Instanta WA2N, WA5N, WA10N Installation And User Instructions Manual

The Professional’s Choice

WA Economy Range Models:
WA2N WA5N & WA10N

Auto-Fill, Wall-mount

Catering Water Boilers

Installation And User Instructions

CONTENTS

CONTENTS & INTRODUCTION 2

SAFETY INFORMATION 3

ENVIRONMENTAL INFORMATION & DELIVERY CHECKLIST 3

TECHNICAL SPECIFICATION 4

INSTALLATION 4 - 5

OPERATION 6

DAILY USE 6

CLEANING 6

MAINTENANCE, SPARES & SERVICE INFORMATION 6 - 7

SERVICE/TECHNICAL SUPPORT/GUARANTEE 7

SERVICE WARNINGS & FAULT DIAGNOSTICS 7 - 8

Introduction

Dear Customer,

Congratulations on the purchase of your
Instanta machine.

Your new water boiler is designed to give you
years of trouble-free service provided that the
instructions contained in this manual are followed.

All new series Instanta products are energy
effi cient, simple to operate and easy to service.
Find out more about Instanta products at

www.instanta.com

Safety Information

Please read the following carefully
before switching on this appliance.

A competent installation engineer should install
this appliance in accordance with the installation
instructions for this appliance and all relevant local
and national standards including the following:

• Health and Safety at Works Act

• IEE regulations

• Local and national building regulations

• BS Codes of practice

• Water supply regulations

Your new water boiler is designed to provide
a constant source of near boiling water for the
preparation of hot drinks.

Caution Safety: All personnel must be provided
with suffi cient and appropriate training in the safe
use of this appliance.

• In line with Health and Safety requirements we
recommend that a risk assessment be carried
out after the boiler has been installed.

• A warning notice displayed next to the machine
is often helpful in notifying users that the
appliance contains and dispenses near boiling
water.

• Inform users that certain surfaces will become

hot (especially the draw off tap). Care should
be taken to avoid potential injury from burns and
scalding whilst operating this appliance.

• The unit must be earthed

• Always disconnect the unit from the power

supply before servicing

• Keep these instructions in a safe place for future

reference

Environmental Information

(Information on Disposal for Users of Waste
Electrical & Electronic Equipment)

The “crossed out wheelie bin” symbol on this product
means that discarded electrical and electronic
products should not be mixed with general waste.
Disposing of the product correctly will help to save
valuable resources and prevent any potential negative
effects on human health and the environment
which could otherwise arise from inappropriate
waste handling. For proper treatment, recovery and
recycling of end-of-life products, please contact
your dealer or supplier for further information, or
local authority for details of your nearest designated
collection point.

Checklist

Before starting installation, check that you have the
following parts;

1. Boiler Unit

2. Tap Kit

3. Paper mounting template

4. Fitting kit (screws & wall-plugs etc.)

5. Instruction Booklet

2 3