Project ________________
Item __________________
Quantity _______________
TD-321-3
Automatic Tray Dryer (Optional Component)
Automatic conveyor tray dryer provides 99% dry trays
Unique Air Wiper design reduces ability for bacteria to grow on wet, stacked trays
Drier and cleaner workplace—less racking of trays for drying
Increased productivity
Capacity is compatible with the tray washer and based on a 15" tray
Designed for left or right hand conveyor travel, as specified.
Furnished only as an added component to a TRAC 321-2, TRAC 321-2 RPW
or TRAC 878 traywasher
STANDARD FEATURES
Stainless steel frame, legs and feet
Top mounted NEMA 12 control panel
SureFire® Start-Up & Check-Out Service
CSI - 11400 _____________
Approval _______________
Date ___________________
Insinger’s unique Air Wiper design leaves trays 99% dry saves labor
and provides a cleaner drier workplace.
OPTIONS
Security package
Tray Stacker
TD 321-3
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
TD-321-3
Automatic Tray Dryer (Optional Component)
Capacity Per Hour Compatible with the tray washer and
based on a 15" tray
Motor Size 10 hp (blower)
1/15 hp (conveyor)
Shipping Weight 700 lbs.
Additional Current Draw Amps
when Connected to Tray Washer
208/3/60
240/3/60
380/3/50
480/3/60
Electric Customer Fuse
31.0 FRN-R-60
28.2 FRN-R-60
17.0 FRS-R-35
14.1 FRS-R-30
SPECIFICATIONS
CONSTRUCTION- Hood and tank constructed of 16 gauge 18-8
type 304 S/S. Hood unit of all welded seamless construction. S/S
frame, legs and feet.
CONVEYOR- One stainless steel roller conveyor chain with
tray cradles, through both washer and dryer. Width between
guide rails is factory adjustable from 1.5: to 3.7”. Conveyor
accommodates trays up to 15” high. Conveyor drive system
includes direct drive gear motor with frictionless, trouble-free
overload release system continuously running.
CONTROLS- Top-mounted control cabinet, NEMA 12 rated,
housing motor controls and overload protection, transformer and
contactors. All controls safe low voltage 24 VAC.
BLOWER- 10 hp regenerative blower with Insinger’s specially
designed “air wiper” mounted on either side of conveyor. “Air
wipers” are mounted on a diagonal to sweep water in controlled
movement preventing splashing and uneven results.
DRAIN- All water is drained back into TRAC 321-2, TRAC 321-2
RPW or TRAC 878 with gravity drain connection. Factory installed
drain connection to tray washer provided if dryer is ordered with
a TRAC 321-2, TRAC 321-2 RPW or TRAC 878.
UNLOAD TABLE- A stainless steel tray unload table receives clean
trays. Table constructed with guide rails which ease the trays
onto table.
Note: Due to product improvement we reserve the right to change information and specications without notice.
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
3_2012
TD-321-3
Automatic Tray Dryer (Optional Component)
TD 321-3
This drawing is available on the Insinger Web stie at www.insingermachine.com
Contact Insinger Sales at 800-344-4802 for an Installation Drawing Specific to Your Application
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
TD-321-3
Automatic Tray Dryer (Optional Component)
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
This drawing is available on the Insinger Web stie at www.insingermachine.com
Contact Insinger Sales at 800-344-4802 for an Installation Drawing Specific to Your Application
Loading...