Page 1
INSTEON® Hub
Owner’s Manual
2242-222 (US)
2242-422 (EU)
2242-442 (UK)
2242-522 (AUS/NZ)
Page 1 of 26 Rev: 9/27/2013 4:17 PM
Page 2
About INSTEON Hub ..................................................................................................................................................... 3
Features and Benefits.................................................................................................................................................. 3
Installation ..................................................................................................................................................................... 3
Getting Started ............................................................................................................................................................. 4
Option 1: Use Hub with Smartphone/Tablet ................................................................................................................ 4
Option 2: Use Hub with INSTEON Compatible Software ............................................................................................ 4
Mount Hub on Wall (optional) ...................................................................................................................................... 5
Account Creation .......................................................................................................................................................... 6
Login ............................................................................................................................................................................ 7
Hub Set Up .................................................................................................................................................................. 8
Using INSTEON App ..................................................................................................................................................... 9
Navigation Bar ............................................................................................................................................................. 9
Device and Sensor Status Indicators ........................................................................................................................ 10
Devices ...................................................................................................................................................................... 11
Thermostat ................................................................................................................................................................. 14
Rooms ....................................................................................................................................................................... 15
Schedules .................................................................................................................................................................. 15
Scenes ....................................................................................................................................................................... 16
Troubleshooting .......................................................................................................................................................... 20
Account Troubleshooting ........................................................................................................................................... 20
Hub Setup Troubleshooting ....................................................................................................................................... 20
Scene Troubleshooting .............................................................................................................................................. 21
Network Reset ........................................................................................................................................................... 21
Factory Reset ............................................................................................................................................................ 21
Specifications .............................................................................................................................................................. 23
Certification and Warranty ......................................................................................................................................... 24
DECLARATION OF CONFORMITY .......................................................................................................................... 24
Certification (US) ....................................................................................................................................................... 25
FCC and Industry Canada Compliance Statement ................................................................................................... 25
Page 2 of 26 Rev: 9/27/2013 4:17 PM
Page 3
Ethernet
Paddle top
Status LED
Power cable
Hub
Ethernet port
Power input
Factory reset
About INSTEON Hub
INSTEON Hub makes adding customizable, fully dimmable INSTEON remote control to your lamps as easy as plug
and play. It’s home control at its simplest and most convenient.
cable
(on/brighten)
(set button)
Features and Benefits
Control your entire INSTEON network
Receive cloud-based email and/or text alerts (leak, door, etc.)
Setup scenes
Run timers
Do this all from your mobile device using a free iOS and Android Application
No monthly fees
Two-year warranty
Installation
CAUTIONS AND WARNINGS
Read and understand these instructions before installing and retain them for future reference.
This product is not designed or approved for use on powerlines other than 100-240VAC,50Hz or 60Hz, single phase. Attempting to use this
product on non-approved powerlines may have hazardous consequences.
Page 3 of 26 Rev: 9/27/2013 4:17 PM
Page 4
In the Box
Tools Needed
Accessories
INSTEON Hub
Android or iOS smartphone or tablet
INSTEON devices and sensors
Power Cord
INSTEON IP Camera
Ethernet Cord
Quick Start Guide
Hub
WiFi
router
Ethernet cable
Plugging Hub
What you’ll need
Available wall outlet
What you’ll need
What you’ll need
Getting Started
Connect Hub to router using
Then connect Hub to wall outlet (not a power strip).
directly into outlet
will result in the
greatest signal range
and reliability
only
the included Ethernet cable.
Available port on your router
Option 1: Use Hub with Smartphone/Tablet
1) Connect your smartphone/tablet to your router via WiFi
2) Download the INSTEON for Hub app
3) Launch and follow the onscreen instructions
Once your INSTEON Hub has been configured and devices added, you may also access and have control of INSTEON devices
from any browser by visiting https://connect.insteon.com
Smartphone or tablet running iOS or
Android
Option 2: Use Hub with INSTEON Compatible Software
Do not use this option if you are using or plan to use the Hub
with the INSTEON for Hub app. HouseLinc, a powerful free software
for managing INSTEON, can be downloaded from
www.insteon.com/houselinc.html
1) Install software
2) Follow software instructions for adding Hub as a computer
interface
Page 4 of 26 Rev: 9/27/2013 4:17 PM
INSTEON compatible software (Like
HouseLinc) that supports the Hub as a
computer interface
Computer connected to the router (WiFi or
Ethernet)
Page 5
Leave head screw approximately
6.35mm (.25”
mounting of Hub
+ +
Mount Hub on Wall (optional)
Simply screw two screws (we recommend using #6 drywall screws) through the marks in the drawing below (leaving head of
screw about ¼” from the wall) and hang Hub on the screws (you can then tear this sheet off).
) gap for proper
Page 5 of 26 Rev: 9/27/2013 4:17 PM
Page 6
Account Creation
Login Selection Screen
End User License Agreement
The first screen in the app when launching the application is the Login Selection
Screen. You can select between one of the following:
1) Create New Account
Select this if you do not already have an INSTEON Hub account
2) I already have an INSTEON Account
Select this if you have already created an existing INSTEON Hub
account.
After selecting “Create New Account” from the above screen you will be taken to
the End User License Agreement (EULA). After reading, tap on the text “I have
read and agreed to the license terms” to check the box (lower left corner). You will
automatically be taken to the next page.
NOTE: You will be unable to continue in the application without checking the box.
Page 6 of 26 Rev: 9/27/2013 4:17 PM
Page 7
Create Account
Below are the following fields that the user will have to complete to create the account:
Email* – the user's email address where they would like to receive alerts and
notifications from the application, cloud service or device activations; this is the
primary account email address.
SMS – stands for Short Messaging Service (also known as Text Messaging). This
is the mobile number where you would like to receive alerts from the application
(e.g., Motion detected, Garage opened, etc).
Password* – the minimum length for a password is 4 characters.
Reenter Password* – re-enter the password to verify.
* Required Fields
Create Account (cont.)
When you tap the “Create Account” button you will receive two emails. One will require you to activate the account
and the other will welcome you to the service. If you supplied an SMS number, a text message will also be sent and
require you to reply with a four digit approval code.
When you click on the link in the email, you will be taken to the http://connect.insteon.com
web page and receive a
confirmation message indicating that the account has been successfully created.
Until you approve the email and SMS, you will not be able to receive alert notifications. You will also see a
popup reminder each time you finish adding a device.
Login
For a customer to be able to login their existing account the following is required:
Email* – this is the email that the customer used to create the account
with the INSTEON Connect Cloud Service.
Password* – the password that was used for the initial account
creation.
Stay signed in – turning this on will keep you from having to enter your
credentials each time you access the app.
*Required Fields
Page 7 of 26 Rev: 9/27/2013 4:17 PM
Page 8
The static IP address you’ve assigned
The port on which the Hub will listen
Basic instructions to configure the
Call INSTEON Support if you are at all uncomfortable with
Hub Set Up
After you have successfully created an account, the mobile application will begin the
installation wizard for the Hub.
If during this process you have any problems please see Troubleshooting
Hub Setup.
Remote Access Setup
If you would like to use your INSTEON Hub when you are away from home so that you can monitor and control your
devices, you will need to configure Remote Access. This involves a process called port forwarding. A guide to
configuring port forwarding can be found under Settings > House > Port Forwarding Guide.
section for
IP Address
to the Hub. Assigning a static IP
address can be done using your router
or by specifying one here.
Port
25105
Remote Access
Guide
for inbound connections. Be sure to
forward this port using your router’s
port forwarding interface.
most popular router brands for port
forwarding.
configuring Remote Access: 1-866-243-8022
Page 8 of 26 Rev: 9/27/2013 4:17 PM
Page 9
Favorites
Rooms
Scenes
Check-In
Temperature
Settings
Using INSTEON App
Navigation Bar
Navigation bar without thermostat:
Navigation bar with thermostat:
A customizable display for any devices you wish to have at your fingertips. Add lights,
cameras, sensors and see them all in one alphabetically organized view.
Display all rooms. The default rooms include: All Devices, Check-in and Favorites.
Create more rooms to make organizing your house easy.
Access scenes you have created. Scenes are a collection of devices that respond (on,
off, 50%, etc.) to a single command.
Allows you to quickly check status of sensors (motion, open/close, leak, smoke).
See “Sensor Status Indicators” to understand the different sensor states.
If you have an INSTEON thermostat, the temperature will be displayed here. Tapping
the icon will take you directly to the thermostat control screen.
Allows you to edit the page you are on as well as access general settings.
Page 9 of 26 Rev: 9/27/2013 4:17 PM
Page 10
Spinning
Green
White
Red
Yellow
Device and Sensor Status Indicators
Getting status
Device is on
Device is off / sensor is “OK”
Sensor is activated
Status is unknown
Page 10 of 26 Rev: 9/27/2013 4:17 PM
Page 11
Tap All Devices to see every device in your home.
Devices
To control a device, click on its icon. If you have more than nine devices, use your finger to swipe to the other pages.
Tap a device icon to control that device.
Page 11 of 26 Rev: 9/27/2013 4:17 PM
Page 12
Control pop-up
Choose between turning the
On/Off control.
Tap to increment bright/dim
until released
Slide left and right to quickly
(dimming devices only)
Current status
Refresh status
device on or off. Tap + to enter
the full device control screen
for dimming and brightening.
Tap in the background area to
close the popup.
Full Device Control
Double-tapping On or Off for
dimmers will instantly turn
dimmers fully on or off
(bypassing any programmed
ramp rate and/or on level)
Press and hold to bright/dim
Page 12 of 26 Rev: 9/27/2013 4:17 PM
adjust the light brightness
Page 13
Device Settings
Name
Device name
Icon
Device icon
Room Memberships
Add to rooms, view room memberships
Scene Memberships
Add to scenes, view scene memberships
Schedule
Set a timer for the device
Receive an alert (text message/email)
Local Properties*
The level at which you would like the
Speed at which the light turns on (0.1 sec
Set the brightness of the devices local
Enable this feature if you’d like your
Local Programming
Enable this to prevent changes from
Enable this if you’d like the devices LED
* Available for most INSTEON devices shipped after March 2013. Features
To view the settings or make
settings then tap Edit This
edits to the device, tap
Alerts
On Level
Ramp Rate
LED Brightness
Beep on Button Press
Lock
Blink on INSTEON
Traffic
when the device is activated (applicable
to activation at the device only – i.e., not
via the app or through a scene)
device to turn on to when activated locally
– this could be used to help save energy
by always turning on to 90%.
to 8 minutes)
LEDs
device to beep when activated locally.
being made at the device.
to blink upon seeing traffic – helpful for
troubleshooting.
such as On Level and Ramp Rate are available for dimming devices only. Beep
on Button Press applies only to devices that have a beeper.
Page 13 of 26 Rev: 9/27/2013 4:17 PM
Page 14
Example of the On-Level and Ramp Rate adjustments:
Use the up and down arrows to adjust your
* Available for INSTEON devices shipped after March 2013
Thermostat
Thermostat Control
** Dimmable devices only
thermostat set points.
Page 14 of 26 Rev: 9/27/2013 4:17 PM
Page 15
Thermostat Edit
Name
Device name
Icon
Device icon
Room membership
Add to rooms
Enable if thermostat supports
Units
Select Fahrenheit or Celsius**
** Not currently supported for INSTEON Venstar Adapter
Humidity sensor
Rooms
Add a Room
1) Tap the Rooms button and Add
2) Give the new room a name, then tap Done
3) Select the room icon, then tap Add
4) Select a device or scene to add to room, when finished tap Done
humidity
Schedules
Devices and scenes can be activated based on time of day, day of week or by sunrise or sunset.
Note: Each device or scene can have only one timer. To create multiple timers for a device or scene, simply create a
new scene. Also, only scene may be scheduled to occur at a single point of time. We suggest either stagger your
schedules or group all of your scheduled items into a single scene.
Follow the steps below to create a schedule:
1) From the device or scene control page,
tap the settings button and select Edit
This
2) Tap Schedule
3) Tap On Time and select
Time of Day – followed by
the time
Or
Sunrise/Sunset –
Automatically uses the geo
location times for your area
(automatically configured
during Hub setup)
Page 15 of 26 Rev: 9/27/2013 4:17 PM
Page 16
Member Type
Member Response
4) Tap Done
5) Next select Off Time and select
Time of Day
Or
Sunrise/Sunset
6) Tap Done
7) Select the days that you would like the timer to run by tapping on each day. By default,
the entire week is pre-selected for you.
8) When finished tap Save to save your new schedule
Scenes
Scenes are a collection of INSTEON devices that can each turn on, off or dim when activated from either the app, a
schedule or by activation from any other controller (motion sensor, keypad, switch, etc.)
Note: some older INSTEON devices may require manually tapping of the set button during scene configuration. See
Scene Troubleshooting
Add a Scene
1) From the Scene page, tap Add
2) Give the new Scene a name, icon and room associations
3) Tap each device that you’d like to add to the scene, when finished tap the Next button.
4) The next page will display the list of your scene members broken up by room and will look something like this:
for more info.
Page 16 of 26 Rev: 9/27/2013 4:17 PM
Page 17
Controller
Responder
Responder:
Both:
Controller:
Example showing a dimmers’
5) Adjust the scene member response by tapping the green button or use the current state displayed.
on level and ramp rate
6) If you wish to also activate the scene from another INSTEON device (motion sensor, keypad, switch, etc.) tap
the blue Responder button. If the button is grayed out (either Responder or Controller), this means the device
can only be one or the other.
member will only
be activated by
the scene
member will activate
and be activated by
the scene
member will
only activate
the scene
(grayed out):
A controller-only
device (e.g.,
motion sensor)
(grayed out):
A responder-only
device (e.g., older
plug-in module)
7) When finished tap Save Scene
The app will begin linking to each scene member
If a sensor was selected, follow the onscreen instructions for adding them to the scene as a controller
8) When finished, the app will ask if you want to turn the scene members off – this may be convenient if you have
created an All Lights scene and you simply want to turn off all members.
Page 17 of 26 Rev: 9/27/2013 4:17 PM
Page 18
In the Scene view, tap a
Scene control differs from regular device control since
Tap to increment scene bright/dim
Accessing Your Scene
scene to access the control
screen
Scene Control
devices within a scene may be set to turn off when the
scene is turned on (activated). All devices within the
scene will turn off when the off button is tapped.
Double tapping the on button will turn all scene members
full-on instantly regardless of programmed scene state.
Press and hold to bright/dim until released
Edit Scene
Page 18 of 26 Rev: 9/27/2013 4:17 PM
Page 19
Scene name
Device name
Icon
Device icon
Room
Schedule
Set a timer for the scene
Displays all memberships of the scene.
Memberships
Members
Add to rooms
Tap on a device to edit the state or tap
the trash can icon to remove from the
scene.
Page 19 of 26 Rev: 9/27/2013 4:17 PM
Page 20
Schedule Schedule
To create a schedule for your scene, please refer to the Schedules section of this manual.
Troubleshooting
Account Troubleshooting
Unable to Create Account
Verify that the mobile device is connected to Wi-Fi and has an external connection to the internet, try going
to a website through the mobile device’s browser.
Verify that the email is properly formatted (example@gmail.com).
Account Already Exists
Verify that you are using the correct password; if unsure try the Forgot Password option.
Hub Setup Troubleshooting
The following is a list of the various screens that are displayed if there are any problems during the Hub Setup
Wizard. If you are unable to resolve your issue after reviewing these solutions, please send an email to
support@insteon.com or call us at 1-866-243-8022 and be sure to include your INSTEON Hub ID (located on the
bottom of the Hub) and your username.
Not Connected to Wi-Fi
o Make sure the mobile device has an external internet connection. An easy way to verify that would
be to try a common website from the mobile device’s internet browser such as www.insteon.com.
o Make sure that the mobile device is associated to a WiFi network. You may have turned off wireless
network association. Go to the settings section for your mobile device and allow the mobile device to
connect to your local WiFi.
o Make sure “Airplane Mode” is turned off for the mobile device.
o Check to make sure the router is able to make an external connection. If you have a computer on the
network, check to see if you can go to a common website through the computer’s browser.
Can’t Find Hub
o Make sure that you have properly connected the Hub to the router and that the Hub is powered.
o Make sure your mobile device is associated to the same local network that the Hub is physically
connected to. There are some home networks that have multiple SSID’s that would prevent the
application from detecting the Hub if they were on different networks.
o The proper start-up sequence for the Hub is to plug the Ethernet cable to both router and Hub THEN
apply power to the Hub.
o Verify proper LED state on the rear of the Hub. There are 2 LEDs on the rear of the Hub that are
located where the Ethernet cable is plugged in.
o Attempt to find the Hub outside of the mobile application. On a computer that is connected to the
same local network as the Hub, open an Internet browser and visist:
https://www.connect.insteon.com/getinfo.asp
Page 20 of 26 Rev: 9/27/2013 4:17 PM
Page 21
The web browser should show the Hub located at the URL above. Clicking on the IP address
should access the Hub.
NOTE: If you see multiple entries, locate the correct Hub by INSTEON ID, printed on the
underside of the Hub
o Verify that the Hub was given an IP address:
On the bottom of the Hub you will find the MAC Address for the Hub. This MAC Address
should be in the DHCP list for the router.
If there is an IP address, click the link for that IP address.
If the MAC Address is not on the list, the router may have not assigned an IP address to that
device.
Cycle Power to the Hub
Try another Ethernet cable
Try another Port on the Router
Verify the LED behavior on the Hub
Attempt a Network Reset
Scene Troubleshooting
If you set your device to go to a dimmed level for a scene but when activated it goes to 100%, you are likely using an
older INSTEON device. These devices will require an additional step during the scene setup process:
1) Go to Edit > Edit Settings > Scenes and select the scene to edit
2) Tap on the device that isn't responding to the dim level
3) Use the control panel to adjust it to the level you want for the scene
4) Go to the physical device and tap its set button (the connected light may flash)
5) Tap "Update Scene".
The scene will be updated with the older devices' scene level.
Network Reset
If you have changed your network settings and cannot connect to the Hub, try performing a Network Reset.
1) Press and hold INSTEON Hub set button until it beeps
LED will begin blinking green
2) Slowly tap the set button six times
On the first tap the Hub will double beep and the LED will turn to blue
On the fifth tap the Hub will start beeping and the LED will turn green
On the sixth tap the Hub will stop beeping and the LED will turn blue
3) Remove power from INSTEON Hub and wait about 10 seconds
4) Re-apply power to INSTEON Hub
Factory Reset
If you have already set up the Hub in the app, you must first delete your account prior to factory resetting the Hub. If
you have added any INSTEON devices to the app, it is strongly recommended that you factory reset those devices
prior to deleting your account and factory resetting the Hub.
Delete Account
1) Go to the Edit Settings page by tapping the settings button and selecting Edit Settings
2) Select Account
3) At the bottom of the page is a Delete Account button. Tap button to delete your account (this cannot be undone).
Factory Reset Hub
Page 21 of 26 Rev: 9/27/2013 4:17 PM
Page 22
1) Remove power from INSTEON Hub
2) Press and hold INSTEON Hub set button. Do not let go.
3) While continuing to press and hold the set button, re-apply power to INSTEON Hub
INSTEON Hub will begin to emit a long beep
LED will turn red
4) After beep stops, release INSTEON Hub set button
After a few seconds, INSTEON Hub will double-beep
LED will turn blue
LEDs on the Ethernet jack will flash
Page 22 of 26 Rev: 9/27/2013 4:17 PM
Page 23
General
Product name
INSTEON Hub
Brand/manufacturer
INSTEON
2242-222 US
813922012934 US
Warranty
2 years, limited
INSTEON
INSTEON powerline mesh repeater
Yes
INSTEON RF mesh repeater
Yes
INSTEON controller
Yes
INSTEON responder
Yes
Maximum links/scenes
400
Blinks red or green during setup
Blinks red to indicate traffic (must be enabled via software)
LED brightness
Adjustable, from off to bright
Commands supported as controller
All
Commands supported as responder
All
Software configurable
Yes
RF range
Up to 50 meters (150 feet) open air
Phase bridge detect beacon
Yes
2242-222 (US, 915 MHz)
0x2B
2242-422 (Europe, 869.85 MHz)
0x2E
2242-442 (UK, 869.85 MHz)
0x30
2242-522 (AUS/NZ, 921.0 MHz)
0x2F
X10
X10 address
1 optional (comes unassigned)
X10 transmitter
Yes
X10 receiver
Yes
X10 status response
N/A
X10 minimum transmit level
3.2 Vpp into 5 Ohms
Specifications
Manufacturer product number
UPC
LED
2242-422 Europe
2242-442 UK
2242-522 AUS/NZ
813922012941 Europe
813922012958 UK
813922012985 AUS/NZ
Blinks green once when all responders acknowledge (can be
disabled via software)
Blinks red once if any responder does not acknowledge
INSTEON device subcategory
Page 23 of 26 Rev: 9/27/2013 4:17 PM
Page 24
X10 minimum receive level
20mV into 5 Ohms
X10 messages repeated
No
Mechanical
Mounting
Wires
Screw clamp connections
N/A
Case color
White
Set button
1
Plastic
UV stabilized polycarbonate
Beeper
Yes
LED
1, RGB
Weight
5oz (142g)
Operating environment
Indoors
Operating temperature range
Operating humidity range
0-90% relative humidity
Storage temperature range
Electrical
Voltage
100VAC to 240VAC
Frequency
50/60Hz auto detected at power-up
Retains all settings without power
Yes, saved in non-volatile EEPROM
Standby power consumption
< 0.75 watts
Safety approved
CE, C-Tick, CTL/US
EN 300 220-2, 301 489-3
Wall Mount
N/A
Dimensions 7” H x 4” W x 1.5” D (17.8cm x 10.2cm x 3.8cm)
0o to 40o C / 32o to 104o F
Certifications
Certification and Warranty
DECLARATION OF CONFORMITY
Hereby, INSTEON declares that this device is in compliance with the essential requirements and other relevant provisions of the following Directives:
1) Low Voltage Equipment Directive 2006/95/EC
2) Electromagnetic Compatibility Directive 2004/108/EC
3) Hazardous Substance Directive 2005/95/EC
Technical data and copies of the original Declaration of Conformity are available and can be obtained from INSTEON; 16542 Millikan Ave, Irvine, CA, USA.
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE)
This document contains important information for users with regards to the proper disposal and recycling of INSTEON products. Consumers are required to comply
with this notice for all electronic products bearing the following symbol:
Page 24 of 26 Rev: 9/27/2013 4:17 PM
-20o to 70o C / -4o to 158o F
AS/NZS 4268, CISPR 22
IEC 60669-2-1
FCC / IC
Page 25
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal
waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased
the product.
DECLARATION OF CONFORMITY TO R&TTE DIRECTIVE 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein
Product category: general consumer (category 3).
English: This equipment is in compliance with the essential requirements and other relevant provisions of the European R&TTE Directive 1999/5/EC
Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
Nederlands [Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.
Svenska [Swedish]: Denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår
av direktiv 1999/5/EG.
Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC
Español [Spanish]: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.
Português [Portuguese]: Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva
1999/5/EC.
Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.
Norsk [Norwegian]: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.
Suomi [Finnish]:Tämä laite tÿttää direktiivin 1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen.
Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.
In 2002, the European Union introduced the Directive on Waste Electrical and Electronic Equipment (WEEE). The main aim of the Directive is to ensure that W EEE is
collected and treated separately. WEEE may contain hazardous substances that should not end-up in the (human) environment because it can have adverse effects on
it.Furthermore, WEEE is a vast source of raw materials. With the ever-rising worldwide demand for new equipment and the ever-decreasing volume of raw materials in
nature, letting this potential source of such materials go to waste is unacceptable. If equipment is collected separately, the equipment can be recycled and up to 85 to
90% of the equipment can be reused as new material, saving the use of virgin raw materials and energy of producing these. Separate collection and treatment of
WEEE will thus decrease CO2 emissions as well. For the above reasons, INSTEON expects end-users to dispose of the material in an environmentally friendly way
through separate collection and treatment. Electrical and Electronic Equipment is labeled with the following 'crossed out wheeled bin' symbol indicating that the
equipment should be disposed of, by the end-user, separate from other types of waste. End-users should contact their dealer/distributor or our company on disposal,
collection and recycling options in their country.
Certification (US)
This product has been thoroughly tested by Intertek ETL, a nationally recognized independent third-party testing laboratory. The North American ETL Listed mark signifies that the
device has been tested to and has met the requirements of a widely recognized consensus of U.S. and Canadian device safety standards, that the manufacturing site has been
audited, and that the manufacturer has agreed to a program of quarterly factory follow-up inspections to verify continued conformance.
FCC and Industry Canada Compliance Statement
This device complies with FCC Rules Part 15 and Industry Canada RSS-210 Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
The digital circuitry of this device has been tested and found to comply with the li mits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radi o and televisi on reception. However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause such interference, w hich can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one
or more of the following measures:
- Re-orient or relocate the receiving antenna of the device experiencing the interference
- Increase the distance between this device and the receiver
- Connect the device to an AC outlet on a circuit different from the one that supplies power to the receiver
- Consult the dealer or an experienced radio/TV technician
WARNING: Changes or modifications to this device not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Limited Warranty
Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free from defects in
material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or
errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the product does not perform as warranted above during the
warranty period, Seller will either repair it, replace it, or refund the purchase price, at its option, upon receipt of the product at the address below, postage prepaid, with
proof of the date of purchase and an explanation of the defect or error. The repair, replacement, or refund that is provided for above shall be the full extent of Seller’s
liability with respect to this product. For repair or replacement during the warranty period, call 866-243-8022 with the Model # and Revision # of the device to receive an
RMA# and send the product, along with all other required materials to:
INSTEON
ATTN: Receiving
16542 Millikan Ave.
Irvine, CA 92606-5027
Limitations
The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or implied, including any warranty or merchantability or fitness
for a particular purpose. Any implied warranty, including any warranty of merchantability or fitness for a particular purpose, which may not be disclaimed or supplanted
as provided above shall be limited to the two-year of the express warranty above. No other representation or claim of any nature by any person shall be binding upon
Seller or modify the terms of the above warranty and disclaimer.
Page 25 of 26 Rev: 9/27/2013 4:17 PM
Page 26
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical tampering. For optimal use, manually verify the device
state. Any home automation device should be viewed as a convenience, but not as a sole method for controlling your home.
In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from possession or use of this device, including without limitation
damage to property and, to the extent permitted by law, personal injury, even if Seller knew or should have known of the possibility of such damages. Some states do
not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which case the above limitations and/or exclusions may not
apply to you. You may also have other legal rights that may vary from state to state.
Protected under U.S. and foreign patents (see www.insteon.com/patents)
© Copyright 2013 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 866-243-8022, www.insteon.com
Page 26 of 26 Rev: 9/27/2013 4:17 PM
Loading...