INSTEON 2410S Quick Start

Quick-Start Guide

SeriaLinc™ – INSTEON® to 2-Way RS-232 Serial Converter

Model: 2410S

Introduction

Connect any serial and/or RS-232 compatible devices to your
INSTEON network. From whole-home audio to security systems to
automation controllers, you can now keep the equipment you
already own and take advantage of a reliable INSTEON network.
SeriaLinc is a 2-way serial, meaning it can be used to control RS­232 devices or to control INSTEON devices via RS-232 commands.

Null Modem

Adapter

Pass-through

Set button

Status LED

SeriaLinc

What is Included

• SeriaLinc

• RJ-45 (male) to DB-9 (female) serial cable

• Null modem adapter

• Free software download

System Requirements

• Windows 2000, XP, or Vista (32-bit)

• 15MB free disk space

• Minimum 128MB RAM

Installation

Before beginning installation, be sure you have downloaded the SeriaLinc Downloader application and created a CSV
file (see Owner’s Manual).

1) Plug SeriaLinc into an electrical outlet (make sure SeriaLinc will be able to
reach your computer with the included serial cable or use an extension cord)

2) Tap the Set button on SeriaLinc to enter Configuration Mode

3) Connect SeriaLinc to your computer using the included serial cable

4) In the SeriaLinc Downloader application, open the CSV file

5) Devices that are responding to serial codes (defined as 1 in the CSV file) will

6) Choose the com port SeriaLinc is connected to

7) Select “Download to SeriaLinc”

8) When prompted, unplug SeriaLinc and plug it back in, making sure not to tap

9) Close the SeriaLinc Downloader application

The SeriaLinc Status LED should begin blinking

need to be Linked to SeriaLinc according to their defined group number (third
parameter on the same line in the CSV file)

a. Click the appropriate button on the right side of the application

interface for SeriaLinc to enter the defined group’s Linking Mode
b. Press & hold the Responder’s Set button for 3 seconds
c. Repeat steps A and B as needed

the Set button

The SeriaLinc Status LED should stop blinking

10) Plug SeriaLinc into your RS-232 device using the included null modem
adapter

Complete Instructions, Troubleshooting, and Tech Support

Owner’s Manual: www.smarthome.com/manuals/2410s.pdf

INSTEON Gold Support Line at 800-762-7845

Call:

Page 1 of 1
Rev. 03-14-2011

Smarthome Limited Warranty – Smarthome warr ants to original consumer of this product for a per iod of 2 years from date of purchase, this product will b e
free from defects in material & workmanship & will pe rform in substantial conformity with its Owner 's Manual. Warranty shall not apply to defec ts caused by
misuse or neglect.
U.S. Patent No. 7,345,998, International patents pending © Copyright 201 1
Smarthome, 16542 Millikan Ave., Ir vine, CA 92606, 800-762-7845