Inpax X-9100 User Manual

- 1 -

X-9100

X-9100 Linux

Linux

Linux HD

HD

HD PVR

PVR

PVR Receiver

Receiver

USER

USER MANUAL

MANUAL

Please read this user manual before using or connecting this product

.

And keep it handy for future reference

.

- 2 -

Table

Table of

of

of Contents

Contents

Safetyinstructions ............................................................... ...................... ................ ... ... 3

General Introduction .................................................................................. ................ ... ...4

STB (Receiver) Set up

Front Panel ............................................................................. . . .......................... ... 5

Rear Panel ................................................................................... . . ................ ........ 6

Remote Control Unit ............................................................................. 7

Connecting to TV ................................................................................. 9

Connecting to Dish LNB ........................................................................ 10

Main Menu

1. Installation ................................................................. ..... ........... 11

2. 1.1 Antenna Setting ………………………………………………… ................... … .1 1

1.2 Fast Scan ………………………………………………………… .............. …… .1 4

1.3 USALS Setup ……………………………………………………………… ... … .. . ...1 4

1.4 CA Menu ……… .. ………………………………………………………………… 1 4

2. Channel Manager …………………………………………………………………… .1 5

3. 2. 1 Edit Channel …………………………………… ……………………………… ...1 5

2. 2 Edit Favorite ……………………………………………………………………… .1 5

2. 3 Sort Channel ……………………………………………………………………… 1 6

2. 4 Delete Satellite Channel ………………………………………………………… 1 6

2. 5 Factory Default …………………………………………………………………… 1 6

2. 6 User Channel List ………………………………………………………………… 1 6

3

3 . System Settings ……………………………………………………………………… 1 6

3.1 Setting . ………………………………………………………………………… . … .1 6

3.2 OSD ……………… . ………………………………………………………… . …… 1 7

3. 3 Parental Lock ………………………………………………………………… .. .. … 1 7

3. 4 About STB …………………………………………………………………… . . . . . … 1 7

4.

4. Time Settings …………………………………………………………………… . . …… 1 8

4.1 Time Setup ……………………………………… . ………………………… .. …… 1 8

4.2 Event Timer ………………………………………………… . …………… . ……… 1 8

4.3 Sleep Timer ………………………………………… . …………………… . ……… 1 8

5

5 .

.

. Game ……………… . …………………………………………………………… . . …… 1 9

6

6 .

.

. USB Control …… .... ………………………………………… . ……………… . . ……… 19

6 .1 USB Menu ………………………………………………………………………… 20 6 .2 USB Manager ……………………………………………………………… .. …… 2 2

7. Network Setting … .. ………………………………………… . ……………… . ……… 2 2

8.

7 .1 Wireless Setting.. ………………………………………………………………… 2 2 7 .2 IP Setting …………………………………………………………………… .. …… 2 3 7 . 3 SMB File Setup …………………………………………………………… .. …… 2 3

8

8 .

.

. Network Application ………………………………………………………… . ……… 2 4

8 .1 VFTP ……… . ……………………………………………………………………… 2 4 8 . 2 Youtube …………………………………………………………………………… 2 4 8 . 3 Radio Online ……………………………………………………………………… 2 5 Trouble Shooting …………………………………………………………………… .2 6

Technical Specification ....................................... ................. ......................... ....... .......... 2 7

Glossary ......................................................................................................................... 2 8

- 3 -

Safety

Safety Instructions

Instructions

This STB unit has been designed and manufactured to comply with international safety standards. Please read the following safety Instructions carefully before operating.

4 Power

Power

Power Supply:

Supply:

Before operating this STB unit, please check the correct supply voltage is 90~250V AC 50/60Hz .

4 Overloading:

Overloading:

Do not overload a wall outlet, extension cord or adapter. Never a use damaged power cord or touch it with wet hands as this may result in an electric shock.

4 Liquids:

Liquids:

To prevent damage, the STB shall not be exposed to any liquids.

4 Ventilation:

Ventilation:

Keep the slots on top of the STB uncovered to allow sufficient airflow to the unit. Do not put the receiver on soft furnishings or carpets. Do not expose the STB to direct light or do not place it near a heater or in humid conditions. Do not stack other e lectronic equipment on top of the receiver.

4 Cleaning:

Cleaning:

Always disconnect the STB from the electricity supply before cleaning. Clean the STB with a soft cloth or mild solution of washing-up liquid (no solvents).

4 Connection:

Connection:

In order to protect the LNB, always disconnect the STB from the electricity supply when you either connect or disconnect it to a satellite LNB.

4 Location:

Location:

It is advisable to store the STB indoors in order not to prevent exposure to external elements such as lightening, rain or sunlight. Use the apparatus only in moderate climates (not in tropical climates). Always store the unit in a dry place.

4 WARNING:

WARNING:

Do not remove the cover; to do so may cause a risk of an electrical shock. Always use a fully qualified and licensed engineer to repair the STB, or contact your local dealer.

- 4 -

General

General Introduction

Introduction

INTRODUCTION

This manual will help you learn basic functions such as installation, selecting channels

and many other useful features of the STB. All functions can be operated by the remote

control.

You

can easily install the STB by selecting the “ Installation ” functio n.

Upgrading the software of this unit is possible by inserting any compatible USB device

,

located at the front behind the flap.

The remote control is specifically designed for the user to easily navigate around the

menu. It is pre-programmed to control

all

functions of the STB.

WARNING

The use of unofficial software versions other than dealers or distributors official software

will void the manufacturer

’ s

warranty. It is advised that only the original software

released from authorized dealers or distributors should be used.

UNPACKING

Unpack the unit and check to make sure that

all

of the following items are included in the

packaging.

� 1 x Remote Control Unit (RCU)

� 1 x User Manual

� 2 x AAA batteries

� 1 x Composite Cable (A/V RCA Cable)

� 1 x HD Digital Satellite Receiver (STB) Unit

- 5 -

Front

Front Panel

Panel

Front

Front Panel

Panel

1)

1) Power

Power

Power Button

Button

The POWER button is used to turn the power on or to put it in Standby mode.

2)

2) Menu

Menu

Menu Button

Button

Activate the main menu in viewing mode.

3)

3) OK

OK

OK Button

Button

Activate the highlighted sub menu in menu mode and activate the channel list in viewing mode.

4

4 )

)

) CH+

CH+

/

CH-

CH- Button

Button

Change channel in viewing mode and move the cursor up/down in menu mode.

5

5 )

)

) 4-Digi

4-Digi

4-Digi Display

Display

Display (7-Segment)

(7-Segment)

4-Digi displays channel information. In Standby mode the 7-segment displays local time.

6

6 )

)

) Smart

Smart

Smart Card

Card

Card Slot

Slot

Socket for a TV operator Smart Card.

7

7 )

)

) USB

USB

USB port

port

USB2.0 port for connect to any external USB devices such as USB Disk or HDD.

- 6 -

Real

Real Panel

Panel

Rear

Rear Panel

Panel

1)

1) LNB

LNB

LNB IN

IN

Connect the Satellite Dish LNB.

2)

2) LOOP

LOOP

LOOP OUT

OUT

Output the Dish LNB IN signal.

3)

3) VIDEO,

VIDEO,

VIDEO, AUDIO-L,

AUDIO-L,

AUDIO-L, AUDIO-R

AUDIO-R

Connect to Audio/Video of TV. Connect Yellow to Video port, connect Red and White to Audio Right and Audio Left.

4)

4) S/PDIF

S/PDIF

Digital Audio output via RCA connector.

5)

5) TV

TV

TV SCART,

SCART,

Connect to TV set with Scart Output via Scart cable.

6)

6) RS-232

RS-232

Connection to serial port.

7)

7) HDMI

HDMI

HD signal output.

8)

8) LAN

LAN

RJ45 Output for connect to Ethernet.

9)

9) Power

Power

Power Switch

Switch

To Turn ON or OFF the main power of this STB.

- 7 -

Remote

Remote Control

Control

Control Unit

Unit

Unit (RCU)

(RCU)

1.TV/RADIO:

1.TV/RADIO: Switch between TV and RADIO.

2.

2. POWER:

POWER:

POWER: Switch the receiver on or off.

3.

3. MUTE:

MUTE:

MUTE: Turn the sound On/Off.

4.

4. DISPLAY:

DISPLAY:

DISPLAY: Switch the TV type.

5.

5. MODE:

MODE:

MODE: Switch 4:3 & 16:9 Screen Formats.

6.

6. TIME:

TIME:

TIME: Setup event timer.

7.

7. SLEEP:

SLEEP:

SLEEP: Setting the time for turning the receiver off

8.

8. NUMERIC

NUMERIC

NUMERIC KEY

KEY

KEY (0~9):

(0~9):

(0~9): Change program or input

number.

9:

9: SUB:

SUB:

SUB: Subtitle information.

10.

10. EPG

EPG

EPG (Electronic

(Electronic

(Electronic Program

Program

Program Guide):

Guide):

Guide): TV/Radio

electronic program guide information. *

*

12.

12. FAV:

FAV:

FAV: Press to display favorite channel listing you

set before.

13.

13. TXT:

TXT:

TXT: Press to Display the current channel’s

TELETEXT information. *

*

14.

14. RECALL:

RECALL:

RECALL: Press to show the previous viewed

channel.

15.

15. SAT:

SAT:

SAT: Show the scanned satellite list.

16.

16. MENU:

MENU:

MENU: Press to enter main menu or exit to live

channel.

17.

17. EXIT:

EXIT:

EXIT: Exit current menu step by step.

18.

18. CH

CH

CH ⊳

⊳

/

�

� :

:

: Change TV Channels.

*

* EPG & TELETEXT Information may vary according to your satellite provider.

- 8 -

Remote

Remote Control

Control

Control Unit

Unit

Unit (RCU)

(RCU)

19.

19. VOL

VOL

VOL 

/

 :

:

: Change volume in viewing mode.

20.

20. OK:

OK:

OK: Confirm the highlighted menu item, Open the program list.

21.

21. AUDIO:

AUDIO:

AUDIO: Select or change the Audio.

22.

22. PAUSE:

PAUSE:

PAUSE: Pause and Freeze the picture.

23.

23. Z OOM:

ZOOM:

ZOOM: Zoom in current TV channel

24.

24. INFO:

INFO:

INFO: Show the information of the current channel.

25.

25. VOL

VOL

VOL +/- :

:

: Change volume in viewing mode.

26.

26. FIND:

FIND:

FIND: Quickly find channels

27.

27. :

:

: Activate Multi picture menu and select picture

28.

28. PAGE+/-:

PAGE+/-:

PAGE+/-: Page up/down on menu.

29.

29. F1:

F1:

F1: Function key.

30.

30. USB:

USB:

USB: Access the USB menu. (Note: USB Device must be first connected)

30.

30. ��

��

�� :

:

: Fast forward.

31.

31.  :

:

: Fast backward.

32.

32. �

�

:

Start playing

/

Release pause.

33.

33. ■

■

■ :

:

: Stop recording.

34.

I



:

Play previous item.

35.

35. ��

��

�� I

I

I:Play next item.

36.

I

I I

I

I :

Pause/time shift.

37.

37. ●

●

:

Start recording.

- 9 -

Connecting

Connecting to

to

to TV

TV

Various equipment and TV’s/VCR

’ s

can be connected to this STB. The manual will

explain common ways to connect to the equipment, if you experience any problems,

please contact your sales agency.

1.

How

How to

to

to connect

connect

connect the

the

the STB

STB

STB to

to

to a

a

a TV

TV

TV set

set

• (1) Connect one end of the SCART cable to the TV SCART socket on the back of the STB and the other end to the SCART input socket on your

TV.

• (2) Connect the Antenna cable to TV ANT IN collector of the STB.

- 10 -

Connecting

Connecting to

to

to DISH

DISH

2.

How

How to

to

to connect

connect

connect the

the

the STB

STB

STB to

to

to DISH

DISH

(1) Connect one end of the F cable to the LNB IN socket on the back of the STB and the other end to the LNB installed on your DISH.

(2)

You

can connect one fixed dish LNB directly to the LNB IN, or connect at least two

DISH LNB

’ s

by selecting the DiSEqC Switch, you can also connect to HH mount dish

LNB.

- 11 -

Main

Main Menu

Menu

Plug in the STB power, and turn on the STB, the beginning of the OSD screen will

appear, press MENU button to begin your INSTALLATION

The Main Menu displays various functions of the STB or you can select with

“ UP/DOWN ” buttons and the numeric buttons on the remote control.

To

proceed to the

next stage, press the “ OK ” button on the remote control.

Main

Main Menu

Menu

Press MENU button to activate main menu, this consists of Installation, Channel manager, system settings, Time Settings, Features, & CA System

Use UP/DOWN button to highlight your selection and press OK to confirm. Sub menu options will then follow. By pressing the EXIT button you can return to the previous menu.

1.

1. INSTALLATION

INSTALLATION



 The

The

The default

default

default password

password

password for

for

for this

this

this STB

STB

STB MENU

MENU

MENU is

is

is “

“

“ 0000

0000

0000 ”

”

Select Installation, press OK button to activate Installation menu, the Installation window will be displayed.

1.1

1.1 Antenna

Antenna

Antenna Settings

Settings

Press OK button to enter Antenna Settings; here you can make Satellite Search, Satellite Edit, blind Search and other Functions.

Satellite

Satellite List

List

Press OK button, you can see the Satellite list, in this menu, you can select, add, move, rename, &

delete Satellites .

Select

In this menu, you can press the UP/DOWN keys choose the satellite which you want to use, then press the OK to confirm the settings, thereafter you can set other parameters.

- 12 -

Main

Main Menu

Menu

Add

Select the Add using the LEFT/RIGHT buttons

. Here you can input new Satellite angle, Satellite Direction (east, west), Band (Ku or C). Press OK to confirm the setting, and this new satellite will be added to the end of the Satellite list.

Move

In this menu, you can select the satellite that you want to move from the satellite list using the UP/DOWN keys, then press OK. You will be asked to move the satellite to a specific position number, input the destination number and press OK. Then you can move one satellite from one position to another.

Delete

You can delete the user satellite. Press the OK button select the satellite that you want to delete from the satellite list. You will be asked to confirm whether delete the satellite or not. If you select YES ,

all the channels in the selected satellite an d transponder will be deleted. Press the OK key, and the selected satellite will be erased.

Rename

Rename Satellite

Satellite

You can also change the satellite name. Select the Rename using the LEFT/RIGHT keys. Press OK key and select the character which you want to edit using the character display panel.

Transponder

Transponder List

List

If you change the satellite, the transponder will be changed automatically. You will find the transponder list of the selected satellite here In this menu you can select, Delete, Edit and Add a Transponder. This operation is similar to the one above, you can input the transponder frequency symbol rate, choose polarization H or V (Horizontal,Vertical) and FEC (1/2, 2/3, 3/4, 6/5, 7/8, Auto).

- 13 -

Main

Main Menu

Menu

LNB

LNB frequency

frequency

frequency and

and

and power

power

Here you need to check the LNB frequency according to your antenna, set the correct frequency or define yourself, and keep LNB power to be 13V/18V or 14V/19V.

22KHz

In case you are using two antennas connected to a 22KHz tone switch box. You can supply either 22KHz by setting “ ON ” or “ OFF ” to select antenna.

DiSEqC

DiSEqC type

type

type DiSEqC1.1

DiSEqC1.1

If you connect antenna to DiSEqC Switch, you need to specify the DiSEqC input to which your selected satellite have been configured.

USALS

If you use USALS and select the Motor Mode to USALS, here one more option you can move the dish to exact position of the satellite.



 Before

Before

Before you

you

you use

use

use USALS,

USALS,

USALS, you

you

you should

should

should go

go

go to

to

Main

Main Menu

Menu

Menu →

→

→ Installation

Installation

Installation →

→

→ USALS

USALS

USALS Setup

Setup

Setup to

to

to set

set

you

you local

local

local position

position

position first

first

!

Scan

Scan Mode

Mode

In this menu, you can select all Channels & FTA Channels by setting the search option

Start

Start Search

Search

In this menu, you can select Satellite & Multi-Sat & Transponder or Blind Scan which you want to start search When you press ok you will be asked whether to search by network, you can choose either yes or no.

Satellite

Satellite Search

Search

Selecting one satellite, and press OK to mark. You can select more than one satellite at this time, but make sure they are all configured to your DiSEqC Switch, after selecting, Press OK will start the searching process. During searching the TV Channels and Radio Channels will be listed separately.

- 14 -

Main

Main Menu

Menu

Transponder

Here you need to select one satellite to where your dish is currently pointed, then select the frequency, you need to setup the Polarization of that Selected Transponder, Symbol Rate, FEC .Pressing OK will start searching. During searching process the TV channels and Radio channels will be listed separately.

Blind

Blind Scan

Scan

A smart function which allows the user to search the desired Satellite without having to know the TP data, but you are required to set up correct LNB settings first.

1.2

1.2 Fast

Fast

Fast Scan

Scan

In this menu, when you are in Astra (19.2) satellite, base on the transponder (12515, 22000, H, 5/6), you can fast search channels by different providers.

1.3

1.3 USALS

USALS

USALS Set

Set

Set Up

Up

You can setup the Dish position to the satellite you want to search, you need to check the detailed information from internet and input the accurate parameters about your local position.



 Press

Press

Press the

the

the Red

Red

Red button,

button,

button, you

you

you can

can

can choose

choose

the

the desired

desired

desired country,

country,

country, press

press

press the

the

the OK

OK

OK button

button

button again,

again,

you

you will

will

will then

then

then view

view

view the

the

the listed

listed

listed city

city

city in

in

in this

this

this country

country

that

that you

you

you have

have

have selected.

selected.

1.4

1.4 CA

CA

CA Menu

Menu

CA means Conditional Access, in this menu, it will show the Smart Card information when a Smart Card is inserted into this STB

- 15 -

Main

Main Menu

Menu



 CA

CA

CA Menu

Menu

Menu is

is

is only

only

only valid

valid

valid after

after

after a

a

a Smart

Smart

Smart Card

Card

Card is

is

is inserted

inserted

2.

2. CHANNEL

CHANNEL

CHANNEL MANAGER

MANAGER

2.

2. 1

1

1 Edit

Edit

Edit Channel

Channel

Here you can Select Channel and Delete/Un-delete Channel, Rename Channel, Move Channel, Lock Channel, Select TV Channels, you will get this window. You also can group move the channel.

2.

2. 2

2

2 Edit

Edit

Edit Favorite

Favorite

Here you can set the channel into different favorite category, such as News, Movies, Music, Sports, Education, Weather, Children, Social, Culture. Press different function color button select any sort press OK

OK

OK on viewing mode you can set the channel

type according your mind.

2.

2. 3

3

3 Sort

Sort

Sort Channel

Channel

In this menu you can sort the channels in different order, such as language, FTA, satellite, transponder, favor and Alphabet.

- 16 -

Main

Main Menu

Menu

2.

2. 4

4

4 Delete

Delete

Delete Satellite

Satellite

Satellite Channel

Channel

In this view, you can delete satellite channels. Press OK you will be asked to confirm. Select either “ YES ” or “ NO ”.If you select “ yes ” all data under this satellite will be lost.

2.5

2.5 Factory

Factory

Factory Default

Default

When you choose to set the unit to Factory Default, your STB will be in the original status when you first purchase d this product

.

You can erase all the channels and settings. This can be made by selecting All, then press OK you will be asked to confirm, select either “ YES ” or “ NO ”.If you select “ YES ” all data and current settings will be lost.

2.

2. 6

6

6 User

User

User channel

channel

channel list

list

Nice feature allow user to save the channels and satellite data into the memory of receiver, No need external USB device at all !!!

In this menu, you can save and load the channel list

,

and you can have different channel list as well.

3.

3. SYSTEM

SYSTEM

SYSTEM SETTINGS

SETTINGS

3.

3. 1

1

1 System

System

You can setup the menu language, audio language according to the standard of your country. You also can set the recall list, volume per channel function on or off.

- 17 -

Main

Main Menu

Menu

3.

3. 2

2

2 OSD

OSD

Here you can setup the menu background, transparency and colour, and help information for menu. Time out means the duration of the information bar. You also can setup the HDMI resolution by pressing the Right /Left button, you can change the HD format fro m 1080i to 720p/576I. After you confirm, the TV format can also be changed

3.

3. 3

3

3 Parental

Parental

Parental Control

Control

This function prevents children or unauthorized persons from watching programs. You can set the password for Installation, Edit Channel and System, also you can change the Password, the default password is 0000. When you choose yes, you can change the pas sword option to unlock or lock some menu enter

3.

3. 4

4

4 About

About

About STB

STB

In this window, you can get the information about the STB, such as product name, software & hardware ver sion,and so on.

- 18 -

Main

Main Menu

Menu

4.

4. TIME

TIME

TIME SETTINGS

SETTINGS

4.1

4.1 Time

Time

Time Setup

Setup

The default time setup is auto, you also have the option to select this manually, enter the time zone of your country by pressing the LEFT/RIGHT arrows and you will get the correct current time which is based on TDT (Time and Data Table) in the stream of the current channel service.



 The

The

The time

time

time you

you

you set

set

set will

will

will be

be

be shown

shown

shown on

on

on the

the

the front

front

front panel

panel

panel when

when

when you

you

you set

set

set receiver

receiver

to

to standby

standby

standby mode.

mode.

4.2

4.2 Event

Event

Event Timer

Timer

Here you can set the channels that you like, customized the time to jump to the designated program. You can also customize time to record the designated program, you set including both TV and Radio, you can add, edit and delete the timer event.



 You

You

You can

can

can add

add

add multi-groups

multi-groups

multi-groups in

in

in event

event

timer.

4.3

4.3 Sleep

Sleep

Sleep Timer

Timer

You can set Sleep timer and this function will set receiver to go into Standby mode automatically according to the time you set, user defined time is available as well.

- 19 -

Main

Main Menu

Menu

5.

5. GAMES

GAMES

Here you can find two highly playable internal games for your entertainment purpose

!

Hexa Games and Mine !!

6

6 .

.

. USB

USB

USB CONTROL

CONTROL

Here you can enter the USB menu, and also can set some net parameter and browse web view

6

6 .1

.1

.1 USB

USB

USB Menu

Menu



 This

This

This STB

STB

STB is

is

is designed

designed

designed to

to

to work

work

work with

with

with FAT

FAT

FAT &

&

& FAT32

FAT32

FAT32 &

&

& Ext2,

Ext2,

Ext2, Ext

Ext

Ext 3,

3,

3, and

and

and NTFS

NTFS

format

format USB

USB

USB devices

devices

Plug any compatible USB device into this STB, and enter USB menu, here you can play movies, listen to music, and view your favorite pictures which are installed on your USB device.

Supported V ideo formats: MP4/3GP/MPG/AVI

/ MKV /MOV/TS/ VOB/ DAT/ M2TS/ FLV/ ASF. Supported A udio formats: MP3/PS. Supported P icture formats: JPG/BMP/ PNG/GIF.

RCU

RCU Buttons

Buttons

Buttons for

for

for USB

USB

USB multimedia

multimedia

multimedia function

function

OK

:

View play list

/

Play the selected file in play list



:

Play the selected file in play list

/

Resume playing file

■

:

Stop playing file

- 20 -

Main

Main Menu

Menu

I

I 

:

Play the previous item

 I

I

I:Play the next item



:

Fast backward



:

Fast forward

II

/

PAUSE:

PAUSE: Pause the video or music



/



:

Adjust volume

【 F1 】

:

Jump, you can jump to the specific time of one video.

【 F3 】

:

Adjust the output of Video format, such as 16:9; 4:3

EXIT

:

Exit play list menu

/

Exit playing state and return to file list menu.

Press B

B

B LUE

LUE

LUE button switch LOOP OFF/ON

,

so you can play the files in loop mode

Press G

G

G REEN

REEN

REEN button get HELP message.

Press Y

Y

Y ELLOW

ELLOW

ELLOW button to download the STB database to your USB device.

Press RED

RED

RED button to get the detailed information about the specific file.



 You

You

You can

can

’

t

t play

play

play music

music

music file

file

file under

under

under a

a

a movie

movie

movie folder,

folder,

folder, nor

nor

nor in

in

in picture

picture

picture folder,

folder,

folder, so

so

please

please always

always

always choose

choose

choose correct

correct

correct folder

folder

folder for

for

for your

your

your multimedia

multimedia

multimedia files.

files.



 USB

USB

USB PVR

PVR

Plug the USB device into your STB, simply press RECORD button on the RCU, the Recording of one specific channel is beginning, even you can still change your channels if the recorded channel TP contains other channels.

ATTENTION

ATTENTION FOR

FOR

FOR USB

USB

USB DEVICE

DEVICE

DEVICE and

and

and PVR

PVR

PVR FUNCTION

FUNCTION

Supported Devices:

1) Most of the popular USB 2.0 Hard Drive Disks are supported by our STB, however

if you find one particular HDD that does not work with our STB, please kindly provide us with some information about your hardware, so that we can solve possible incompatibilit y issues.

2) System required: FAT, FAT32, NTFS

3) Minimum Speed required: 5400rpm

- 21 -

Main

Main Menu

Menu

Instructions to TV program

1) Any HD or SD TV program can be recorded by this STB via a external USB device,

the recorded format is TS.

2) During recording, EPG; TXT; Multi AUDIO functions can not be operated.

Recording Capacity

1) Our STB can support up to 4 partitions of one HDD, and theoretically each partition

can allow up to 2TByte (2,000Gb), however, we do suggest to use one HDD with each partition not bigger than 120Gb

WARNING

USB1.1 or USB2.0 Key or Stick (Including MP3 player)

1) We strongly suggest not to record any TV program by USB Key or Stick, because a

huge of different USB Key or Stick are indeed available in the market with different quality level, we do not guarantee any damage of your USB Key or Stick from the attempting recording.

2) Do not remove your USB device from STB while it is in use of any USB multimedia function.



 Time

Time

Time shift

shift

Plug the USB device into your STB, simply press the II

II

II button, the current TV will freeze, and now the

STB enter the Time Shift mode. You will never miss any exciting moment of your favorite TV shows.

You can pause and resume a live television program, and even rewind and replay it. When you are watching a program and you miss something, you can rewind and replay it.. When you do this, you are no longer watching the live program; instead you are watchi ng a delayed presentation of it. This is called time shifted television.

1) Press II

II

II to pause, The video screen will freeze, but the recording will continue.

- 22 -

Main

Main Menu

Menu

2) To go back in time, hold down the tt button; to go forward, hold down the uu button.

3) Press the EXIT

EXIT

EXIT button, you will be asked whether to exit or save the program data,

select yes or no.

6

6 .2

.2

.2 USB

USB

USB Manager

Manager

You can edit the files in the USB device by this menu

Press RED

RED

RED button to list detailed information about

the USB device

Press GREEN

GREEN

GREEN button can rename, delete, create

the files.

Press Y

Y

Y ELLOW

ELLOW

ELLOW button to set the recording path

7

7 .

.

. NETWORK

NETWORK

NETWORK SETTING

SETTING

7

7 .1

.1

.1 Wireless

Wireless

Wireless Setting

Setting

Enter this view, you can set some net parameter and browse web

Wireless

Wireless Settings

Settings

Provided you have a compatible* USB WIFI Dongle ,

you can plug it into the USB port of this STB, and in an area where WIFI is available, you can then connect to the internet.

IP Status In this view, you can check the IP address and the status of the WIFI internet connection.

Search Access Point: This option search to Access Point for WIFI internet, if you found any WIFI site, press “ OK ” button, then enter password and again to verify. If the password is ok, it will

- 23 -

Main

Main Menu

Menu

automatically connect the STB to WIFI internet. Entering the IP SETTING menu will display the status and details of your current connection.



 *This

*This

*This STB

STB

STB supports

supports

supports only

only

only the

the

the USB

USB

USB WIFI

WIFI

WIFI Dongle

Dongle

Dongle with

with

with embedded

embedded

embedded chipset

chipset

model

model ZD1211

ZD1211

ZD1211 series.

series.

7

7 .

.

. 2

2

2 IP

IP

IP Setting

Setting

IP

IP Settings

Settings

In this menu, you can check the internet connection status, The default setting is DHCP ON, and you can set DHCP ON or OFF by pressing the GREEN

GREEN

key.

DHCP: IP-subnet mask and Gateway are not set because the DHCP server automatically assigns these parameters.

Static IP: This option allows the user to manually enter a specific IP-address, IP-subnet mask, DNS and Gateway

To s et DHCP ON, press the BLUE

BLUE

BLUE key, start auto search IP, you will be asked to

confirm, to continue select yes, the receiver will then automatically reboot itself.



 If

If

If you

you

you are

are

are connected

connected

connected to

to

to the

the

the internet,

internet,

internet, the

the

the status

status

status will

will

will show

show

show CONNECTED.

CONNECTED.

7

7 .

.

. 3

3

3 SMB

SMB

SMB File

File

File Setup

Setup

SMB stands for SAMBA, www.samba.org

www.samba.org

,

which is a kind of open source code available to connect LINUX system equipment with Windows, with this function, so you can share your files from Windows PC to this STB, due to this function is quite professional, so it is strongly suggested that you go to www.samba.org

www.samba.org

www.samba.org to check and

learn further information.

Example: Enter this menu, input in the windows share address for example 192.168.0.45/ user,set user name and password, select the SMB Enable, you will be ask ed whether enter the file, choose Yes or No, after select Yes, then press RED button link to the windows share.

After above step, enter the USB menu

,

you can browser over the file of the windows share, if any media file available, you can play it directly.

- 24 -

Main

Main Menu

Menu

8

8 .

.

. NETWORK

NETWORK

NETWORK APPLICATION

APPLICATION

8.1

8.1 VFTP

VFTP

You can created your FTP server on your Windows PC, and through the internet connection, you can view the files on Windows FTP in this menu

So you can play movie or music, pictures of PC directly on the TV via VFTP function

8

8 .

.

. 2

2

2 Youtube

Youtube

This STB has a unique feature which will allow the user to connect with the Youtube website,

www.youtube.com

www.youtube.com In addition, you can browse

millions of HD or SD videos made public on the Youtube website through our STB, the operation method is quite simple with just a few clicks on the Remote Control Unit (RCU).

4 You can only enter into Youtube when internet connection is connected with STB,

- 25 -

Main

Main Menu

Menu

8

8 .

.

. 3

3

3 Radio

Radio

Radio Online

Online

This STB has unique feature which allow user to connect with internet radio station, so you can enjoy the digital quality CD sound right at your home, the operation method is just simple as a few click on RCU.



 You

You

You can

can

can only

only

only enter

enter

enter into

into

into Radio

Radio

Radio Online

Online

when

when internet

internet

internet connection

connection

connection is

is

is connected

connected

connected with

with

with STB

STB

- 26 -

Trouble

Trouble Shooting

Shooting

Trouble

Trouble shooting

shooting

You might meet abnormal working of this STB with various reasons, check the following

which may help you.

Trouble

Possible causes

What to do

LED on the front panel fails

to light up/is not lit.

Mains supply cable is

not connected.

Check if the mains supply cable

is plugged into the power socket.

No picture or sound.

Satellite dish is not pointed

to satellite accurately.

No signal or weak signal.

The LNB is faulty.

The cable is faulty.

Adjust the dish. Check the signal

strength indicator in one of the

channel search submenus.

Check the cable connections, LNB and

other equipment connected to LNB &

receiver, or adjust the dish.

Replace the LNB.

Replace the cable.

Bad picture/blocking

error.

Satellite dish is not pointed to

the satellite accurately

Signal too strong.

Satellite dish is too small.

LNB noise factor too high.

The LNB is faulty.

Adjust the dish.

Connect an attenuator to LNB input.

Change to a larger dish.

Change LNB with lower noise factor.

Replace the LNB.

No startup menu on screen

after turning on STB for the

first time.

The system is connected by

SCART cables and the TV is

not in AV/ EXT mode.

Switch the TV to the appropriate AV

input.

The remote control unit

(RCU) is not working.

Battery exhausted.

Remote control is not

aimed correctly

STB is in standby mode.

Change the batteries (both).

Aim the remote control at the STB.

Check that nothing blocks the front

panel.

Check if LED indicator on the front

panel is showing the time, press the

power button to switch off standby

mode.

You have forgotten your

password.

Contact the dealer or Service Provider.

They will help you set it up again.

Poor picture quality or Less

channels in scanning.

Low LNB power or signal

loss in cable.

Change the LNB power to 14V/19V in

Antenna setup menu.

- 27 -

Technical

Technical Specifications

Specifications

Tuner & Demodulator

MPEG

A/V and Data In/Out Connector

Power Supply

Physical Specification

Demodulation

QPSK, 8PSK

Frequency Range

950 MHz to 2150 MHz

Signal Level

-25 to -65 dBm

RF Impedance

75 Ω Ohms unbalanced

LNB

13V/18V/OFF, max = 400mA

LNB Tone Switch

22KHz+/-2KHz, 0.6Vpp+/-0.2V

DiSEqC Control

Version DiSEq C 1.0/1.1/1.2/1.3(USALS) Compatible, Tone burst

A/B

Symbol Rate

2.0~45 MS/s/s/SCPC,MCPC

FEC Decode &

8PSK

Convolution Code Rate 1/2, 2/3, 3/4, 5/6, 7/8,3/5, 2/3, 3/4, 5/6, 8/9,

9/10, automatic

Transport Stream

MPEG-2 ISO/IEC 13818Transport stream specification

Profile Level

MPEG1,MPEG-2 MP@ML,H.264, VC1, DV, DivX, and MPEG4

Input Rate

80 Mbps for MPEG Transport Stream and 25 Mbps for DV streams

Aspect Ratio

4:3, 16:9

Video Resolution

1920 Į 1080i and 1280 Į 720p for HD video,720 Į 480p, 720 Į 480i,

720 Į 576i, and 720 Į 576p for SD video.

Audio Decoding

MPEG-2 layer I and II (Music cam),MPEG4 AAC and MPEG4 AAC-

HE (AAC+),Dolby Digital (AC-3) with bit rates up to 640 K bits /s,

LPCM up to 48 KHz,MP3.

Audio Mode

Single channel/Dual channel/Joint stereo/Stereo

Sampling

32, 44.1 and 48 KHz

TV SCART

RGB, CVBS, L, R out

3 x RCA

AUDIO L, R. VIDEO out.

RS-232C

RS232C D-sub male type.

LNB IF Input

F type, IEC 169-24 Female

LNB IF Output

F type, IEC 169-24 Female

Input Voltage

AC 100 ~240V, 50/60Hz

Power

Consumption

Max. 25 W

Protection

Separate internal fuse. Input shall have lightening Protection

Weight (Net)

Around 14.61kg

Operating Temp

0 ℃ to + 40 ℃

Storage Temp

-40 ℃ to + 65 ℃

- 28 -

G

G lossary

lossary

4 Antenna

Antenna

A device that collects and radiates electromagnetic waves. Includes a satellite dish and broadband antenna.

4 DiSEqC

DiSEqC

DiSEqC (Digital Satellite Equipment Control)system, it is a communication bus between satellite receivers and peripheral equipment using only the existing coaxial cable.

4 DVB

DVB

The Digital Video Broadcast group was created to establish a technical framework for the introduction of digital video broadcasting systems.

4 LNB

LNB

LNB (low-noise

(low-noise

(low-noise block

block

block converter)

converter)

converter) or

or

or LNB

LNB

An electronic unit mounted on the satellite dish. It receives the signals reflected by the dish and converts them to signals that can be used by the digital satellite receiver.

4 GHz

GHz

The prefix giga means milliard, and Hertz means cycles per second. Signals in the GHz range are often called microwaves.

4 MHz

MHz

The prefix mega means million, and Hertz means cycles per second.

4 MPEG

MPEG

Moving Picture Experts Group. Established by the International Standards Organization to provide the basis for a picture coding and compression system.

4 Forward

Forward

Forward Error

Error

Error Correction

Correction

Correction (FEC)

(FEC)

A system of error control for data transmission.

- 29 -

G

G lossary

lossary

Polarization

Polarization allows several programmers to be fit into the same frequency band. The signals from a satellite are transmitted either with linear (vertical or horizontal) polarizations or circular (right or left) polarization.

4 QPSK

QPSK

QPSK (Quaternary

(Quaternary

(Quaternary Phase

Phase

Phase Shift

Shift

Shift Keying)

Keying)

Phase-shift keying in which four different phase angles are used.

4 Transponder

Transponder

An automatic device that receives, amplifies and retransmits a signal on a different frequency.

4 Symbol

Symbol

Symbol rate

rate

Speed of the digital transmission

4 RGB

RGB

Red, Green, Blue. Color signals are routed in separate cables in order to provide a high quality TV picture.

4 Scrambled

Scrambled

Scrambled TV

TV

TV programmer

programmer

Some TV programmer are transmitted in scrambled form.

4 SERIAL

SERIAL

SERIAL RS

RS

RS 232

232

A serial communication standard data port.

4 SCART

SCART

A 21-pin connector used for connection of the Media master, TV. Also named Euro connector or Partial connector.

S/PDIF

Sony/Philips Digital Interface Format. Digital Audio output

.

Address: Floor-809,West

Tower,

Coastal

City,

Hai De 3 road, Nanshan Area, Shenzhen

City,

Guangdong Province,China

地址：（中国）广东省深圳市南山区海德三道海岸城西座 809 室

Tel:

+86 755 216 79069 Mob: +86 159 893 964 29 Email: inpax@inpax.com.cn Inpax-china@inpax.com.cn

Web:

Web: www.inpax.com.cn

www.inpax.com.cn

Inpax X-9100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual