Programmable Switching D.C. Power Supply
PSH-Series
OUTPUT
REGULATION ( CV )
REGULATION ( CC )
RIPPLE & NOISE Voltage (mVrms)
RESOLUTION
PROGRAM ACCURACY
READBACK ( Meter )
RESOLUTION
READBACK ( Meter )
ACCURACY
READBACK TEMP. COEFFICIENT
RESPONSE ( Rise/Fall )
TIME
RECOVERY TIME ( 50% Step
Load Change From 25%~75% )
PROTECTION OVP/OCP/OTP
OUTPUT ON/OFF CONTROL
INTERFACE
POWER SOURCE
ACCESSORY
DIMENSIONS & WEIGHT
10V
20V
36V
60V
Load
Line
Load
Line
Voltage (mVp-p)
Current (mArms)
Voltage
Current
Voltage
Current
Voltage As Resolution As Resolution As Resolution
Current
Voltage As Program Accuracy As Program Accuracy As Program Accuracy
Current
Voltage (25 5 )
Voltage Up(10%~90%)
Voltage Down(90%~10%)
CV Mode
Rush Current
Standard : RS-232C; Option : GPIB (IEEE-488.2)...Unable to be installed simultaneously
AC90V~250V, 50/60Hz
Instruction manual x 1
SPECIFICATIONS
36A(PSH-1036)
18A(PSH-2018) 35A(PSH-2035) 50A(PSH-2050)
10A(PSH-3610) 20A(PSH-3620) 30A(PSH-3630)
6A(PSH-6006)
0.1%+5mV 0.1 +5mV% 0.1 +5mV%
0.05 +5mV% 0.05 +5mV% 0.05 +5mV%
0.2%+5mA 0.2 +10mA% 0.2 +15mA%
0.2 +5mA% 0.2 +10mA% 0.2 +15mA%
10mVrms 10mVrms 10mVrms
100mVp-p 20Hz~20MHz
0.2% 0.2%+20mA 0.2%+40mA
36V 10mV
>36V 20mV
10V
20V
36V
60V
36V
>36V
10V
20V
36V
60V
10mA 20mA 30mA
10mA 10mA 20mA
10mA 10mA 10mA
10mA 10mA 10mA
0.05%+25mV 0.05%+25mV 0.05%+25mV
0.05%+50mV 0.05%+50mV 0.05%+50mV
0.2%+30mA 0.2 +60mA% 0.2 +90mA%
0.2%+30mA 0.2 +30mA% 0.2 +60mA%
0.2%+30mA 0.2 +30mA% 0.2 +30mA%
0.2%+30mA 0.2 +30mA% 0.2 +30mA%
As Resolution As Resolution As Resolution
As Program Accuracy As Program Accuracy As Program Accuracy
100ppm/ C 100ppm/ C 100ppm/ C
150mS( 95% rating load)
150mS( 10% rating load)
2mS 2mS 2mS
108(W)x141(H)x388(D)mm 188(W)x141(H)x388(D)mm 268(W)x141(H)x388(D)mm
Approx. 3.3kg Approx. 6.2kg Approx. 9.3kg
FEATURES
* Wide Input Voltage Range and High Power Factor (P.F)
* High Efficiency and High Power Density
* Constant Voltage and Constant Current Operation
* Over Voltage Over Current and Over Temperature Protection
* Self-Test and Software Calibration
* Output ON/OFF Control
* Low Ripple and Noise
* LCD Display
* Built-in Buzzer Alarm
* Standard Interface : RS-232C
* Option : GPIB ( IEEE-488.2 )
* Labview Driver
70A(PSH-1070)
12A(PSH-6012)
100mVp-p 20Hz~20MHz
10mV
20mV
150mS( 95% rating load)
150mS( 10% rating load)
100A(PSH-10100)
18A(PSH-6018)
100mVp-p 20Hz~20MHz
10mV
20mV
150mS( 95% rating load)
150mS( 10% rating load)
C18
ORDERING INFORMATION
PSH-1036
PSH-1070
PSH-10100
PSH-2018
PSH-2035
PSH-2050
PSH-3610
360W Programmable Switching D.C. Power Supply
700W Programmable Switching D.C. Power Supply
1000W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
700W Programmable Switching D.C. Power Supply
1000W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
PSH-3620
PSH-3630
PSH-6006
PSH-6012
PSH-6018
Option
Opt. 01: GPIB Interface ( Factory Installed)
720W Programmable Switching D.C. Power Supply
1080W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
720W Programmable Switching D.C. Power Supply
1080W Programmable Switching D.C. Power Supply
NOTE : When Opt.01 GPIB interface is ordered, the standard interface RS-232C will be deleted.
Loading...