Insinkerator F-GN2200 User Manual
Instant Hot Water Dispensers
The Next
Necessity
F-GN2200
™
Our finest line of instant hot water dispensers
for use with our Hot Water Tank for filtered
near-boiling 200°F water
Tank with filter sold separately (HWT-F1000S)
Submittal Sheet
• Hot Only – Dispenses near-boiling
200°F water
• Graceful classic-design spout swivels for
greater convenience and stylish integrated
lever provides a dramatic look
• Hot lever automatically shuts off
• Durable all brass faucet construction
• 5-Year In-Home
We Come To You
Limited Warranty*
• For use with InSinkErator Hot Water
Tank and F-1000S Filtration System
• Available in these designer finishes:
Satin nickel, polished nickel, chrome,
mocha bronze and oil rubbed bronze
®
Specifications
Valve
Shipping Weight
Required
Hole Diameter
Instant, self-closing
Approximately
5.0 lbs.
1 -1/4" – 1 -1/2"
standard sink hole
Dimensions
5-1/4"
Minimum 3-1/2" requi red
from sink hole center
to backsplash
Hot Side
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
"
Incoming
1/4
Water Supply
10-7/8"
6-3/4"
12 1/2
8"
"
2 1/4"
5-1/2"
NOTE: Max counter thickness is 3".
6-1/8"
Job Specifications
HWD458-13G-45-10
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model F-GN2200 with 2/3-gallon
hot water tank, adjustable temperature from
160°F to 210°F and instant, self-closing hot valve.
Warranty:
5-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
Complies with
California Lead
Plumbing Law
USA
1-800-558-5700
www.insinkerator.com
Canada
1-800-558-5700
www.insinkerator.ca
Printed in USA
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
©2013 InSinkErator, a business unit of
Emerson Electric Co. All Rights Reserved.
Loading...