Insinger Machine Co ENSIGN40-2 User Manual

ENSIGN 40-2
Single Tank Counter Type Dishwasher
 Automatic counter type single tank dishwasher with pass-thru
telescoping hood
 0.79 gallons/rack  Capacity is 43- 16" x 16" racks per hour or 720 dishes  No venting required  A timed wash and rinse cycle  Fully automatic operation with power on/off button  Cycle starts when door is closed
Project ________________ Item __________________ Quantity _______________
CSI - 11400 _____________ Approval _______________ Date ___________________
STANDARD FEATURES
 Tank heat: electric immersion heater  Thermometer for wash  Thermometer for final rinse  Vacuum breaker  Manifold clean-out brush  Automatic tank fill  Low water protection  Detergent connection provision  Space saving compact design  Single point electrical connection: motor, controls, heater  Fully automatic operation  Side mounted control panel (NEMA 12)  Simplified scrap screen design  Standard frame drip proof motor  Door safety switch  SureFire® Start-Up and Check-Out Service
OPTIONS
 Stainless steel steam coil tank heat  Pressure reduction valve and line strainer  S/S frame  Steam booster  Remote electric booster  Totally enclosed motor  Plastic 16" x 16" racks (2 plate racks or 2 silver racks)
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
Note: For all rough in connections see installation and layout detail drawing.
ENSIGN 40-2
Single Tank Counter Type Dishwasher
Capacity Per Hour 43 racks
720 dishes
Tank Capacity 8.1 gallons
Motor Size 1/2 hp (wash)
Electric Usage 1.5 kW wash tank
6 kW booster 40° rise 12 kW booster 70° rise
Steam Consumption at 20 psi min.
6 lbs./hour tank 22 lbs./hour remote booster 40° rise
38 lbs./hour remote booster 70° rise
Final Rinse Peak Flow
4.1 gallons/minute
at 20 psi min.
Final Rinse Consumption at 20 psi min.
34 gallons/hour
0.79 gallons/rack
Exhaust Hood Requirement N/A
Peak Rate Drain Flow 9 gallons/minute
Shipping Weight 400 lbs.
Current Draw Amps
115/1/60 240/1/60
208/3/60
240/3/60
380/3/50 480/3/60
Steam
10.7
5.5
2.7
2.4
1.5
1.4
Electric w/o booster
24.0
11.8
6.9
6.0
3.8
3.1
SPECIFICATIONS
CONSTRUCTION- Hood and tank constructed of 16 gauge type 304 S/S. Hood
unit of all welded seamless construction. All internal castings are non-corrosive lead free nickel alloy or bronze.
DOORS- Two opening operating doors. Operating doors have fingertip control,
rotating on S/S bracket. Doors formed of 18 gauge S/S.
PUMP- Centrifugal type “packless” pump with a brass petcock drain. Construc-
tion includes ceramic seal and a balanced cast impeller on a precision ground stainless steel shaft, extension or sleeve. All working parts mounted as an assembly and removable as a unit without disturbing pump housing. One 1/2 hp motor, standard horizontal C-face frame, drip proof, internally cooled with ball-bearing construction.
CONTROLS- Side-mounted control cabinet, housing motor controls and overload
protection, transformer, contactors and all dishwasher integral controls. All controls safe low voltage 24 VAC.
SPRAY SYSTEM- Wash and rinse spray systems made of 18-8 type 304 S/S
pipe.
WASH- Power wash arm above with 14 high pressure action cleaning slots and
6 power wash arms below, each designed with 5 high pressure action cleans­ing slots. The slots are precision milled for water control producing a fan spray. Wash arms are removable without the use of tools.
FINAL RINSE- 1 spray body above designed with 4 power rinse nozzles and 1
power rinse coil below designed with 6 nozzles.
DRAIN- Overflow assembly with skimmer is removable without use of tools for
drain line inspection. Heater protected by low water level controls.
Note: Due to product improvement we reserve the right to change information and specifications without notice.
6245 State Road • Philadelphia, PA 19135 • PH: 800-344-4802 • FX: 215-624-6966 • www.insingermachine.com
1_2010
Loading...