Instanta 1500 User Instruction Manual

1500

Automatic-Fill Water Boiler

USER INSTRUCTION

MANUAL

1.0 - INTRODUCTION

Your new Water Boiler is designed to give years of trouble-free service provided that the
instructions contained in this manual are followed.

All new series Instanta products are energy efficient, simple to operate and easy to service.

2.0 - WARNINGS & PRECAUTIONS

Please read the following carefully before starting work on this equipment.

A competent installation engineer should install this appliance in accordance with the
installation instructions for this appliance and all relevant local and national standards
including the following:

. Health and Safety at Works Act
. IEE regulations
. Local and national building regulations
. BS Codes of practice
. Water supply regulations

All personnel must be provided with sufficient and appropriate training in the safe use of this
appliance.

In line with Health and Safety requirements we recommend that a risk assessment be carried
out after the boiler has been installed.

A warning notice displayed next to the machine is often helpful in notifying users that the
appliance contains and dispenses near boiling water.

During normal use of the boiler, certain surfaces will become hot (especially the draw off
tap(s)). Care should be taken to avoid potential injury from burns and scalding whilst
operating this appliance.

Scale formation within the hot water appliances can be problematic in hard water areas.
Damage to the appliance caused by excessive scale build up may invalidate the warranty. See
notes on de-scaling.

Drawings, parts lists, circuit/wiring diagrams are the sole property of Instanta Limited and
must not be reproduced with consent.

3.0 - CHECK LIST

Before starting installation check that you have the following parts:

1. Drip Tray

2. Drip tray drain-kit

3. Food-quality flexible hose (3/4”bsp)

4. Instruction booklet