Instanta 1501F, 3001F Installation And User Instructions Manual

SF Range Models: 1501F & 3001F

Auto-Fill Catering Water Boiler
With Integrated Multi-Filter

Installation And User Instructions

INSTANTA LIMITED
Canning Road, Southport, Merseyside, PR9 7SN
Tel: [phone] Fax: [phone]
IB31 - ISS: 01

The Professional’s Choice

CONTENTS

CONTENTS & INTRODUCTION 2

SAFETY INFORMATION 2

ENVIRONMENTAL INFORMATION & DELIVERY CHECK-LIST 3

TECHNICAL SPECIFICATION 3

INSTALLATION 3

OPERATION 4

DAILY USE 4

FILTER & FILTER REPLACEMENT 4

ADJUSTING FILTER-MONITOR (optional) 6

CLEANING 6

MAINTENANCE, SPARES & SERVICE INFORMATION 7

SERVICE / TECHNICAL SUPPORT / GUARANTEE 7

SERVICE WARNINGS & FAULT DIAGNOSTICS 8

Introduction

Dear Customer,

Thank you for purchasing this Instanta product.

Your new water boiler is designed to give you
years of trouble-free service provided that
the instructions contained in this manual are
followed.

All new series Instanta products are energy

efcient, simple to operate and easy to service.

Find out more about Instanta products at www.
instanta.com

Safety Information

Please read the following carefully before
starting work on this equipment.

A competent person should install this appliance
in accordance with the installation instructions
for this appliance and all relevant local and
national standards including the following:

• Health & Safety at Work Act

• IEE Regulations

• Local & national Building Regulations

• BS Codes of practice

• Water Supply Regulations

All personnel should be provided with sufcient

training in the safe use of this appliance. A
warning notice displayed next to the machine is
often helpful in notifying users that the appliance
contains and dispenses near boiling water.

• Inform users that certain surfaces will
become hot (especially the draw-off tap).
Care should be taken to avoid potential
injury from burns and scalding whilst
operating this appliance.

• In line with Health and Safety requirements
we recommend a risk assessment be carried
out after the boiler has been installed.

• Always disconnect the unit from the power
supply before servicing.

• The unit must be earthed.

• Keep these instructions in a safe place near

the unit for future reference.

2

Environmental (Information
On Disposal For Users Of
Waste Electrical & Electronic
Equipment)

The “crossed out wheelie bin” symbol on
this product means that discarded electrical
and electronic products should not be mixed
with general waste. Disposing of the product
correctly will help to save valuable resources
and prevent any potential negative effects
on human health and the environment which
could otherwise arise from inappropriate waste
handling. For proper treatment, recovery and
recycling of end-of-life products, please contact
your dealer or supplier for further information,
or local authority for details of your nearest
designated collection point.

Delivery Checklist

Before starting installation, check that you have
the following parts;

• Catering Water Boiler

• Drip-tray

• Drip-tray tting kit

• White water inlet hose (3/4”BSP connection)

• User instructions

Technical Specification

Model 1501F 3001F

Width mm 252 308

Depth mm 362 362

Height mm 610 618

Power Rating KW 3.0 3.0

Weight (Empty) KG 13.5 15.5

Weight (Full) KG 28 36

Water Inlet Pressure: Bar 2 to 7 2 to 7

Installation

The boiler must be installed on a horizontal work

surface with sufcient strength to support its

weight.

Locate in an area where there is adequate space
to use the boiler safely (e.g. free from risk of
congestion and tripping hazards).

Connection to Mains Water Supply:

Connect the WRAS approved water lling hose

(3/4”BSP) to the inlet connection point on the
back of the boiler and the other end to the mains
water supply, via an accessible isolating tap with
a ¾”BSP thread.

IMPORTANT: If micro-bore pipe is used instead
of the inlet hose supplied, the size must be
minimum OD 3/8”(10mm).

The water supply must have a pressure not
exceeding 7bar (96psi), and no lower than 2bar
(20psi) NOTE: If your water pressure exceeds

7bar, t a suitable pressure reduction valve.

We regret that Instanta cannot be held
responsible for any machine malfunctions if
the water pressure exceeds that stated. If in
doubt, consult your water supply company.

Electrical Connection:

The boiler must be Earthed.

Your machine is supplied with a standard 13amp
bonded plug with a 13amp fuse.

Overflow:

The drip-tray has a limited capacity and is
designed to handle small spillages and drips.
Wherever possible, we strongly recommend
that it is connected to a permanent waste outlet

using the tting kit provided.

If preferred, and as an alternative, the overow

can be connected from the back of the

machine using an optional rear-overow kit

(Pt. No: ROFK1) available from Instanta Spares
Department (01704 502905).

IMPORTANT: Whichever overow connection is

chosen, the diameter of the pipe used must be
no less than 15mm.

Whilst every reasonable precaution is taken
to prevent an overflow, Instanta cannot be
held responsible for any damage caused as a
result of incorrect installation or blockage of
the overflow or failure to direct the overflow
to a safe outlet.

3