Oscilloscope
Oscilloscope
* 50MHz, Dual Channel * 50MHz, Dual Channel* Z axis input
* Delayed Sweep
* Built-in Delay Line
* TV Synchronization
CRT
VERTICAL
SYSTEM
HORIZONTAL
SYSTEM
TRIGGER
X-Y OPERATION
OUTPUT SIGNAL
POWER SOURCE
ACCESSORIES
DIMENSIONS & WEIGHT
Type
Phospher
Accelerating Potential
Illumination
Z-axis Input
Sensitivity
Bandwidth
Rise Time
Signal Delay
Input Impedance
Input Coupling
Vertical Mode
A(main) Sweep Time
B(delay) Sweep Time
Delay Time
Delay Time Jitter
Trigger Mode AUTO, NORM, SINGLE
Trigger Source
Trigger Coupling
Trigger Slope
Sensitivity
X-axis Bandwidth
Phase Error
Trigger Signal Output
Calibrator Output
* ALT Triggering Function
* Hold Off Function
* Trigger level lock function
* CH1 output
100ns ~ 50ms/DIV 5% (x 10 MAG),
0.1 s ~ 0.5ms/DIV 3%
100ns ~ 50 s/DIV 5% (x 10 MAG),
* TV Synchronization
* Z axis input
* ALT Triggering Function
6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers.
8 x 10 DIV (1DIV=1cm)
P31
12kV
Continuously adjustable
Input Impedance:
Sensitivity:
Bandwidth:
5mV/DIV ~ 5V/DIV 3%,1mV ~ 2mV/DIV 5%
DC ~ 50MHz
DC ~ 15MHz at 1 ~ 2mV/DIV
7ns (23.3ns for 1 ~ 2mV/DIV)
leading edge can be monitored(GOS-653G only)
Approx. 1M
AC, DC, GND
CH1, CH2, DUAL, ADD, CH2 INV
(Dual automatic switching ALT and CHOP)
m
0.1 s ~ 0.5s/DIV 3%
(GOS-653G only)
m
m
1 s ~ 5ms, 5% (GOS-653G only)
Better than 1:10000 (GOS-653G only)
CH1, CH2, ALT, LINE, EXT
AC, DC, HF REJ, TV
,,
,,
+ or 5mV ~ 5V/DIV 4%
DC ~ 2MHz
3 or less from DC ~ 100kHz (GOS-653G)
3 or less from DC ~ 50kHz (GOS-652G)
Voltage: approx. 50mV/DIV into 50
1kHz Squarewave, 2Vp-p 2%
AC 100V/120V/220V/230V 10%, 50Hz/60Hz
310(W) x 150(H) x 455(D) mm;
,,
,,
Approx. 5k
Above 3Vp-p
DC ~ 5MHz
W
_
+
_
+
_
+
_
+
m
_
+
_
+
W
_
+
10ns ~ 50ns 8% (x 10 MAG)
10ns ~ 50ns/DIV 8% (x 10 MAG)
_
+
W
_
+
Approx. 8.2kg
_
+
GLF-190C Probes (10:1/1:1) x 2Power cord x 1, Instruction manual x 1,
* Hold Off Function
* Trigger level lock function
* CH1 output
_
+
_
+
B10
Loading...