iMeter Solo
Model : 2423A1
INSTEON® Power Meter (Plug-In)
iMeter Solo Owner’s Manual
TABLE OF CONTENTS
ABOUT iMETER SOLO ................................................................................................................................ 3
Key iMeter Solo Features .......................................................................................................................... 3
What is Included with iMeter Solo ............................................................................................................. 3
WHAT IS INSTEON? .................................................................................................................................... 4
INSTALLATION iMETER SOLO .................................................................................................................. 4
Preparing to Install iMeter Solo ................................................................................................................. 4
Product Use Restrictions ........................................................................................................................... 5
Installing iMeter Solo ................................................................................................................................. 5
USING iMETER SOLO TO MEASURE POWER CONSUMPTION OF YOUR HOUSEHOLD
APPLIANCES ............................................................................................................................................... 5
Adding iMeter Solo to HouseLinc .............................................................................................................. 5
Viewing Power Consumption in HouseLinc ............................................................................................... 6
Storing/Tracking Power Consumption Information in HouseLinc .............................................................. 6
Viewing Power Consumption in SmartLinc ............................................................................................... 7
ADVANCED FEATURES ............................................................................................................................. 7
Restoring Power to iMeter Solo ................................................................................................................. 7
Resetting iMeter Solo to its Factor y Default Sett in gs ................................................................................ 8
ABOUT INSTEON ........................................................................................................................................ 8
Using Dual-Band INSTEON Devices to Upgrade Your Network ............................................................... 8
Important Note about INSTEON Networks; Split Single-Phase vs. 3-Phase Installation.......................... 8
Further Enhancing Reliability .................................................................................................................... 9
ADDITIONAL RESOURCES ........................................................................................................................ 9
TROUBLESHOOTING .................................................................................................................................. 9
SPECIFICATIONS, CERTIFICATION, AND WARRANTY .......................................................................... 9
Specifications ............................................................................................................................................ 9
Certification ................................................................................................................................................ 9
Limited Warranty ..................................................................................................................................... 10
iMeter Solo Owner’s Manual
Set button
Status LED
Outlet
ABOUT iMETER SOLO
You can use iMeter Solo to measure, track, and monitor the energy usage of your appliances via
HouseLinc and other compatible programs.
Key iMeter Solo Features
• Installs and Links to other INSTEON devices in minutes
• Measures your appliance po wer consumption
• Indicates INSTEON setup mode activity and operational states with a Status LED and beeper
• Stores setup state in memory so settings aren’t lost during power outages or when unplugged
• Two-year warranty
What is Included with iMeter Solo
• iMeter Solo – Power Meter (Plug-In)
• Quick-Start Guide
Page 3 of 10
iMeter Solo Owner’s Manual
WHAT IS INSTEON?
Since its inception in 2005, INSTEON has become a best-selling home-control networking technology,
offering more reliability and flexibility than any other home management system on the market. INSTEON
systems are sim ple, reliable, a nd affor dable. Simple, because each device tak es mere minutes to install.
Reliable, because ever y INST EON dev ice work s as a network repeater, e nsurin g your c omm ands will not
be lost. Affordable, bec ause INST EON can be int egrated i nto any num ber of devic es easil y and at a very
low cost. An INSTEON home grows in value with each added INSTEON device, making life more
convenient, safe, and fun.
How Does INSTEON Work?
What makes INSTEON the most reliable home automation network is its dual-mesh network. INSTEON
devices use both radio frequency (RF) signals and the home’s existing wiring to talk to each other. In an
INSTEON network, every INSTEON device also acts as a repeater, receiving and sending every message to all
other devices in the network. So by integrating more INSTEON devices you will strengthen the network and
ensure no commands will be lost.
No central controller or networking setup is required with an INSTEON network. Simply install your devices and
then use a series of button presses or taps to Link your devices together. Throughout this Owner’s Manual, you
may see the terms “Controller” or “Responder”. These generic INSTEON terms refer to the components of an
INSTEON scene, and are used on a scene-by-scene basis.
• Controller – sends INSTEON commands to other devices
• Responder – reacts to commands sent out by another INSTEON device
An INSTEON device may act as a Controller, Responder, or sometimes both.
INSTEON networks are also extremely secure. Each INSTEON device is assigned a unique INSTEON ID, s o
unless neighbors or would-be hackers have access to your particular device’s INSTEON ID, they won’t be able
to control your home, even if they are using similar products.
INSTALLATION iMETER SOLO
Preparing to Install iMeter Solo
CAUTION
Read and understand these instructions before installing and retain them for future reference.
iMeter Solo is in tended f or i nstallat ion in acc ord ance w ith the Na tiona l Electric Code an d loc al regul ations
in the United States or the Canadian Electrica l Code and local regulat ions in Canada. Use indo ors only.
iMeter Solo is not designed nor approved for use on power lines other than 120V 60Hz, single phas e.
Attempting to use iMeter Solo on non-approved power lines may have hazardous consequences.
Prior to installing iMeter Solo, please review the entire installation procedure and take the following
precautions:
• Use indoors or in a properly insulated and weatherproof electrical box only
• Don’t plug iMeter Sol o into an outlet contro lled by a switch because if the s witch is ina dvertentl y
turned off, iMeter Solo won’t have power
• Don’t plug iMeter So lo into a filtered power strip or AC filter
If you have any questions, please call:
INSTEON Gold Support Line
800-762-7845
Page 4 of 10
iMeter Solo Owner’s Manual
Product Use Restrictions
Use only as directed in the instr uctions and within the specificatio ns and envir onm ental conditions below.
Using iMeter Solo in a different manner may defeat the safety features and pr otection against electrical
shock and fire.
• 120 Volts AC +/- 10%, 60 Her t z, 15 Am ps maximu m c ontinuous
• Indoor use only
• Temperature 41° to 104° F (5° to 40° C)
• Maximum relative hum idity 80% for temperatures up to 87° F (31° C) decreasing linearl y up to
50% relative humidity at 104° F (40° C)
• Altitude up to 6,500 feet (2,000 meters)
• Installation Category II
• Pollution Degree 2
Installing iMeter Solo
1) Plug the desired appliance into the outlet on iMeter Solo
2) Plug iMeter Solo into an unswitched outlet
iMeter Solo will beep and its Status LED will turn on solid green
After about 20 seconds, iMeter Solo will beep again
USING iMETER SOLO TO MEASURE POWER CONSUMPTION OF YOUR HOUSEHOLD APPLIANCES
Adding iMeter Solo to HouseLinc
1) In HouseLinc, click the icon and then click t he Auto Link
tab. Then, click Start.
The Linking time remaining: countdown will begin
2) On iMeter Solo, press & hold the Set button until it beeps (3
seconds)
iMeter Solo will display in the Auto Link list in
HouseLinc
3) In HouseLinc, click OK
iMeter Solo will appear in the Devices list
HouseLinc will begin synchronizing with iMeter So lo
Page 5 of 10
iMeter Solo Owner’s Manual
Viewing Power Consumption in HouseLinc
Choose iMeter Solo f rom the Devices
list and then select the Control/Status
tab to begin viewing energy
information for the appliance plugged
into the bottom of iMeter Solo.
NOTE: For loads over 1,000 Watts,
iMeter can take up to 10 seconds to
stabilize the reading when there is a
drastic change in power (e.g., the
appliance is turned off).
Storing/Tracking Power Consumption Information in HouseLinc
iMeter allows you to s ave the applia nce’s power cons umption inform ation to a C SV file so you ca n track
and monitor the applia nce’s energy usage o ver time. T o save power consum ption information, set up an
event in HouseLinc:
1) In HouseLinc, click the Events tab and click Add Event
2) Drag the desired icons into the Trigger(s) pane and edit as necessary
3) Drag iMeter Solo from the Devices list into the Action(s) pane
4) If desired, change where the file will be saved by clicking Edit and then clicking on the file location
5) Click OK to save the event
Page 6 of 10
iMeter Solo Owner’s Manual
1) Update your SmartLinc .bin file:
) will be used exclusively for iMeter Solo.
4) Choose the room you just renamed and type in the
Viewing Power Consumption in SmartLinc
From SmartLinc, you will be able to view the Instantaneous Power used for individual iMeter Solos.
NOTE: Once you uploa d the .bin file with iMeter S olo support, SmartLinc w ill only support population of
up to 14 rooms (t he 15
currently using room 15, please be sure to move those devices/scenes to another room before you
update your .bin file.
a. Download the .bin file at: www.smarthome.com/files/iMeter20110426mg2.bin
b. Connect to SmartLinc through your browser
c. Click the
d. Click “Change Application Version”
e. Click “Browse” and select the .bin file
f. Click “Upload”
A confirmation screen will say “MPFS Update Successful”
g. Click “Main Page”
2) Click the
3) Scroll down to the bottom of the Room list. The 15th room
(located at the bottom of the list, next to the room named
“Thermostat”
Rename the room and then click “Save and return”.
th
room will be des ignated to iMeter Solo and t he 16th to Therm ostat). If you are
icon
icon
INSTEON ID of the desired iMeter Solo
5) Click “Refresh”
NOTE: Only one iMeter Solo can be m onitored within SmartLinc
at a time. To monitor anoth er iMeter, enter th e INSTEON ID and
click Refresh.
ADVANCED FEATURES
Restoring Power to iMeter Solo
iMeter Solo stores all of its settings, such as Links to other INSTEON devices, etc., with non-volatile
memory. Because set tings are saved in t his non-volatile memory, they will not b e lost in the event of a
power failure.
Page 7 of 10
iMeter Solo Owner’s Manual
Resetting iMeter Solo to its Factory Default Settings
The factory reset procedure can be used to clear the iMeter Solo memory of all INSTEON Links.
1) Unplug iMeter Solo for about 10 seconds
2) While holding down the Set button on iMeter Solo, plu g it back in, mak ing sure not to let go of the Set
button
iMeter Solo will beep and its Status LED will turn on solid red
3) Continue to hold down the Set button for 3 seconds and then release
The iMeter Solo Status LED will turn solid green
After a few seconds, iMeter Solo will double-beep
ABOUT INSTEON
Using Dual-Band INSTEON Devices to Upgrade Your Network
What are phases?
The majority of single-family homes in North America have two phases (or “legs”) of 110 Volts coming into their
electricity panels. From the panel, they are distributed throughout the home, providing power to outlets and wall
switches. These phases come together in some parts of the home to provide 220 Volts of power to large
appliances, such as an electric oven or pool pump.
Why do I need to bridge these phases?
Single-band power line devices send commands via the home’s electricity, but only on a single phase. If the
command is intended for a device on the opposite phase, there is a good chance the command will go
unnoticed. Installing dual-band INSTEON devices, such as Access Points (#2443), on each phase will allow for
devices to communicate between the two phases via RF.
Dual-band INSTEON devices embody the full potential of a true INSTEON mesh network. Taking the power
line band signal and working in conjunction with the RF band signal, its dual-band function plays out in two
ways:
• Phase bridger – a receiver of commands, reacting to and translating signals sent from one power
phase to the opposite via RF
• Signal repeater – a participant in an INSTEON network, repeating commands intended for other
devices whether those commands are generated from RF or power line-only devices. To ensure
reliability, every INSTEON device confirms that it has received a command. If a Co ntroller does not
receive this confirmation, it will automatically retransmit the command up to five times.
While using at least one dual-band device is required w hen using an RF-only device, at least two dual-band
devices are recommended to ensure reliable communication across two-phase home wiring systems. For
larger applications, it is recommended to install at least one dual-band device for every 750 – 1,000 square
feet.
Search for dual-band INSTEON devices at: www.smarthome.com/dualband
Important Note about INSTEON Networks; Split Single-Phase vs. 3-Phase Installation
For the best INSTEON network performance, be sure you have properly installed at least two Access Points or other
dual-band INSTEON devices. INSTEON has only been officially tested in a split single-phase residential environment,
but has been known to work in many 3-phase systems, where three dual-band devices are used (one on each
phase). However, due to the potential complexity of its troubleshooting, the INSTEON Gold Support Line is unable to
support INSTEON in 3-phase env ir on ment s.
Page 8 of 10
iMeter Solo Owner’s Manual
Problem
Possible Cause
Solution
The Status LED on
Unplug iMeter Solo for at least 10 seconds and then
If the above doesn’t work, perform a factory reset.
Further Enhancing Reliability
As signals travel via the power line or RF throughout the home, they naturally become weaker the farther they travel.
The best way to overcome weakened signals is to increase the coverage of the mesh network by introducing more
INSTEON devices.
It is possible that some audio-video devices, computers, power strips, or other electrical equipment may attenuate
INSTEON signals on the power line. You can temporarily unplug suspected devices to test whether the INSTEON
signal improves. If it does, then you can plug in filters that will permanently fix the problem.
ADDITIONAL RESOURCES
Find home automation solutions, helpful tips, interactive demos, videos, user forums, and more at the
Smarthome Learning Center: www.smarthome.com/learningcenter.html
TROUBLESHOOTING
iMeter Solo is not
turning on.
iMeter Solo is locked
up.
If you have tried these solutions, reviewed this Owner’s Manual, and still cannot resolve an issue you are
having with iMeter Solo, please call:
iMeter Solo may not be
getting power.
A surge or excessive noise
on the power line may have
glitched it.
INSTEON Gold Support Line
800-762-7845
Make sure iMeter Solo is not plugged into a switched
outlet that is turned off.
reinstall.
See Resetting iMeter Solo to its Factory Default
Settings.
SPECIFICATIONS, CERTIFICATION, AND WARRANTY
Specifications
View specifications for iMeter Solo at: www.smarthome.com/2423A1.html
Certification
This product has been thoroughly tested by Intertek Testing Services NA, a national ly recognized independent
third-party testing laboratory. The North American ETL Listed mark signifies that the device has been tested to
and has met the requirements of a widely recognized consensus of U.S. and Canadian device safety
standards, that the manufacturing site has been audited, and that the manufacturer has agreed to a program of
quarterly factory follow-up inspections to verify continued conformance.
Page 9 of 10
iMeter Solo Owner’s Manual
Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date
of purchase, this product will be free from defects in material and workmanship and will perform in substantial
conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to def ects or
errors caused by misuse or neglect. If the product is found to be def ective in material or wo rkmanship, or if the
product does not perform as warranted above during the warranty period, Seller will either repair it, replace it,
or refund the purchase price, at its option, upon receipt of the product at the address below, postage prepaid,
with proof of the date of purchase and an explanation of the defect or error. The repair, replacement, or refund
that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or
replacement during the warranty period, call the INSTEON Gold Support Line at 800-762-7845 with the Model
# and Revision # of the device to receive an RMA# and send the product, along with all other required
materials to:
Smarthome, Inc.
ATTN: Receiving Dept.
16542 Millikan Ave.
Irvine, CA 92606-5027
Limitations
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or
implied, including any warranty or merchantability or fitness for a particular purpose. Any implied warranty,
including any warranty of merchantability or fitness for a particular purpose, which may not be disclaimed or
supplanted as provided above shall be limited to the two-year of the express warranty above. No other
representation or claim of any nature by any person shall be binding upon Sell er or modify the terms of the
above warranty and disclaimer.
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical
tampering. For optimal use, manually verify the device state. Any home automation device should be viewed as
a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from
possession or use of this device, including without limitation damage to property and, to the extent permitted by
law, personal injury, even if Seller knew or should have known of the possibility of such damages. Some states
do not allow limitations on how long an implied warranty las ts and/or the exclusion or limitation of damages, in
which case the above limitations and/or exclusions may not apply to you. You may also have other legal rights
that may vary from state to state.
INSTEON Technology Patent
U.S Patent No. 7,345,998, International patents pending
© Copyright 2011
Smarthome, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845, www.smarthome.com
Rev 05-09-2011
Page 10 of 10
Loading...