THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE
DEVICE’S OUTER CASING.
PRIVACY RESTRICTIONS
Some countries require full disclosure of recorded telephone conversations,
and stipulate that you must inform the person with whom you are speaking
that the conversation is being recorded. Always obey the relevant laws and
regulations of your country when using the recording feature of your PDA
Phone.
, , , ExtUSB, and HTC Care are trademarks and/or service
marks of High Tech Computer Corp.
Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows
Mobile, Windows XP, Windows Vista, ActiveSync, Windows Mobile Device
Center, Internet Explorer, MSN, Hotmail, Windows Live, Outlook, Excel,
PowerPoint, Word, OneNote and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.
Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc.
miniSD is a trademark of SD Card Association.
Java, J2ME and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other
countries.
All other company, product and service names mentioned herein are
trademarks, registered trademarks or service marks of their respective owners.
HTC shall not be liable for technical or editorial errors or omissions
contained herein, nor for incidental or consequential damages resulting
from furnishing this material. The information is provided “as is” without
warranty of any kind and is subject to change without notice. HTC also
reserves the right to revise the content of this document at any time
without prior notice.
No part of this document may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying, recording
or storing in a retrieval system, or translated into any language in any form
without prior written permission of HTC.
3
4
Disclaimers
THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED
“AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND
FROM HTC. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
HTC AND ITS AFFILIATES expressly disclaim any and all representations
and warranties, express or implied, arising by law or otherwise, regarding
the Weather Information, Data, Documentation, or any other Products
and services, including without limitation any express or implied warranty
of merchantability, express or implied warranty of fitness for a particular
purpose, non-infringement, quality, accuracy, completeness, effectiveness,
reliability, usefulness, that the Weather Information, Data and/or
Documentation will be error-free, or implied warranties arising from course
of dealing or course of performance.
Without limiting the foregoing, it is further understood that HTC and
its Providers are not responsible for Your use or misuse of the Weather
Information, Data and/or Documentation or the results from such use.
HTC and its Providers make no express or implied warranties, guarantees
or affirmations that weather information will occur or has occurred as
the reports, forecasts, data, or information state, represent or depict and
it shall have no responsibility or liability whatsoever to any person or
entity, parties and non-parties alike, for any inconsistency, inaccuracy, or
omission for weather or events predicted or depicted, reported, occurring
or occurred. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING,
YOU ACKNOWLEDGE THAT THE WEATHER INFORMATION, DATA AND/OR
DOCUMENTATION MAY INCLUDE INACCURACIES AND YOU WILL USE
COMMON SENSE AND FOLLOW STANDARD SAFETY PRECAUTIONS IN
CONNECTION WITH THE USE OF THE WEATHER INFORMATION, DATA OR
DOCUMENTATION.
Limitation of Damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY
FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT
LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF
BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS
ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY,
PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR USE OF
THE WEATHER INFORMATION, DATA OR DOCUMENTATION HEREUNDER
REGARDLESS OF THE FORESEEABILITY THEREOF.
Important Health Information and Safety Precautions
When using this product, the safety precautions below must be taken to
avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions. Observe all
warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the
equipment, observe the following precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from the
designated battery or power supply unit. Other usage may be dangerous
and will invalidate any approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION: Connecting to an improperly grounded equipment can result in
an electric shock to your device.
This product equipped with a USB Cable for connecting with desktop or
notebook computer. Be sure your computer is properly grounded (earthed)
before connecting this product to the computer. The power supply cord of
a desktop or notebook computer has an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet
which is properly installed and grounded in accordance with all local codes
and ordinances.
5
6
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
• Use the correct external power source
A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the type
of power source required, consult your authorized service provider or
local power company. For a product that operates from battery power or
other sources, refer to the operating instructions that are included with
the product.
This product should be operated only with the following designated
power supply unit(s).
AC Adapter
1. Delta, Model ADP-5FH X
2. Tamura, Model JHA050100Uabb
3. Phihong, Models PSAA05X-050, PSC05R-050, PSC05R-050 PH and
PSAI05R-050YYY
Car Adapter
1. Phihong, Model CLM10D-050
2. Hwa Ying, Model AP-03
3. L&K Precision Technology Co., Ltd., Model G12PCL-***
• Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire and burns
if the battery pack is handled improperly. Do not attempt to open or
service the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or expose a
battery pack to temperatures higher than 60˚C (140˚F).
WARNING: Danger of explosion if battery is incorrectly replaced. To
reduce risk of fire or burns, do not disassemble, crush, puncture, short
external contacts, expose to temperature above 60° C (140° F), or
dispose of in fire or water. Replace only with specified batteries. Recycle
or dispose of used batteries according to the local regulations or
reference guide supplied with your product.
NOTE: This product should be operated only with the following designated
Battery Pack(s).
1. HTC, Model ATHE160
2. Sanyo, Model ATHE160
• Take extra precautions
• Keep the battery or device dry and away from water or any liquid as it
may cause a short circuit.
• Keep metal objects away so they don’t come in contact with the
battery or its connectors as it may lead to short circuit during
operation.
• Do not use a battery that appears damaged, deformed, or
discolored, or the one that has any rust on its casing, overheats, or
emits a foul odor.
• Always keep the battery out of the reach of babies and small
children, to avoid swallowing of the battery. Consult the doctor
immediately if the battery is swallowed.
• If the battery leaks:
• Do not allow the leaking fluid to come in contact with skin
or clothing. If already in contact, flush the affected area
immediately with clean water and seek medical advice.
• Do not allow the leaking fluid to come in contact with eyes.
If already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.
• Take extra precautions to keep a leaking battery away from fire
as there is a danger of ignition or explosion.
7
8
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures.
Do not leave the product or its battery inside a vehicle or in places where the
temperature may exceed 60°C (140°F), such as on a car dashboard, window sill,
or behind a glass that is exposed to direct sunlight or strong ultraviolet light for
extended periods of time. This may damage the product, overheat the battery,
or pose a risk to the vehicle.
PREVENTION OF HEARING LOSS
CAUTION: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods
of time.
NOTE: For France, Earphones (listed below) for this device have been tested to
comply with the Sound Pressure Level requirement laid down in the applicable
NF EN 50332-1:2000 and/or NF EN 50332-2:2003 standards as required by
French Article L. 5232-1.
• Earphone, manufactured by Cotron, Models CHM-60STV07004 and
CHM-60STV07004T.
SAFETY IN AIRCRAFT
Due to the possible interference caused by this product to an aircraft’s
navigation system and its communications network, using this device’s phone
function on board an airplane is against the law in most countries. If you want
to use this device when on board an aircraft, remember to turn off your phone
by switching to Airplane Mode.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or where
blasting operations are in progress, or in potentially explosive atmospheres
such as fuelling areas, fuel storehouses, below deck on boats, chemical plants,
fuel or chemical transfer or storage facilities, and areas where the air contains
chemicals or particles, such as grain, dust, or metal powders. Please be aware
that sparks in such areas could cause an explosion or fire resulting in bodily
injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where flammable
materials exist, the product should be turned off and the user should obey
all signs and instructions. Sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death. Users are advised not to use the
equipment at refueling points such as service or gas stations, and are reminded
of the need to observe restrictions on the use of radio equipment in fuel
depots, chemical plants, or where blasting operations are in progress. Areas
with a potentially explosive atmosphere are often, but not always, clearly
marked. These include fueling areas, below deck on boats, fuel or chemical
transfer or storage facilities, and areas where the air contains chemicals or
particles, such as grain, dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with
handheld devices, except in the case of emergency. In some countries,
using hands-free devices as an alternative is allowed.
SAFETY PRECAUTIONS FOR RF EXPOSURE
• Avoid using your phone near metal structures (for example, the steel
frame of a building).
• Avoid using your phone near strong electromagnetic sources, such as
microwave ovens, sound speakers, TV and radio.
• Use only original manufacturer-approved accessories, or accessories
that do not contain any metal.
• Use of non-original manufacturer-approved accessories may violate
your local RF exposure guidelines and should be avoided.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this
device is forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer
of your device to determine if they are adequately shielded from external
RF energy. Your physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
9
10
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider,
or call the customer service line to discuss alternatives.
NONIONIZING RADIATION
Your device has an internal antenna. This product should be operated in
its normal-use position to ensure the radiative performance and safety
of the interference. As with other mobile radio transmitting equipment,
users are advised that for satisfactory operation of the equipment and
for the safety of personnel, it is recommended that no part of the human
body be allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized or modified
antennas may impair call quality and damage the phone, causing loss of
performance and SAR levels exceeding the recommended limits as well
as result in non-compliance with local regulatory requirements in your
country.
To assure optimal phone performance and ensure human exposure to RF
energy is within the guidelines set forth in the relevant standards, always use
your device only in its normal-use position. Do not touch or hold the antenna
area unnecessarily when placing or receiving a phone call. Contact with the
antenna area may impair call quality and cause your device to operate at a
higher power level than needed. Avoiding contact with the antenna area when
the phone is IN USE optimizes the antenna performance and the battery life.
Antenna location
General Precautions
• Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service needed
on components inside the device should be done by an authorized
service technician or provider.
• Damage requiring service
Unplug the product from the electrical outlet and refer servicing to
an authorized service technician or provider under the following
conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the
operating instructions.
• Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
• Avoid wet areas
Never use the product in a wet location.
• Avoid using your device after a dramatic change in temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation may
form on or within the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before using the device.
NOTICE: When taking the device from low-temperature conditions into a
warmer environment or from high-temperature conditions into
a cooler environment, allow the device to acclimate to room
temperature before turning on power.
11
12
• Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings
in the product. Slots and openings are provided for ventilation. These
openings must not be blocked or covered.
• Mounting accessories
Do not use the product on an unstable table, cart, stand, tripod,
or bracket. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
• Avoid unstable mounting
Do not place the product with an unstable base.
• Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
• Adjust the volume
Turn down the volume before using headphones or other audio
devices.
• Cleaning
Unplug the product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but
NEVER use water to clean the LCD screen.
• For magnetic devices
Please avoid putting any media that contains magnets,
e.g. magnetic card, credit cards, bank cards, audio/video
tape or magnetic memory devices, directly on the device
or keyboard without any distance.
It is highly recommended to put the media containing
magnets in a security distance of at least 5 cm. If you
carry your wallet or billfold which contains magnetic
cards next to the device or its keyboard, information
stored on these cards could be destroyed.
Please make sure that there is an adequate distance
from the device or its keyboard other magnetic sensitive
devices, e.g., a mechanical watch or measure instruments.
• For pacemakers
The functionality of pacemakers can be interfered by the
device and its keyboard. Always keep the device and its
keyboard in a fair distance to your pacemaker, which at
least will be 5 cm. In any case, please do not carry the
device and/or its keyboard in the front pockets of your
shirt or coat.
For information about other medical active implants,
please contact the producer or a doctor to ensure such
active implants will not be interfered by magnetic field.
13
14
Contents
Chapter 1 Getting Started 19
1.1 Getting to Know Your PDA Phone and Accessories ..................... 20
1.2 Installing the USIM/SIM Card, Storage Card and Battery,
and Charging the PDA Phone .......................................................24
1.3 Starting Up .....................................................................................
1.4 The Start Menu ...............................................................................
1.5 Quick Menu ....................................................................................
1.6 Finger Scrolling and Finger Panning ............................................
1.7 Getting Started Application .........................................................
1.8 Status Icons ....................................................................................
1.1 Getting to Know Your PDA Phone and
Accessories
Front panel
Notification LEDs
* See description below.
Microphone
Touch Screen
Second Camera
Use this camera
for video call
conversations or to
take a self-portrait.
HOME/TODAY
• Press to open your
home page in Internet
Explorer Mobile.
• While in any program
screen, press and hold
for about 3 seconds
to return to the Today
screen.
* Notification LED 1 (GSM): Shows green and amber lights for HSDPA/WCDMA/EDGE/
GSM/GPRS standby, and network status as well as the battery
charging status. Flashes red when the battery level reaches
5% or below. Shows amber light for GPS status.
Notification LED 2 (BT/WIFI): Shows a flashing blue light for Bluetooth system notification
of powered-up and ready to transmit Bluetooth signal, or a
flashing green light for Wi-Fi status. When both Bluetooth
and Wi-Fi are enabled, their lights flash alternately.
Notification LED 3 (ALERT): Shows a flashing amber light when you receive a new
message or for other notifications.
Left panelRight panel
VOLUME CONTROL
During a call or when
playing music, slide up or
down to adjust the volume.
VGA/TV-Out and
USB Host Port
Connect the supplied
multifunction cable on this
port to output the device
screen to an external display
or to connect USB peripherals.
DC IN/SYNC Port
Connect the supplied
USB cable to synchronize
information or plug in the
AC adapter to recharge the
battery.
Earphone/Microphone Jack
Connect the supplied stereo
headset to this port. You can
also connect stereo speakers or
a microphone with a 3.5 mm
plug to this port.
Speakers
Stylus
CAMERA
Press to open the Camera
program. See Chapter 12
for details.
POWER
Press and hold for about 5
seconds to turn the device
on or off. Press to turn off the
display temporarily. For more
information, see “Starting Up”
in this chapter.
Bottom panel
Getting Started 21
Battery Compartment
Houses the battery, SIM card,
and miniSD™ card.
Keyboard Connector
Connects the device to
the hardware keyboard.
22 Getting Started
Back panel
Keyboard
3.0 Megapixel Camera
See Chapter 12 for details.
Flash Light
GPS Antenna
Connector
Peel the rubber cover,
then connect an external
GPS antenna for better
GPS signal reception.
Note Use only the
external GPS
antenna with
model number
GA S110.
RESET
Subdisplay Window
View device information
on this window when
the keyboard covers the
touch screen.
QWERTY Keyboard
See Chapter 2 for details
on how to connect and
use the keyboard.
Accessories
User Ma
n
ual
Read Me First
1
Getting Started 23
32
5
786
9
No. AccessoryFunction
1BatteryPowers the device.
2AC adapterRecharges the battery. Connect the AC adapter to your device,
3USB sync cableConnects your device to a PC and synchronizes data.
4Stereo headsetLets you listen to phone calls or music. The headset provides
5Carrying caseActs as a protective carrying case for your device.
6User manual and
Read Me First
7Multifunction cableConnects your device to an external display to output the
8Extra stylusUse to tap items on-screen.
9Getting Started disc Sources for additional tools and programs.
then plug the AC adapter to an electrical outlet to charge the
battery.
a volume control slider and a Send/End button. Press the
Send/End button to pick up a call or put a call on hold; press
and hold the button to end the call.
Provide instructions for using your device.
screen contents.
24 Getting Started
1.2 Installing the USIM/SIM Card, Storage Card
and Battery, and Charging the PDA Phone
Always turn off your device before installing or replacing the USIM/SIM card,
storage card, and battery. You also need to remove the back cover before you
can install these components.
To remove the back cover
1. Make sure your device is
turned off.
2.
Place the device face down on
a clean and stable surface.
3.
Slide up the battery
compartment cover, then flip
it down to access the battery
bay, USIM/SIM card slot, and
miniSD™ card slot.
NoteTo close the battery compartment cover, flip it up and align it with the battery
compartment, then slide it down until it fits into place.
USIM/SIM card
The 3G USIM (Universal Subscriber Identity Module) or SIM (Subscriber Identity
Module) card contains your phone number, service details, and phonebook/
message memory. Your device supports both 1.8V and 3V USIM/SIM cards.
NoteSome legacy SIM cards may not function with your device. You should consult
with your service provider for a replacement SIM card. There may be fees for this
service.
To install the USIM/SIM card
1. Make sure your device is
turned off.
2.
Locate the USIM/SIM card
slot inside the battery
compartment, then flip up the
USIM/SIM card slot door.
USIM/SIM card slot
Battery bay
miniSD card slot
USIM/SIM card
slot door
Getting Started 25
3. Insert the USIM/SIM card
completely into the slot with
its gold contacts on top and its
cut-off corner facing out the
slot.
4.
Flip down the USIM/SIM card
slot door, then press it until it
clicks in place.
Storage card
A miniSD™ card slot is located inside the battery compartment. To have
additional storage for your images, videos, music, and files, you can purchase a
miniSD card and install it into the your .
To install a miniSD card
Insert the miniSD card into the slot
with its gold contacts facing up.
NoteTo remove the miniSD card,
press it to eject it from the slot.
Battery
Your device comes with a rechargeable Lithium-ion polymer battery and
is designed to use only manufacturer-specified original batteries and
accessories. Battery performance depends on many factors, including network
configuration, signal strength, the temperature of the environment in which
you operate your device, the features and/or settings you select and use, items
attached to connecting ports, and your voice, data, and other program usage
patterns.
NoteBattery life is subject to network and phone usage.
26 Getting Started
2
1
2
1
Battery life estimates (approximations):
• Standby time: Up to 300 hours (GSM/WCDMA)
• Talk time: Up to 300 minutes for WCDMA
• Video call: Up to 120 minutes
• Media playback time: Up to 8 hours for WMV
Warning! To reduce risk of fire or burns:
To install the battery
1. Pull up the battery lock.
2.
Insert the battery with its label side up and its copper connectors first.
360 minutes for GSM
Up to
Up to 12 hours for WMA
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire
or water.
• Do not expose to temperatures above 60oC (140oF).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local
regulations.
1
3. Gently push the battery into
the bay until the battery latch
clicks in place.
4.
Press the battery lock,
then close the battery
compartment cover.
2
Battery lock
Battery latch
To remove the battery
2
1
1. Make sure your device is turned off.
2.
Open the battery compartment.
3.
Lift the battery lock, then
push the battery latch inward
with the stylus tip. The battery
automatically ejects from the
bay.
4.
Pull the battery out of the bay,
then set it aside.
Charge the battery
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you install and charge the battery. Some
batteries perform best after several full charge/discharge cycles.
To charge the battery
• Connect the power adapter
to the device’s DC IN/SYNC
port.
• Connect the device to your
computer using the provided
USB Sync cable.
NoteOnly the AC adapter and USB
sync cable provided with your
device must be used to charge
the device.
Charging is indicated by a solid amber light on the Notification LED 1 (GSM)
indicator. As the battery is being charged while the device’s power is on, a
charging icon appears in the title bar of the Today screen. After the battery
has been fully charged, the Notification LED 1 charging indicator becomes
green and a full battery icon appears in the title bar of the Today screen.
Warning! • Do not remove the battery from the device while you are charging it
using the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
Getting Started 27
3
28 Getting Started
1.3 Starting Up
After installing your SIM card and battery and charging the PDA phone, you
can now power on and start using your device.
Turn your device on and off
To turn on the power
• Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Start Wizard
guides you through the calibration process and the setup of date
and time, and password. For more information about touch screen
calibration, see “Calibrate the device” later in this chapter. After the Quick
Start Wizard finishes, the device installs customization settings, then
restarts.
Note After the device restarts, you may be prompted to set up an e-mail
To turn off the power
• Press and hold the POWER button for a few seconds.
Tap Yes when a message prompts you to choose whether or not to turn
off the device completely.
Calibrate the device
Calibrating the touch screen involves tapping the center of a cross with the
stylus as the cross moves around the screen. This process ensures that when
you tap the screen with your stylus, the tapped item is activated.
If your device does not accurately respond to screen taps, follow these steps
to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen and follow the on-screen
instructions to complete the calibration.
account. Refer to Chapter 7 for details.
Manage screen settings
The device’s display supports two orientation modes: Portrait and
Landscape. Do one of the following to change the screen orientation:
Getting Started 29
• Tap Start > Settings > System tab > Screen > General tab to select
the screen orientation you want.
To smooth the edges of screen fonts for many programs, tap Start >
Settings > System tab > Screen > ClearType tab, then select the Enable
ClearType check box.
To increase the readability or to see more content on the screen, on the Text
Size tab, adjust the text size by moving the slider.
Switch your device to Sleep mode
Press the POWER button shortly to turn off the display temporarily and switch
your device to Sleep mode. Sleep mode suspends your device to a low power
state while the display is off in order to save battery power.
Your device also automatically goes into Sleep mode when you leave the
device idle after a certain period of time.
To specify the timeout period before your device goes into Sleep mode
1. Tap Start > Settings > System tab > Power > Advanced tab.
2.
Under On battery power, make sure the Turn off device if not used
for check box is selected.
3.
Select the battery timeout period, then tap OK.
You will still be able to receive messages and calls while your device is in
Sleep mode. Pressing the POWER button again or incoming calls/messages
will wake up your device.
1.4 The Start Menu
The Start menu, located on the top left corner of the Today screen, displays a
list of programs. You can start a program by scrolling through the programs
list and then pressing the Enter key on the hardware keyboard, or by tapping a
program with your finger or stylus.
30 Getting Started
Open a recently-used program.
Switch to the Today screen.
Access more programs.
View and change settings.
View Help information for
the current screen.
TipThe Start menu items can be customized by tapping Start > Settings >
Personal tab > Menus.
1.5 Quick Menu
The Quick Menu, located at the top right corner of the Today screen, shows
the currently running programs. You can quickly switch between running
programs, stop programs, and see how much program memory is being
used.
Customize the Task Manager
settings. (See “Using Task
Manager” in Chapter 13.)
Stop all
currently
running
programs.
Open a program.
Tap to open the
Quick Menu.
Total percentage of memory
used by running programs.
Tap to open the Memory
settings.
• To switch to a running
program, tap the
program name.
• To stop a running
program, tap .
Loading...
+ 211 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.