Page 1
Insteon Hub
Owner’s Manual
Page 2
Contents
Getting Started
Insteon Hub 4
Device Overview
Installation
Download the App
Create an Account
Optional Wall Mounting 5
Insteon App
Insteon App on iOS 7
Insteon App on Android 12
Insteon App on Windows 17
Hardware Reset
Diagnostics 22
Network Reset 23
Factory Reset 24
Appendix
Specications 28
Troubleshooting 30
Certications and Warnings 33
Product Warranty 34
Page 3
Getting Started
Everything you need to quickly get up and running.
3
Page 4
Insteon Hub
X
Device Overview
Status LED Linking
Unlinking/Network Issue
Ethernet Port
Factory Reset Power
Ethernet
Cable
Power
Cable
Installation
Connect your Hub to the internet and a power
outlet using the cables provided. Avoid switched
outlets or ltered power strips.
Download the App Create an Account
From your mobile device, download
and install Insteon for Hub from your
device’s app store.
insteon for hub
INSTEON for Hub
Launch the App and follow the on-screen
instructions to create an account and setup
the Insteon Hub.
INSTEON
Sign In
Create an Account
You’re done setting up your Insteon Hub;
now start adding devices.
4
Page 5
Optional Wall Mounting
Print out this page and use it as a
1
template to drill mounting holes.
2 1/32”
15/32”
12mm
52mm
Hang the Hub on two screws
2
by aligning the hanger slots and
sliding down.
Screw head should
be about 5/16”
(8mm) in diameter
15/32”
12mm
2 1/32”
52mm
5
Page 6
Insteon App
Use the Insteon App to congure and control your Insteon Hub. Everything
from adding a device to controlling your thermostat is handled through the
app.
6
Page 7
Insteon App on iOS
The Insteon app on iOS uses a right-hand
drawer to navigate between Check-In,
Favorites, Rooms, Scenes, Thermostats and
Settings. You can also add and edit devices,
rooms and scenes from the drawer.
Check-In Favorites
An at-a-glance overview of all of your Insteon
sensors. Sensors are white when red when
triggered and white when not.
2:10 PM
Check-In
Back Door Front DoorBackyard
Motion
Garage Door Kitchen SinkGarage Motion
Smoke Sensor
A customizable screen where you can place
your most used devices, scenes and sensors.
2:10 PM
Favorites
All Devices BedroomBathroom
Check-In GarageFavorites
Kitchen OutsideLiving Room
7
Page 8
Insteon App on iOS
2:10 PM
2:10 PM
Lets you group devices into rooms for easier
navigation.
ScenesRooms
Automatically displays all of the scenes that
have been created.
2:10 PM
Rooms
Bathroom KitchenBedroom
Living Room OutsideGarage
Thermostat Settings
Displays your Insteon or Nest Thermostat.
For homes with multiple thermostats, you
can congure the default from settings.
2:10 PM
Scenes
Good Morning All OffMovie Time
Your one-stop-shop for Hub and Insteon
account settings and conguration. You can
also nd in-app help here.
Living Room
Thermostat
º
74
Heat to Cooling to
º
65º72
Off Heat Cool Auto Fan
Settings Done
Devices
Scenes
Rooms
Schedules
House
House Management
danny@email.com
Account
ALWAYS
About INSTEON App
Get Latest Configuration
8
3
6
1
Home
1
8
Page 9
Controlling a Device
Living Room
2:10 PM
Floor Lamp
2:10 PM
On
O
2:10 PM
Floor Lamp
Living Room
2:10 PM
42%
Floor Lamp
Living Room
2:10 PM
42%
Floor Lamp
Living Room
2:10 PM
Insteon App on iOS
2:10 PM
Living Room
Floor Lamp
On
O
Additional Device Control
On
O
Tap to turn the device on or o
Tap for additional control and to
edit the device.
42%
Living Room
Floor Lamp
Tap On
Tap O
Turn a device on or o,
regardless of brightness
Quickly adjust the brightness
Tap the arrows to adjust in
10%-ish increments
9
Page 10
Monitoring a Sensor
2:10 PM
Garage
2:10 PM
2:10 PM
Living Room
Motion Sensor
Insteon App on iOS
Indicates that your sensor is not
triggered
Motion Detected
Controlling a Camera
Garage
Indicates that your sensor has
been triggered
Indicates that the Hub has lost
contact with your sensor
If a newly added sensor shows
yellow, try activating it.
Garage Lights Garage Door Camera
Tap the arrows to pan and tilt
your camera
10
Page 11
Scene
2:10 PM
Bedtime
On
Off
Controlling a Scene
Scene
2:10 PM
Bedtime
On
Off
2:10 PM
Scenes
2:10 PM
Bedtime
2:10 PM
On
O
Insteon App on iOS
Scenes
Bedtime
On
O
Additional Scene Control
On
O
Tap to turn the scene on or o
Tap for additional control and to
edit the scene.
Tap to turn the scene on or o
11
Page 12
2:10 PM
BedroomBathroom
Garage
Kitchen OutsideLiving Room
Favorites Rooms Scenes Check-In Temp Settings
72º
Favorites
2:10 PM
Backyard
Motion
Back Door Front Door
Garage Door
Smoke Sensor
Kitchen SinkGarage Motion
Favorites Rooms Scenes Check-In Temp Settings
72º
Check-In
2:10 PM
BedroomBathroom
Garage
Kitchen OutsideLiving Room
Favorites Rooms Scenes Check-In Temp Settings
72º
Favorites
Insteon App on Android
The Insteon app on Android uses tabs to
navigate between Check-In, Favorites, Rooms,
Scenes, Thermostats and Settings. You can
add and edit devices, rooms and scenes from
the settings button.
Check-In Favorites
An at-a-glance overview of all of your
Insteon sensors. Sensors are red
when triggered and white when not.
A customizable screen where you can place
your most used devices, scenes and sensors.
12
Page 13
Insteon App on Android
2:10 PM
All Devices BedroomBathroom
Check-In GarageFavorites
Kitchen OutsideLiving Room
Favorites Rooms Scenes Check-In Temp Settings
72º
Rooms
2:10 PM
Movie TimeGood Morning
All Off
Favorites Rooms Scenes Check-In Temp Settings
72º
Scenes
Thermostat
72
º
70º78
º
Heat to Cooling to
Off Heat Cool Auto Fan
ALWAYS
2:10 PM
Favorites Rooms Scenes Check-In Temp Settings
72º
Living Room
2:10 PM
Settings
Devices
Scenes
Rooms
Schedules
House
House Management
Account
8
3
6
1
Home
1
danny@email.com
About INSTEON App
Get Latest Configuration
Favorites Rooms Scenes Check-In Temp Settings
72º
Lets you group devices into rooms for easier
navigation. Also the location for All Devices
which displays every device added to your house
ScenesRooms
Automatically displays all of the scenes that
have been created.
Thermostat Settings
Displays your Insteon or Nest Thermostat.
For homes with multiple thermostats, you
can congure the default from settings.
Your one-stop-shop for Hub and Insteon
account settings and conguration. You can
also nd in-app help here.
13
Page 14
Floor Lamp
42%
2:10 PM
Favorites Rooms Scenes Check-In Temp Settings
72º
Favorites
2:10 PM
Floor Lamp
Favorites Rooms Scenes Check-In Temp Settings
72º
Favorites
Controlling a Device
Living Room
2:10 PM
Floor Lamp
2:10 PM
On
O
Floor Lamp
Living Room
2:10 PM
42%
Floor Lamp
Living Room
2:10 PM
42%
Floor Lamp
Living Room
2:10 PM
Insteon App on Android
On
O
Tap to turn the device on or o
Tap for additional control and to
edit the device.
Additional Device Control
Tap On
Tap O
Turn a device on or o,
regardless of brightness
Quickly adjust the brightness
Tap the arrows to adjust in
10%-ish increments
14
Page 15
Motion Sensor
2:10 PM
Favorites Rooms Scenes Check-In Temp Settings
72º
Check-In
Motion Detected
Monitoring a Sensor
Overhead Motion Sensor Garage Door
2:10 PM
Favorites Rooms Scenes Check-In Temp Settings
72º
Favorites
2:10 PM
Favorites
Insteon App on Android
Indicates that your sensor is not
triggered
Indicates that your sensor has
been triggered
Indicates that the Hub has lost
contact with your sensor
If a newly added sensor shows
yellow, try activating it.
Controlling a Camera
Use the arrows to pan and tilt
your camera
15
Page 16
Bedtime
2:10 PM
Favorites Rooms Scenes Check-In Temp Settings
72º
Scenes
On
Off
Bedtime
2:10 PM
On
Off
Controlling a Scene
Bedtime
2:10 PM
Favorites Rooms Scenes Check-In Temp Settings
72º
Scenes
On
Off
2:10 PM
Bedtime
Favorites Rooms Scenes Check-In Temp Settings
72º
Scenes
On
O
2:10 PM
Bedtime
Scenes
2:10 PM
On
O
Insteon App on Android
On
O
Tap to turn the scene on or o
Tap for additional control and to
edit the scene.
Additional Scene Control
Tap to turn the scene on or o
16
Page 17
Insteon App on Windows
The Insteon app on Windows Phone uses a six-screen carousel to switch between Quick View, Favorites,
Rooms, Scenes, Thermostats and Settings.
Quick View Favorites
An at-a-glance overview of all of your
Insteon sensors. Sensors are green
when closed and red when triggered.
A customizable screen where you can place
your most used devices, scenes and sensors.
17
Page 18
Insteon App on Windows
Lets you group devices into rooms. Also the
location for All Devices which displays every
device added to your house.
ScenesRooms
Automatically displays all of the scenes that
have been created.
Thermostats Settings
Displays your Insteon Thermostat. For
homes with multiple thermostats, you can
congure the default from settings.
Your one-stop-shop for Hub and Insteon
account settings and conguration. You can
also nd in-app help here.
18
Page 19
Controlling a Device
Insteon App on Windows
Tap the arrows to adjust in 10%
increments
Slide to quickly adjust the
brightness
Turn a device on or o,
regardless of brightness
Monitoring a Sensor
Indicates that your sensor is OK
Indicates that your sensor has
been triggered
Indicates that the Hub has lost
contact with your sensor
If a newly added sensor shows
yellow, try activating it.
19
Page 20
Controlling a Scene
Insteon App on Windows
Tap to turn the scene on or o
Tap to edit the scene
Controlling a Camera
Use the arrows to pan and tilt
your camera
20
Page 21
Hardware Reset
A network reset will restore the default network conguration to the Hub.
A factory reset will erase all links stored in the device’s database as well as
any customized properties.
21
Page 22
Diagnostics
You can enter an audio diagnostic
mode that will report a connection
issue in six potential areas. Once in
the diagnostic mode, your Hub will
beep through a series of tests.
Tap the set button twice, wait
1
one second and then tap the set
button again once.
2x 1x
Single Beep: Test Passed
Double-Beep: Test Failed
Test 1
Insteon Hub Modem active
Test 2
Internet Time Server reachable
Test 3
Hub has a valid IP Address
Test 4
Connected to Insteon Servers
Test 5
Active remote connection to
Insteon’s Servers
Test 6
Successful remote connection
to Insteon’s Servers at power up
22
Page 23
Network Reset
Tap the set button three times. The
1
Hub will triple-beep.
3x
After a few seconds the Hub will single-
2
beep.
Your Hub has been restored to
default network settings.
23
Page 24
2:10 PM
2:10 PM
2:10 PM
Factory Reset
Prior to performing a factory reset, you
must delete all devices and scenes or
factory reset all of your devices and
delete your user account from Insteon.
Navigate to settings
Settings Done
Devices
Scenes
Rooms
Schedules
House
House Management
danny@email.com
Account
About INSTEON App
Get Latest Configuration
8
3
6
1
Home
1
From Settings, tap Account
21
Account SettingsBack
User Email
Password
Default text/SMS
Remember Me
danny@email.com
Delete Account
••••••••••••••••
None _
Tap Delete Account. This cannot
3 4
be undone and will erase your
home from Insteon Connect.
Account SettingsBack
User Email
Password
Default text/SMS
Remember Me
danny@email.com
••••••••••••••••
Warning
It is strongly recommended that you
delete all devices prior to deleting your
account. Failure to do so will result in
degrated network performance.
Alternatively you may factory reset your
Delete Account
devices after deleting your account.
Cancel OK
None _
Disconnect power from the Hub
4
24
Page 25
Factory Reset
Press and hold the set button
5
while reconnecting power. The
Hub will emit a long beep.
LONG
When the long beep ends,
6
release the set button. The
Hub will double-beep. After 30
seconds, your Hub will beep again.
Unplug and then reconnect your
7
Hub to power.
Your Hub has been restored to
factory settings.
25
Page 26
Appendix
Everything else you might need to know about your Insteon product.
26
Page 27
Insteon Glossary
Controller The Insteon transmitter
Responder The Insteon receiver
Blinking LED turning on and o repeatedly
Dual-Band An Insteon device that can send and receive both Insteon powerline signals and Insteon
radio frequency signals
Ramp Rate The speed at which the load fades on or o
On-Level The preset brightness level a device will return to when turned on
Insteon A dual-band, mesh networking technology developed by Smarthome/Insteon. The world’s
most reliable, expandable and simple home automation and control technology.
Link A one way association between a controller and responder
Linking A method for associating Insteon controller buttons with groups of Insteon responders such
that the responders instantly return to a memorized state when the button is pushed. Links
can be made manually with the set button or using software.
Unlinking The process by which an Insteon device can remove stored links. Just as with linking,
unlinking is a one-way process and should be performed in both directions for devices that
are both controllers and responders of each other, as in a 3-way switch scenario.
Multi-Linking /
Unlinking
Factory Reset A process that erases all stored links and recongures the device to factory defaults.
Load The device that you are controlling (e.g. a light bulb, ceiling fan, etc.)
On/O A device that can control its connected load to turn on and o but cannot dim. Usually a
Retry A 2nd (or subsequent) attempt by a controller to send an Insteon signal, usually after an
Scene Multiple devices respond to memorized states. For example, a dinner time scene turns
Set Button A button on an Insteon device that is used for setting or changing its properties
Simulcast A method for increasing the reliability of message delivery in a network. When a node in
A special mode that allows more than one link to be either created or removed
simultaneously, without laborious set button presses. When in linking or unlinking mode,
an Insteon device will continue to link to other devices until the set button is tapped or four
minutes have elapsed, whichever occurs rst.
relay-based device.
acknowledge is not received from the responder in the expected time-slot.
on the dining table light, dims the kitchen lights to 10%, backyard lights turn o and the
thermostat adjusts to 72º.
a network sends a message, every other node that hears the message retransmits it at
precisely the same time based on a global clock, provided that the message has not already
been retransmitted some maximum number of times. Message propagation is more robust
because each node adds its energy to the signal, much like voices in a choir. Simulcasting
is much simpler than message routing because there are no routing tables to maintain and
nodes can join the network without any installation procedure.
27
Page 28
General
Operation
Specications
Available Colors White
Brand: Insteon
FCC ID SBP22452
Industry Canada 5202A-22452
Manufacturer Product No.: 2245-222
Patent No.: Protected under US and Foreign Patents (see www.insteon.com/
patents)
UPC: 813922013498
Warranty: 2 years, limited
Audio Alert Beeper
Local Control No
Setup Memory Non-volatile EEPROM
Status LED Red/Green LED
Insteon Features
Insteon Device Category 0x03
Insteon Device Subcategory 0x33
Insteon ID 1
Insteon Links 992
Insteon Messages Repeated Yes
Insteon Minimum Receive Level 40 mV
Insteon Minimum Transmit Level 3.2 Vpp into 5 Ohms
Insteon Powerline Device Yes
Insteon Powerline Frequency 131.65 KHz
Insteon RF Device Yes
Maximum Controlled Scenes 256
Maximum Scene Memberships 992
28
Page 29
Mechanical
Multi-Link Support Yes
Multi-Unlink Support Yes
RF Beacon Yes
Radio Frequency 915 MHz
Radio Frequency Range Up to 250 feet
Beep on Button Press No
Dimensions 1.5” H x 3.75” W x 3.75” D
38mm H x 95mm W x 95mm D
Enclosure Material UV stabilized plastic
Mounting Tabletop or Wall Mount
Operating Environment Indoors
Operating Humidity Range 0-90% relative humidity
Operating Temperature Range 32º to 104º F
Factory Reset Button Yes
Storage Temperature Range -4º to 158º F
Weight 5.2 oz
Electrical
Power Consumption 2 Watts
Supply Voltage 120-277 Volts AC, 50/60 Hertz, single phase
Surge Resistance Surges over 1000 volts
Power Connector IEC C8
Certication FCC ID Part 15B & 15C
0º to 40º C
-20º to 70º C
IC RSS-210
Intertek ETL
29
Page 30
Troubleshooting
Initial Setup and Conguration
Unable to create an Insteon account
There is most likely an internet connection issue between your mobile device and the Insteon Hub
Try this:
• Make sure your internet connection is working by trying to browse a website on your mobile device
• Look for any typos in your email address that might prevent the account from creating; if you are missing
the “@” symbol or “.com,” add them. Insteon requires a full, valid email address.
Insteon App is unable to nd your Insteon Hub
A number of factors can impact the initial setup but most of them are internet connection related.
Try this:
• Check all of the cables going into the Hub and make sure they are rmly seated. Trace the ethernet cable
from the Hub back to the router and make sure it is connected properly there, too.
• Look for signs of life from the Insteon Hub. Even if not properly connected, you should see a green LED
glow on the front of the Hub. If the LED doesn’t illuminate, check the power outlet. There should also be a
blinking green and solid orange light on the Hub’s ethernet port. If both ethernet LEDs are o, try a dierent
port on your router.
• Try power cycling your Hub by unplugging and then reconnecting it to power.
• For the initial connection, your mobile device must be connected to the WiFi network being generated by
the same router to which the Hub is connected. While some routers create a “guest” network, you most
often need to be connected to the main WiFi network being created by your router for the initial setup to
work correctly.
• You can check to see if the Insteon Hub was able to properly “phone home” to Insteon. This will at least
tell you that the Hub is up and running, even if a network conguration problem is preventing you from
connecting to the Hub. On your mobile device or computer, open a browser and visit connect.insteon.com/
getinfo.asp. Any detected Insteon Hubs will be displayed on this page.
• Try a network reset (see Network Reset).
• If the problem persists, contact Insteon Support 866-243-8022
Insteon App is unable to connect to your Insteon Hub
A number of factors can impede connection to the Insteon Hub but most of them are internet connection
related.
Try this:
• Check all of the cables going into the Hub and make sure they are rmly seated. Trace the ethernet cable
from the Hub back to the router and make sure it is connected properly there, too.
• Look for signs of life from the Insteon Hub. Even if not properly connected, you should see a green LED
glow on the front of the Hub. If the LED doesn’t illuminate, check the power outlet. There should also be a
blinking green and solid orange light on the Hub’s ethernet port. If both ethernet LEDs are o, try a dierent
port on your router.
• Ensure that your home internet connection is functioning by visiting a website from your computer’s internet
browser.
• Restart your Hub by unplugging and then reconnecting it to power.
30
Page 31
Troubleshooting
General Issues
Unable to add a new device using the Insteon App
Inability to add a new device is usually centered around issues with the Insteon network.
Try this:
• Relocate the new device closer to the Insteon Hub and try again. If this works, you may need a Range
Extender or an additional Dual-Band Insteon device to increase the reach of your Insteon Network.
• Log out of the Insteon App and sign back in. From the Insteon App, navigate to Settings and tap Log Out at
the bottom of the screen.
Unable to delete a device using the Insteon App
Deleting a device from the Insteon App may encounter issues if that device is no longer present or connected in
your home.
Try this:
• Ensure that the device to be deleted is plugged in or otherwise powered. If it is a battery powered device,
press and hold the set button until the Status LED begins blinking and then try deleting from the App.
• If the device to be deleted has stopped functioning, you can force the Insteon App to delete the device but
only after attempts to delete the device are unsuccessful by the app. You will be presented with an option
to Force Remove the unresponsive device.
• Log out of the Insteon App and sign back in. From the Insteon App, navigate to Settings and tap Log Out at
the bottom of the screen.
Unable to add a new WiFi Camera using the Insteon App
There are several points to check when a WiFi Camera cannot be added using the Insteon App.
Try this:
• Ensure that your router is functioning properly and that the Ethernet cable connecting the WiFi Camera is
rmly connected to both the camera and your router.
• Conrm that the WiFi camera has power.
• Log out of the Insteon App and sign back in. From the Insteon App, navigate to Settings and tap Log Out at
the bottom of the screen.
Unable to receive alerts via email or SMS
With iOS version 1.9.25 and Android version 1.7.4, SMS alerts are no longer supported in favor of push
notications. The Insteon Connect cloud service may require updating if an alert setting was not properly saved.
Try this:
• Check your email for an email from Insteon Connect. After initially conguring alerts, a conrmation link
needs to be clicked to conrm that you wish to enable alerts for the specied email address. This email may
31
Page 32
Troubleshooting
General Issues
have been inadvertently routed to your spam folder or deleted.
• Disable and then re-enable alerts for the device that is not transmitting alerts.
• Ensure that a recipient email address is entered for the alert.
• Ensure that the Insteon for Hub app has permission to send push notications. From the home screen of
your iPhone, iPad or iPod touch, navigate to Settings. Scroll to the bottom of the list and locate Insteon.
In the “Allow Insteon to Access” section, tap Notications. Flip the switch to green to enable push
notications. You will still need to congure push notications on a per-device basis from within the Insteon
app.
Unable to disable alerts via email
The Insteon Connect cloud service may require updating if an alert setting was not properly saved.
Try this:
• Log out of the Insteon App and sign back in.
• Delete the device for which alerts cannot be disabled and then re-add the device and enable alerts.
Schedules do not appear to run at the correct time
It is possible that the Hub’s clock is incorrect and requires resetting.
Try this:
• From the Insteon App, navigate to Settings > House and check Hub Local Time. If this time is incorrect
or if the Hub Location is incorrect, tap Hub Location and locate your Insteon Hub on the map. This will
automatically update your Hub’s internal clock.
• If updating the Hub time does not correct the schedule run time, try a Network Reset.
Check for rmware updates for your Insteon Hub
Your Hub will update its rmware automatically but you can manually check for updates.
Try this:
• From the Insteon App, navigate to Settings > House and tap Check for Updates.
32
Page 33
Certications and Warnings
Read and understand these instructions before installing and retain them for future reference.
This product is not designed or approved for use on powerlines other than 120-277VAC, 50Hz or 60Hz, single
phase. Attempting to use this product on unapproved powerlines may have hazardous consequences.
• Use only indoors or in outdoor rated box
• This product may feel warm during operation. The amount of heat generated is within approved limits and
poses no hazards. To minimize heat buildup, ensure the area surrounding this product is as clear of clutter
as possible.
• Each Insteon product is assigned a unique Insteon I.D., which is printed on the product’s label.
• Changes or modications to the hardware not expressly approved by Insteon may void the user’s authority
to operate the equipment in a licensed manor.
• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
This device complies with FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorise aux deux conditions suivantes: (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est
susceptible d’en compromettre le fonctionnement.
33
Page 34
Product Warranty
Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date
of purchase, this product will be free from defects in material and workmanship and will perform in substantial
conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or
errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the
product does not perform as warranted above during the warranty period, Seller will either repair it, replace it,
or refund the purchase price, at its option, upon receipt of the product at the address below, postage prepaid,
with proof of the date of purchase and an explanation of the defect or error. The repair, replacement, or refund
that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or
replacement during the warranty period, call 866-243-8022 with the Model # and Revision # of the device to
receive an RMA# and send the product, along with all other required materials to:
Insteon
ATTN: Receiving
16542 Millikan Ave.
Irvine, CA 92606-5027
Limitations
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or
implied, including any warranty or merchantability or tness for a particular purpose. Any implied warranty,
including any warranty of merchantability or tness for a particular purpose, which may not be disclaimed
or supplanted as provided above shall be limited to the two-year of the express warranty above. No other
representation or claim of any nature by any person shall be binding upon Seller or modify the terms of the
above warranty and disclaimer.
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical
tampering. For optimal use, manually verify the device state. Any home automation device should be viewed as
a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from
possession or use of this device, including without limitation damage to property and, to the extent permitted by
law, personal injury, even if Seller knew or should have known of the possibility of such damages. Some states
do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in
which case the above limitations and/or exclusions may not apply to you. You may also have other legal rights
that may vary from state to state.
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2015 Insteon
Rev 06.22.15
34
Loading...