Insignia NS-A2110 User Manual
User Guide | Guide de l’utilisateur | Guía del Usuario
Executive Shelf System with CD and AM/FM Tuner
Lecteur de CD de salon haut de gamme avec syntoniseur AM/FM
Sistema de audio tipo ejecutivo con CD y sintonizador de AM/FM
NS-A2110
Insignia NS-A2110
Executive Shelf System
Contents
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Setting up your shelf system. . . . . . . . . . . . . . . . . . . . . . . . . . .8
Using your shelf system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Maintaining your shelf system. . . . . . . . . . . . . . . . . . . . . . . . . 13
Legal notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Welcome
Congratulations on your purchase of a high-quality Ins ig nia produ ct .
Your NS-A2110 represents the state of the art in executive shelf
systems and is designed for reliable and trouble-free performance.
Safety information
To prevent fire or shock hazard, do not plug the power cord into an
extension cord, receptacle, or other outlet unless the blades can be
fully inserted to prevent blade exposure. To prevent fire or shock
hazard, do not expose this appliance to rain or moisture.
CAUTION: To reduce the risk of electric
shock, do not remo ve co v er (or back ). No
user-serviceable parts inside. Refer
servicing to qualified service personnel.
www.insignia-products.com
3
Insignia NS-A2110 Executive Shelf System
The lightning flash with arrowhead symbol within a
triangle is intended to alert you to the presence of
uninsulated dangerous voltage within your shelf
system's enclosure that may be of sufficient magnitude
to constitute risk of electric shock to persons.
The exclamation point within a triangle is intended to
alert you to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying your shelf system.
Warning
Your shelf system uses a laser system. Follow all operating
instructions in this guide, and save this guide for future
reference. If your shelf system requires servicing, contact
the seller or our service center.
To prevent direct exposure to the laser radiation , do not
open the case. Invisible laser radiation is present when the
case is opened or the interlocks are defeated. Do not stare
into the laser beams.
Use of any controls, adjustments, or procedures other than
those specified herein may result in hazardous radiation
exposure.
Caution
Any change or modification to your shelf system not
expressly approved by the manufacturer or its authorized
parties could void your authority to operate your shelf
system.
Caution:
Your shelf system should not be exposed to water (dripping or
splashing) and no objects filled with liquids, such as vases, should be
placed on it.
Important safeguards
• Read instructions—Read all the safety and operating
instructions before operating your shelf system.
• Retain instructions—Retain the safety and operating
instructions for future reference.
• Follow warnings—Follow all warnings on your shelf system
and in the operating instructions.
• Follow instructions—Follow all operating and use
instructions.
4
www.insignia-products.com
Insignia NS-A2110 Executive Shelf System
• Cleaning—Unplug your shelf system from the power outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
• Attachments—Do not use attachments not recommended by
Insignia because they may cause hazards.
• Water and moisture—Do not use your shelf system near
water, f or e xample, near a bath tub, in a wet basement, or near
a swimming pool.
• Ventilation—To ensure reliable operation of your shelf system
and to protect it from overheating, ventilation slots and
openings are provided in the cabinet back or bottom. Do not
block these openings. Do not place your shelf system on a bed,
sofa, rug, or other similar surface. Your shelf system should
never be placed near or over a radiator or heat register. Do not
place your shelf system in a built-in installation such as a
bookcase or rack unless correct ventilation is provided or the
manufacturer’s instructions have been adhered to.
• Power sources—Use only the type of power source indicated
on the marking label. If you are not sure of the type of power
supply to your home, consult your shelf system dealer or local
power company. For shelf systems intended to operate from
battery power or other sources, refer to the operating
instructions.
• Grounding or polarization—Your shelf system is equipped
with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
• Power cord protection—Route power supply cords so that
they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit
from your shelf system.
• Lightning—For added protection for your shelf system during
a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the power outlet and
disconnect the antenna or cable system. This will prevent
damage to your shelf system due to lightning and power line
surges.
• Overloading—Do not overload power outlets and extension
cords because this can result in a r is k of fire or ele ctr i c shock.
www.insignia-products.com
5
Insignia NS-A2110 Executive Shelf System
• Object and liquid entry—Never push objects of any kind into
your shelf system through openings, because they may touch
dangerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on your
shelf system.
• Servicing—Do not attempt to service your shelf system
yourself, because opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
• Damage requiring service—Unplug your shelf system from
the power outlet and refer servicing to qualified service
personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled, or objects have fallen into your
shelf system.
• If your shelf system has been exposed to rain or water.
• If your shelf system does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions, because incorrect
adjustment of other controls may result in damage and
often requires extensive work by a qualified technician to
restore your shelf system to its normal operation.
• If your shelf system has been dropped or damaged in any
way.
• When your shelf system exhibits a distinct change in
performance.
• Replacement parts—When replacement parts are required,
make sure that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the or ig in al part. Unauthori zed substi tuti ons
may result in fire, electric shock, injury to persons, or other
hazards.
• Safety check—Upon completion of any service or repairs to
your shelf system, ask the service technician to perform
routine safety checks to determine that your shelf system is in
correct operating condition.
• Heat—Place your shelf system away from heat sources such
as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Caution
To prevent electric shock, match the wide blade of plug to
the wide slot in the power outlet and fully insert the plug.
6
www.insignia-products.com
Insignia NS-A2110 Executive Shelf System
Features
2
1 6 7 8
345
9
101112
13
14
15
16
17
18
19
# Description Function
1 FM antenna Improves reception of FM radio signals.
2 CD door Open to insert or remove a CD.
3 REPEAT button Press to repeat a track or the entire CD.
4 PLAY/PAUSE
5 PROGRAM button Press to program CD playback.
6STOP
7 TIME SET button Press to set the time of day.
8 SKIP/SEARCH DN button Press to skip to the previous CD tr ack or to search
9 HOUR button Press to set the hour.
10 MINUTE button Press to set the minute.
11 SKIP/SEARCH UP button Press to skip to the next CD trac k or to search the
12 VOLUME control Turn to raise and lower volume.
13 POWER button Press to turn the player on or off.
14 Stereo headphone jack Connect stereo headphones here.
15 FUNCTION switch Slide to select Radio or CD.
button Press to stop CD playback or de lete a program.
button Press to play or pause the CD.
the CD for the track you want.
CD for the track you want.
www.insignia-products.com
7
Insignia NS-A2110 Executive Shelf System
# Description Function
16 TUNING knob Turn to tune to desired radio station.
17 FM stereo indicator Indicates if the radio is receiving FM stereo.
18 BAND selector Choose from AM, FM, or FM ST.
19 Display Displays the clock as well as information about the
CD or radio.
Setting up your shelf system
Connecting the power cord
To use AC power:
1 Make sure that your local AC power source matches the voltage
shown on the plate located inside the battery compartment. If it
does not, consult your dealer or service center.
2 Connect the power cord to the AC power connector on the shelf
system, then plug it into the AC power outlet.
3 To completely turn off the shelf system, unplug the power cord
from the AC power outlet.
Caution
To protect your shelf system, unplug the power cord from
the AC power outlet during heavy thunderstorms.
Connecting the speakers
Connect the speaker wires to the back of the CD/Radio player as
shown in the following illustration.
Press
8
www.insignia-products.com
Right
speaker
Red
Black
Left
speaker
Red
Insignia NS-A2110 Executive Shelf System
Setting the time
To se t th e time:
1 Plug in your shelf system and turn it on by pressing the POWER
button.
2 Press and hold the TIME SET button , then pr ess the HOUR b utton
until the correct hour is shown on the display.
3 Press the MINUTE button until the correct minute is shown on the
display.
4 Turn off the shelf system by pressing the POWER button.
Using your shelf system
Using the radio
To use the radio:
1 Press the POWER button to turn on the shelf system.
2 Slide the function selector to RADIO.
3 Slide the band selector to FM ST. (stereo), AM, or FM.
4 Rotate the TUNING knob to the station you want.
• For FM listening, adjust the antenna for the best signal.
• For AM listening, rotate the player for the best signal (it has a
built-in antenna).
Note
The FM Stereo indicator LED lights when you tune to an FM
stereo station, if the BAND selector is set to FM ST.
5 Adjust the sound level with the VOLUME control.
6 For private listening, plug your stereo headphones into the stereo
headphone jack on top of the player. The speakers mute
automatically.
Warning
To avoid damaging your hearing, set the volume to a low
level before putting on the headphones, then adjust the
volume up to a comfortable level.
7 To turn the radio off, press the POWER button.
www.insignia-products.com
9
Using the CD player
The CD player can play audio discs, including CD-R and CD-RW
discs. The CD player is not compatible with CD-ROM, CDI, VCD,
DVD, or computer CDs.
Note
• CD-R and CD-R W di scs m ust be final iz ed to pl a y in
this CD player.
To use the CD player:
1 Slide the function selector to CD.
2 Open the CD door by lifting the door at the point marked
OPEN/CLOSE.
3 Insert a disc with the printed side up, then close the CD door.
4 Press the PLAY/PAUSE button to start playback.
• To pause playback, press the PLAY/PAUSE button.
• To resume playback, press the PLAY/PAUSE button
again.
5 Adjust the sound level with the VOLUME control.
6 For private listening, plug your stereo headphones into the
headphone jack on top of the player. The speakers mute
automatically.
Insignia NS-A2110 Executive Shelf System
Warning
To avoid damaging your hearing, set the volume to a low
level before putting on the headphones, then adjust the
volume up to a comfortable level.
7 Press the STOP button to stop the CD playback.
Note
Playback also stops when:
• You open the CD door
• You select the RADIO sound source
• The CD is finished
Selecting a different track
To select a different track on a CD:
1 Press the SKIP/SEARCH UP button once for the next track, or
press repeatedly until the track you want appears on the display.
2 Press the SKIP/SEARCH DN button once to return to the
beginning of the current track, or press repeatedly to go to a
previous track until the track you want appears on the display.
3 If you selected a track while the CD is stopped or paused, press
PLAY/PAUSE to begin playback.
10
www.insignia-products.com
Insignia NS-A2110 Executive Shelf System
Locating a specific passage
To locate a specific passage within a track:
1 Press and hold the SKIP/SEARCH UP button or the SKIP/
SEARCH DN button.
2 When you reach the passage you want, release the button.
Normal pla yback resumes.
Repeating portions of a CD
To use Repeat mode:
• Press the REPEAT button once (
display) to repeat the current track.
• Press the REPEAT button again (
display) to repeat the entire CD.
• Press the REPEAT button again to cancel repeat mode and
return to normal playback.
Programming playback
You can program as many as 20 tracks to play in the order you
designate, and repeat any track more than once. An existing program
can be edit ed in the same way.
REPEAT
ALL REPEAT
appears on the
appears on the
To program playback:
1 In Stop mode, press PROG.
2 Press SKIP/SEARCH UP or SKIP/SEARCH DN to select the
track you want.
3 When the track you want appears on the display, press the
PROGRAM button to store the track in memory.
4 Repeat Steps 2 and 3 to select additional tracks.
5 Press PLAY/PAUSE to play your program.
To erase a program:
• Open the CD door
- Or -
• Select the RADIO source with the function selector
To repeat a single track of a program:
1 Press REPEAT while the track is playing.
2 To cancel repeat, press REPEAT twice.
www.insignia-products.com
PROGRAM
appears on the display.
11
Insignia NS-A2110 Executive Shelf System
To repeat an entire program:
1 Press REPEAT twice while the program is playing.
2 To cancel repeat, press REPEAT again.
Troubleshooting
Caution
Do not try to repair the shelf system yourself. Do ing so will
invalidate your warranty.
Problem Possible cause Solution
No sound or
power
The CD does
not play
No disc
indicated on the
display
No sound in the
headphones.
The CD skips
during play.
Volume too low. Turn up the volume.
AC power cord not securely
connected.
The CD was incorrectly
inserted.
The CD is defective. Try another CD.
The CD compartment is not
closed.
There is condensation in the
CD compartment.
No CD inserted. Insert a CD, CD-R, or CD-RW disc.
The CD is badly scratched or
dirty.
There is condensation in the
CD compartment.
You are using a CD-R or
CD-RW that is blank or the
disc has not been finalized.
The headphone jack is not
correctly inserted.
The volume control is turned
down.
The CD is defective. Try another CD.
The CD or lens is dirty. Clean or replace the CD, or clean
Strong shaking or vibrations Place the shelf system on a flat and
The CD play er is progr ammed
to skip a track.
Connect the AC power cord.
Reinsert the CD, label side up.
Close the CD door .
Remove the CD and leave the
cover open for about an hour in a
dry environment.
Clean the CD if it’s dirty. Replace
the CD if it’s defective.
Remove the CD and leave the
cover open for about an hour in a
dry environment.
Use a finalized CD-R or CD-RW.
Reinsert the headphone plug into
the jack.
Increase the volume.
the lens.
stable surf ac e wi tho ut vib ra t io n.
Quit the Pro gram mode.
12
www.insignia-products.com
Insignia NS-A2110 Executive Shelf System
Problem Possible cause Solution
No sound or
poor sound on
the radio.
The station is not tuned in
correctly.
FM—The antenna is not
correctly adjusted.
AM—The player is not
positioned for goo d rece pti on.
Retune the station.
Adjust the FM antenna for better
reception.
Rotate the player for better
reception.
Maintaining your shelf system
Note
The mechanical part of this shelf system contains
self-lubricating bearings and must not be oiled or lubricated.
Cleaning the case
Wipe with a soft cloth. If the case is very dirty, moisten the cloth with a
weak solution of non-caustic detergent and water.
Cleaning the lens
A dirty lens can cause skipping and can even stop the CD player from
working.
To clean dry particles and dust from the lens:
1 Open the CD cover.
2 Use a camera lens puffer/brush to blow repeatedly on the lens,
then wipe with the brush to remove dust.
3 Blow again to remove loose particles. To clean fingerprints from the lens:
• If the lens does not come clean with the puffer/brush, wipe it
with a soft cotton cloth.
www.insignia-products.com
13
Cleaning CDs
Using a soft cleaning cloth, wipe the CD from the center outwards.
Caution
Do not use solvents such as benzene, thinners, commercial
cleaning fluids, or anti-static sprays designed for vinyl
records.
Legal notices
© 2007 Insignia. Insignia and the Insignia logo are trademarks of Best Buy Enterprise
Services, Inc. Other brands and product names are trademarks or registered
trademarks of their respective holders. Specifications and features are subject to
change without notice or obligation.
For service and support call (877) 467-4289.
Insignia NS-A2110 Executive Shelf System
14
www.insignia-products.com
Insignia NS-A2110 Executive Shelf System
Warranty
90-day limited warranty
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new shelf
system (“Product”), that the Product shall be free of defects in the original manufacture
of the material or workmanship for a period of 90 days from the date of your purchase
of the Product (“Warranty P eriod”). This Product must be purchased from an authorized
dealer of Insignia brand products and packaged with this warranty statement. This
warranty does not cover refurbished Product. If you notify Insignia during the Warranty
Period of a defect covered by this warranty that requires service, terms of this warranty
apply.
How long does the coverage last?
The Warranty Peri od lasts for 90 days from the date you purchased the Product. The
purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manuf act ure of the material or workmanship
of the Product is determined to be defective by an authorized Insignia repair center or
store personnel, Insignia will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable
products or parts. Products and parts replaced under this warranty become the
property of Insignia and are not returned to you. If service of Products or parts are
required after the Warranty Period expires, you must pay all labor and parts charges.
This warranty lasts as long as you own your Insignia Product during the Warranty
Period. War ranty coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take y our original receipt and the
Product to the store you purchased it from. Make sure that you place the Product in its
original packaging or packaging that provides the same amount of protect ion as the
original packaging. If you purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that provides the same
amount of protection as the original packaging.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in the United States
and Canada.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
• Accident
•Misuse
•Abuse
• Negligence
• Commercial use
www.insignia-products.com
15
Loading...