IN 1823 Indoor exercise bike Signa
Manual - EN
SAFETY GUIDELINE
1. Once assemble fully, please inspect to make sure all hardware parts such as bolts, nuts and washers
are positioned and in stability situation.
2. Always inspect the safety chain guard that protects the moving parts of the bike to be in safe and in
good order.
3. Always inspect the seat post, seat slider, pedals and handlebar to make sure they are in safe and
stability situation before using the bike.
4. To lubricate all moving parts monthly is recommended.
5. Do not wear loose clothing to avoid entangling into any moving parts.
6. Do not remove feet from the pedals while they are in motion.
7. Running or aerobic shoes are required when using the bike.
8. Dry the bike after each use to remove sweat and moisture. Wipe your Hope bike regularly with a mild,
non-abrasive cleaner and water solution. To avoid damaging the finish on the bike, never use a
petroleum-based solvent when cleaning.
9. Please keep children away from the bike while it is in use. Do not allow children to use the bike. This
bike is designed for adults, not children.
10. Do not dismount the bike until the pedals are at a completely STOP.
11. If you have any pain or tightness in your chest, an irregular heartbeat, shortness of breath, feel faint
or have any discomfort while you exercise, STOP!
12. Do not place fingers or any other objects into moving parts of the exercise equipment.
13. Before starting any exercise program, consult with your physician first. He or she can help establish
the exercise frequency, time and intensity appropriate for your particular age and condition.
14. After exercising, please turn the adjustment control knob clockwise (+) to increase tension so the
pedals will not rotate freely and possibly hurt someone.
15. The bike is limited 120KG, please use within the weight regulated, do not overload.
16. Class - HC (according to EN ISO 20957) for home use.
UNIT GENERAL KNOWLEDGE
The unit belongs to Aerobic Exercise equipment. Its main objective is to increase oxygen inhaled and
blood recycling, to make your heart (blood cycling system) and lung (breath system) be effective stimulus
fully through exercise for a long time (stamina exercise) so that all body tissues and organs can be given a
good supply of oxygen and nutrition to maintain optimal functional status and achieve the purpose of
fitness finally.
The unit is designed according to the drive theory of bicycle; friction theory is adopted the resistance.
Adjust the resistance by turning the Adjusting Knob, and brake by the Brake Handle. The equipment is
safe and reliable during exercise. It is suitable for using at home, in office or other small places of leisure
fitness.
Notice：
1. Make sure the equipment is stably before starting exercise. It can be leveled to compensate for uneven
surfaces through raising or lowering the four leveling bolts (16).
2. Adjust Seat (22) to a suitable position by adjusting Seat Sliders（3）and Seat Post (2). And please
adjust height of Handlebar (4) according to your body size.
3. Set right resistance by Tension Knob (11), please set a right resistance according to your body
condition. You may do exercise three times every week, about one hour every time. The best working
effect is HBF as 110-150 times/min.
4. The drive mode of the equipment is bi-directive drive. Please press Brake Handle (9) for braking
when aggressive exercise is performed, it will stop immediately.
5. Do not leave Seat (22) until all parts come to a stop completely.
EXPLODED DRAWING
Part list
Part No.
Series No.
DESCRIPTION
SPECIFICATION
QTY
1
HP-SP0708PK-01-00A
Main Frame
1 2 0708-03-06A
Seat Post
□38*460*t1.5
1 3 HP-SP0708-03-03A
Seat Slider
□38*270*t1.5
1 4 0708-05-10A
Handlebar Post
□38*270*1.5T
1 5 HP-SP0709-05-00A
Handlebar
Ø28*998*t1.5
1 6 HP-SP0708PK-06-09A
Tension Bracket
1 7 HP-SP0708-04-04A
Rear Base
Flat Oval
30*70*1.5T*498L
1 8 HP-SP0708-04-00A
Front Base
Flat Oval
30*70*1.5T*498L
1 9 SP0708PKS-09-00A
Brake-handle
1 10
HP-SP0708-02-03A
Washer
Ø10xØ25xT5
1
11
HP-SP0708PKS-10-01A
Tension Knob
M10*P1.25*60
1
12
HP-SP0708-07-01A
Cover (right)
1
13
HP-SP0708-07-02A
Cover (left)
1
14
HP-SP-0708PK-07-03A
Chain Cover A
1
15
HP-SP-0708PK-07-04A
Chain Cover B
1
16
Adjustable latch
M10
4
17
HP-SP0708-07-07A
Plastic
Sheath-inner
Pipe
Suitable for
45*45*1.5 Square
Tube & 38x38
Square Tube
3
18
HP-SP0708-07-08A
Cap of Bases
30*70*1.5 Elliptical
Tube
4
19
Cap of Seat
Slider
Suitable for
38*38*1.5T Square
Tube
1
20
HP-SP0708PKS-10-09A
PS Front Cover
For Belt
Transmission
System
1
21
Transport Wheel
D8*D71.5*W223
2
22
Seat
1
23
HP-SP0708-07-10A
Pop Pin
M16*P1.5*35L
3
24
HP-SP0708-07-11A
Φ21 Mat
1
25
Cap of Inner
Pipe
45*45*1.5T Square
Tube
1
26
Hexagonal
hollow bolt
Φ8*M6*30
3
27
Flat washer
Φ12*Φ25*1.5T
1
28
Belt
5PK54"
1
29
HP-SP0708PKS-11-01A
Tension Spring
Ø2.5*17 Ring
1
30
HP-SP0708PK- 06-06A
Spline Shaft
1
31
Right & Left
Crank
170 9/16"-20UNF
1set
32
Crank Cover
2 33
Flat Washer
Φ20*Φ10*1.5
6
34
Inner Hexagon
Flat Round Head
Screw
M10x25
6
35
Right & Left
Pedal
9/16"-20UNF-RH
1
36
Flywheel
1
37
HP-SP0708PK-06-02A
Flywheel
Spindle
M12*P1.0*166
1
38
HP-SP0708PKS-11-06A
Belt
Wheel
Ø205*19.8W
1
39
HP-SP0708PK- 06-04A
Sleeve
Ø18*Ø12*36L
1
40
HP-SP0810-2PJ-03-07A
Pulley, Flywheel
(front drive)
φ37*φ30*24.5
1
41
HP-SP-0708-06-13A
Clamp Brake
Assembly
Brake Pad and
Brake String
1
42
HP-SP0708PKS-11-08A
Clamp Brake
Holder
T4.0*M10*P1.25
1
43
HP-SP0708-02-04A
Flat Washer
Ø10.2-Ø25*T1.5
1
44
6001
6001（黑色塑胶
壳）ABEC-5
2
45
6004
6004（黑色塑胶
壳）ABEC-5
2
46
608
608
4
47
C-shape Axes
Snap Spring
Φ10
1
48
C-shape Axes
Snap Spring
Φ20 2 49
Nut
Φ4.8*T0.8
1
50
Tapping tcrew
ST4.8*15
17
51
Hexagon Flange
Nut
M12x1.0
1
52
Cap Nut M12
M12*p1.0
1
53
Hexagon Flange
Nut
M10*P1.25
2
54
Phillips-head
screws
M5*12L
2
55
Hexagon Thin
Nut M12
M12*1.0
3
56
Hexagon Flange
Nut
M6 1 57
Nylon Nut
M10
1
58
Nylon Nut
M10*P1.25
1
59
Plochá podložka
GB/T97.2 10
Φ10*1.5
6
60
Flat Washer
GBT97.2 5
Φ5.2*1.0
4
61
Hexagon Nut
M10 4 62
Brake cable
2
63
Inner Hexagon
Flat Round Bolt
M6x12
M6x12
3
64
Inner Hexagon
Flat Round Bolt
M10x25
M10x25
1
65
Inner Hexagon
Flat Round Bolt
M10x16
M10x16
4
66
Inner Hexagon
Flat Round Bolt
M6x40
M6x40
1
67
Mounting the
brake clamp
1
68
Brake pad
2 69
Pedal case
2 70
Pedal buckle
2 71
Water bottle
1
72
Holder water
bottles
1
73
Phillips head
screws
M5x12L
2
74
Meter
1 75
Control panel
3T
1
76
Phillips head
screws
M6x10L
2
77
Phillips head
screws
M5x8L
2
INSTALATION:
Steps of Installation:
Step 1：Assemble Front Base and Rear Base
According to the following figure, fix the Front Base (8) and Rear Base (7) to the Main Frame (1)
respectively with 4pcs of Hexagonal hollow bolt M10*25L(34)，Flat Washerφ20*φ10*1.5T (33)
by Opening Wrench #17 for fastening.
Step 2：Assemble Water Bottle Holder and Water Bottle.
Please refer to the following figure, fix the Water Bottle Holder (72) to Main Frame (1) via using some
tools, and put the Water Bottle (71) into the Water Bottle Holder (72).
Step 3：Install Left Pedal and Right one.
Refer to the figure as below, insert the Left Pedal and Right One (35) into the Crank (31). Furthermore,
fix them to the Main Frame (1) with Opening Wrench #15.
Step 4：Assemble the Handlebar Post.
According the following figure, slacken the Pop Pin (23), and slide the Handlebar Post (4) into the
Handlebar Post Housing on the Main Frame (1), and re-tighten the Pop Pin (23).
Step 5：Assemble the Handlebar.
Fix the Handlebar (5) to the Handlebar Post and tighten it with Flat WasherΦ10 (33) and Hexagon Flat
Round Head Screw M10*25L (34).
Step 6：Assemble the Seat Post
Slacken the Pop Pin (23)，and slide the Seat Post (2) to the Seat Post Housing on the Main Frame, then
retighten the Pop Pin (23).
Step 7：Assemble the Seat.
Slacken the Pop Pin (23) and slide the Seat Slider (3) into the Seat Post (2), then re-tighten the Pop
Pin (23) and fix the Seat (22) to the Seat Slider (3).
Step 8：Fix Meter Board and Meter.
According to the figure as below, firstly, install the control panel (75) to the Handlebar (5) with Phillips
screw (76), and then, fix meter (74) onto control panel (75) with Phillips screw (77) by Opening Wrench.
Connect the Speed string to Meter finally.
Step 9：Installation completed.
After finishing installation, please inspect all the screws and nuts carefully to make sure all of them
tightened.
!!The system for monitoring heart rate may not be accurate. Overloading during training can to
cause a serious injury or death. If you feel unwell, stop exercising!!!
NOTICE
1. Inspect all the Nuts, Nut Caps and Pedals in safe situation regularly and inspect the Equipment
periodically. While you find any defective parts, replace them immediately. Don’t exercise until they
are repaired well.
2. Pay more attention to easy damage parts. As the following figure, please inspect the Clamp Brake
Assembly (41) if it falls off or is not work before exercise. If it is, please replace it.
3．Please inspect the Pedal before exercise if it loose or not，please repeat Installation Step 3 if it is.
4．Please adjust the Hexagon Nut by using the Opening Spanner if the Seat (22) is loose.
5．If you need to move the bike, please grasp the Handlebar (5) at their very ends to make the Pulley (21)
of Front Base stand on floor, then the bike could be moved easily.
Loading...