Instek SPD-3606 Data Sheet

POWER SUPPLIES
D27
375W DUAL RANGE D.C. POWER SUPPLY
High Economic value D.C. Power Supply SPD-3606 DC power supply provides 375W capability, three
W
SPD-3606
NE
FEATURES
* Three Independent, Isolated Output
* CH1/CH2 : Dual Range Output of 30V/6A or
60V/3A to Cover Wide Application
* Ch3 Adjustable Output : 0.1~5V/3A
* High Efficiency Power Conversion (Up to 25%
Then Traditional Power Supply)
* Remote Control Output On/Off
* OVP to Protect the DUT
* OTP to Protect SPD-3606 and Reduce the
Repair Rate
* Automatically Switching AC 115V/230V Source
* Fully Safety Design: Reverse Polarity, CH3
Overload Protection, Safe Output Setting , CC/CV Mode
* High Power Density: Compact Size, Light Weight
* Low Fan Acoustic Noise with Fan Speed
Control Circuit
* Voltage/Current protection Knob(Option)
SPD-3606 weigh less than half and occupy much less space than equal power rating linear power supply, which is used to be quite heavy and bulky. Thorough Design of Protection, To avoid the damage caused by improper operation to SPD-3606 and DUT, SPD-3606 provides numerous protection features such as reverse polarity protection, OVP (Over Voltage Protection) and OTP (Over Temperature Protection). In case the wrong AC Power is connected, SPD-3606 automatically selects can cope with it by switching 115V/230V source internally. Manual or Remote Output on/Off Control, SPD-3606 provides Output on/off function. User can preset the voltage/current value and check the connection between DUT and power supply is ready. Then users could control output on/off by manual switching or by remote connection. SPD-3606 also provides volume guard function. It is an optional item which replaces the regular Voltage/Current knobs to prevent accidentally changing the output level. It is useful for automated testing at fixed output level, such as assembly line inspection.
SPECIFICATIONS
OUTPUT RATINGS CH1/CH2 Independent
CH1/CH2 Series CH1/CH2 Parallel
CH3 VOLTAGE REGULATION Line Load
Ripple & Noise Recovery Time
CURRENT REGULATION Line Load Ripple & Noise TRACKING OPERATION
Tracking Error Series Regulation Ripple & Noise
OUTPUT ON/OFF RESPONSE TIME Voltage Up (10% ~ 90%)
Voltage Down (90% ~ 10%) OVP
Accuracy METER Type
Accuracy Resolution INSULATION Chassis & Terminal
Chassis & AC code TEMPERATURE COEFFICIENT Voltage Current
REMOTE CONTROL
Output On/Off
FAN NOISE
50dB
OPERATION ENVIRONMENT
Ambient temperature 0 ~ 40 C
STORAGE ENVIRONMENT
Ambient temperature -10 ~ 70 C
POWER SOURCE
AC 115V/230V 15%, 50/60Hz
DIMENSIONS & WEIGHT
255 (W) x 145 (H) x 265 (D) mm ; Approx. 6kg
0 ~ 30V / 0 ~ 6A ; 0 ~ 60V / 0 ~ 3A 0 ~ 60V / 0 ~ 6A ; 0 ~ 120V / 0 ~ 3A
0 ~ 30V / 0 ~ 12A ; 0 ~ 60V / 0 ~ 6A
0.1 ~ 5V / 3A
0.01% + 3mV
0.01% + 5mV (rating current 6A)
0.01% + 8mV (rating current 12A) 5mVrms (5Hz ~ 1MHz ); 100 s(50% load change, minimum load 0.5A)
0.2% + 3mA
0.2% + 3mA 3mArms
0.5% + 10mV of master 300mV 10mVrms (5Hz ~ 1MHz) ;
100ms ( 95% rating load) 100ms ( 10% rating load)
(0.5% of reading + 0.5V)
3 digits 0.5" LED display
(0.5% of reading + 2 digits)
100mV/10mA
100M or above (DC 1000V) 100M or above (DC 1000V)
100ppm/ C + 3mV 150ppm/ C + 3mA
; Relative humidity 80%
; Relative humidity 70%
50mVpp (20Hz ~ 20MHz)
100mVpp (20Hz ~ 20MHz)
SPD-3606
ORDERING INFORMATION
SPD-3606
ACCESSORIES : User manual x 1, Power code x 1, Test lead GTL-104 x 2, GTL-105 x 1
Optional Accessories
GPS-001
375W Dual Range D.C. Power Supply
Voltage/Current protection Knob
ORDERING INFORMATION
Rear Panel
GPS-001
Voltage/Current protection Knob
Made to Measure. Good Will Instrument Co., Ltd.
POWER SUPPLIES
D28
Loading...