Insignia NS-B2111 User Manual

User Guide | Guide de l’utilisateur | Guía del Usuario

Bookshelf speakers I Haut-parleurs d'étagère I Altavoces de estante

NS-B2111

.

Welcome

Congratulations on your purchase of a high-quality Ins ig nia produ ct .
Your NS-B2111 Bookshelf Speakers represents the state of the art in
bookshelf speaker design and is designed for reliable and trouble-free
performance.

Contents

Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Setting up your bookshelf speakers . . . . . . . . . . . . . . . . . . . . .2

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Safety information

• Read all instructions before using your speaker system.

• Turn down the volume on your amplifier if you hear distortion.

• Do not exceed the maximum input power of your speakers.

• Clean the speakers wipe with a dry, soft cloth. Do not use
chemical solvents.

• Do not expose speakers to direct sunlight or excessive
humidity.

• For maximum performance, place speakers on a stable surface
at least 20" (0.5 m) from a TV.

Note: Best Buy is not liable for any accident caused by improper
placement or installation of the speakers.

www.insignia-products.com

1

NS-B2111 Bookshelf Speakers

Setting up your bookshelf speakers

To connect your speakers to your amplifier:

1 Loosen the screw-type knobs on the back of your speaker.
2 Remove 0.5” (10 mm) of insulation from the speaker cable.

3 Insert the bare wire into the open in g at the base of the speaker

knob.

4 Tighten the knob.
5 Connect the + terminal of the speaker to the + terminal of the

amplifier. Repeat for the - terminal.

6 Test the security of the connection by tugging lightly on the cable

at the terminal.

7 Repeat steps 1-6 for the second speaker.

Caution: Do not let the bare speaker wires touch each other, this could

damage the speaker and amplifier.
Note: Make sure that each + terminal of the amplifier is correctly

connected to the + terminal of the appropriate speaker. If this is not
correct, the bass components will not be clear. Correctly connected
speakers will give you a stable, well-defined stereo output with a clear,
powerful bass sound.

2

www.insignia-products.com

NS-B2111 Bookshelf Speakers

Banana plugs

As an alternative to the steps listed above, you can connect an
individual banana plug to the speaker terminal to allow the cables to
connect easily.

Specifications

Type 2-way
Tweeter 4/5” x 1 co-axis tweeter
Woofer 6.5” x 1
Impedance

Max. power 120 W
Sensitivity 90 dB

Ω

8

Frequency response 50-20k Hz
Dimensions

(L x W x H)
Weight 12 lbs. (5.6 kg)

13 x 8 x 12"
(340 x 220 x 310 mm)

www.insignia-products.com

3