X-7100 DVB-S Digital Satellite Receiver
USER MANUAL
Please read this user manual before using or connecting this product.
And keep it handy for future reference.
2
Contents
Safet y Ins tructions---- --- --- ---- -------- --- --- -------------------- --- -------3
Precautio ns--------- ---------------- ---- --------- --------------- ---- ---------- --4
Features-------------------------------- -------------------------------------------- 4
Accessories------------------------- ----------------------------------------------5
Front Panel-------------------------------------------- ----------------------------5
Rear Panel--------------------------- ----------------------------- ------------------5
About Remote Control ----------------------------------------- ----------- ----6
Start------------------------ ---------- --------------- ---- -------- -- --- --- -------7-9
Battery Installation----------------------------------------------------------------------------------------------7
Service Life of Batteries---------------------------------------------------------------------------------------7
Operation Range of Remote Control----------------------------------------------------------------------7
Basic connections----------------------------------------------------------------------------------------------8
Preparation------------------------------------------------------------------------------------------------------------------------8
Connecting TV-Set--------------------------------------------------------------------------------------------------------------8
Fast Installation -------------------------------------------------------------------------------------------------9
Advanced Operation-------------------------------------------------------10-15
Main Menu -----------------------------------------------------------------------------------------------------10
Edit Channel --------------------------------------------------------------------------------------------------------------------10
Installation------------------------------------------------------------------------------------------------------------------------11
System Setup---------------------------------------------------------------------------------------------------------------11-13
Tools--------------------------------------------------------------------------------------------------------------------------13-14
Game------------------------------------------------------------------------------------------------------------------------------14
REC---------------------------------------------------------------------------------------------------------------------------14-15
Appendix------------------------------------------------------------------------16-18
Main tenance ---- -- ------- - ----- ------- -- ------- ------- ----- - ------- -- ------ ------ -- ------- -16
Terminology------------------------------------------------------------------------------------------16
Spe ci fi catio ns ------- ------ ------ -- - ----- -- ------- ----- -- -- --- --- -- ------- -- ------ ------ -- -1 7
Tro ubl eshoo tin g ----- ---- ---- ---- --- --- ---- ---- ---- ----- --- ---- ---- - --- ---- --- ---- --- - ---1 8
3
Safety Instructions
Dear customer,
Thank you for purchasing this DVB Satellite Receiver. Please read this manual carefully before
operating your product and pay close attention to the precautions which are mentioned below.
This product only can be operated where the mains supply is ~230V, 50Hz.
To avoid fire and electric shock, do not expose this equipment to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid,
such as vases, shall be placed on the apparatus.
To reduce the chance of fire, electric shock, or annoying interference, use only the recommended
accessories.
The mains plug is used as the disconnect device, the disconnect device shall remain readily
operable。
Keep not less than 5cm distances around the apparatus for sufficient ventilation.
Keep the ventilation should not be impended by covering the openings with items such as
newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
The label was silk-printed on the exterior of the bottom of the apparatus.
Correct Disposal of this product.
To reduce the chance of fire, electric shock, do not open the cover when it works.
This product has been manufactured to conform to the International Safety Standards.
Please peruse the following safety precautions before use.
OVERLOADING
Do not overload a wall outlet, extension cord or adapter as this may result in fire or electric shock.
CLEANING
Disconnect the product from the wall outlet before cleaning. Do not use any aerosol products to
clean the product. Dust the outer surface with a cloth lightly dampened with water (no solvents).
CONNECTING TO ANTENNA
Disconnect the product from mains before connecting or disconnecting to antenna. Otherwise, it
may damage the product and antenna.
CONNECTING TO TV SET
Unplug the power cord when connecting or disconnecting to TV Set. Otherwise, it may damage the
product and antenna
EARTHING
The antenna cable must be earthed to the antenna system and the Earthing System must comply
with the local Electric Safety Standards.
LOCATION
The DVB-T is designed for indoor use only. Do not install the product where it may expose to bright
light or direct sunlight.
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
4
Precautions
Peruse the following precautions before using.
Power Cord Protection
Please complaint the following regulations to
avoid malfunction, fire and electric shock or other
damage to human body.
Make sure to connect and disconnect the
power cord with holding the plug.
Do not connect or disconnect the AC power
with wet hands.
Separate the AC power cord from heating
appliances as distance as possible.
Do not stack any heavy objects on the AC
power cord．
Do not repair or reconstruct the AC power
cord without authorization.
Clean the plug regularly.
Cut off the power and disconnect the AC cord
immediately if the product has been dropped
or damaged.
Cut off the power and disconnect the AC cord
immediately if you find the product is
smoking, burning or noisy.
Location
Do not install the product in following
locations,
Where it may expose to direct sunlight or
heat resources such as heat register and
stove.
Ambient temperature over 35°C or ambient
atmospheric moisture over 90%.
Dusty place.
Where it may influence by magnetic field or
static electricity.
Where it may subject to physical shock,
vibration or dropping.
Non-use Periods
Switch the product to standby status or turn
off the power when the product will not be
used. Unplug the power cord from the AC
outlet when the product will be idle for a long
period of time.
Do not insert fingers or other objects into the
product
It may damage the product or even hurt
human body by touching any internal parts
of the product because of high voltage.
Do not dismantle the product.
Do not stack any object on the product.
Keep water and magnetic things away
Contact with liquid may cause serious
damage, please keep the product away from
it.
Keep product far away from magnetic things,
such as speaker etc.
Position
Place the product on a horizontal surface. Do
not stack heavy things on it.
Do not place the product beneath the
magnifier or other devices that emit heat.
Signal Interference
Under the condition of TV signal receive
situation, TV Set may get signal interference
when you are watching a TV program with
the DVB-T on. This is not means that the
product or the TV Set is malfunction. Please
turn off the DVB-T while watching the TV.
Features
◆ MPEG-2/DVB-S Standard, DVB-S2 HD
Compatible
◆ Support C/Ku Band and Horizontal/Vertical
Polarized Program
◆ Intelligent OSD Menu
◆
Electronic Program Guide（EPG）
◆ Channel Programmable
◆ Display Signals Quality & Strength of Satellite
◆
Go-to-X （Satellite Automatic Positioning）
◆ Supports 22 KHz Tone Switch, DisEqC1.0
and DisEqC1.2 Communication Protocol
◆ Information of Satellite and Transponder
Programmable
◆ Support QPSK Demodulation Mode, SCPC
and MCPC Compatible
◆ Capacity of 3000 programs
◆ Auto scan, Manual Scan and NET Scan
◆ Supports OSD & VBI Teletext Output
◆ Digital Coaxial Output
◆ Power Memory
◆ USB PVR
◆ OTA and USB Upgrade
5
Accessories
After unpacking, Please find out the following accessories:
Remote control one piece
User Manual one piece
Batteries (AAA) two pieces
Front Panels
1.
USB/REC Indicator
2. Power ON/OFF Indicator
3.
IR Receiver Window
Rear Panel
1.
Antenna IN
2.
HDMI Socket
3. Digital Coaxial Output
4.
USB Port
5.
AC IN
NOTE
In order to avoid electric leakage and shock caused by scratched power cord, please unplug the
power cord from the wall outlet and keep it orderly if the product is not going to be used for a long period
time.
6
About Remote Control
Remote control Name Descriptions
1 STANDBY
Switch your device on from
standby mode.
2
Numeric
Buttons
Select channel or programming
parameters. Press numeric
button 0 to switch to sleep mode
.
3 TV/R
Switch between TV and Radio
mode.
4 MENU Enter in setup interface.
5
Navigation
Button-Up
Skip to previous channel.
6
Navigation
Button-Left
Turn down volume.
7
Navigation
Button-Right
Turn up volume.
8 OK
Display channel list on screen.
Confirm selection.
9
Navigation
Button-Down
Skip to next channel.
10 INFO
Display information bar of
current service.
11 AUDIO Shift sound track.
12 TEXT
Display text information of
current channel.
13 F.REW
Switch to USB mode.
Fast backward.
14 F.FWD
Quick view.
Fast forward.
15 PVR Switch to PVR mode.
16 PAUSE/PLAY Make a pause.
17 STOP Stop.
18 REC Switch to REC mode.
19 PREV Back to previous.
20 NEXT Skip to next.
21 EPG
Display Electronic Program Guide
information of current channel.
22 FAV Switch to favorite channels.
23 SUB-T Display subtitle.
24 EXIT Exit from current menu.
25 LAST Back to last channel.
26 MUTE Enable or disable the audio.
7
Start
Battery installation
Install the batteries and make sure the positive (+) and negative (-)
polarities match as shown in Figure A.
Service life of batteries
The batteries normally last for about one year despite that it
depends on how often and in what way the remote control is
operated.
Replace the batteries if the remote control fails to work even
when it is operated near the DVB-T receiver.
Use 2 pieces of 7 (AAA/UM-4) batteries.
Notes
Do not use rechargeable (Ni-Cd) batteries.
Do not attempt to recharge, short circuit, disassemble, heat
the batteries or dispose of in fire.
Do not drop or step on the remote control unit or subject it to
shocks. Otherwise the parts of the remote control unit may get
damaged and lead malfunction.
Do not use the new and old batteries together.
Please remove the batteries if the remote control is not going to be used for a long period of time.
Otherwise, it may cause electrolyte leakage and lead malfunction, even fire accidents. Carefully wipe
the electrolyte out of the remote control compartment and replace with new batteries. If any electrolyte
happens to touch your skin, wash it off thoroughly with clean water immediately.
Operation range of remote control
Point the remote control to the IR receiver window. The remote control shall be effective within a
distance of about 5 meters and an angle of about 60 degrees as shown in Figure B.
The effective range may vary slightly with the brightness of the room.
Notes
Do not shine bright light to the remote control sensor.
The remote control unit may not work if there are obstacles between the remote control and the
sensor.
Do not recommend this remote control using for other products.
8
Start
Basic Connections
Preparation
All equipments must be connected according to this user manual.
Switch off this product and other equipments before connecting
Read the User Manual carefully before connecting other equipments
Plug the Audio and Video cable correctly
When connecting this product with TV set, only one kind of video output format will be accepted.
Please choose a corresponding video output mode for the product, otherwise the image will be
distorted.
NOTE
Users can choose any proper video output formats according to the TV socket and personal
requirements.
Connecting TV-set (Figure C)
1. Antenna (Not included)
2. TV Set (Not included)
3. DVB-S Receiver
4.
HDMI cable for connecting TV set and DVBS Receiver (Not included)
5. AC IN
6.
Digital Coaxial Cable for connecting TV Set
And DVB-S Receiver (Not included)
Connecting Amplifier (Figure D)
9
Start
Fast Installation
Connect this unit and other apparatus according to “BASIC CONNECTIONS”. Plug the power cord,
press [STANDBY] button（no need for first connection）to start.
1.
Press [MENU] button to enter in main menu setup interface.
2.
Use [CH▲/▼] button to select ”Tool” and press [OK] button to enter in its interface.
3.
Use [CH▲/▼] button to select “Factory Setting” and press [OK] button to load factory default. The
default password is “0000”. This step must be done for first time use or after upgrade.
4.
Press [EXIT] button to back to main menu setup interface.
5.
Use [CH▲/▼] button to choose “Installation” and press [OK] button to enter in its setup interface.
The default password is “0000”.
a)
Use [CH▲/▼] button to select “Satellite List” and press [OK] button to enter in its interface.
Select satellite and press [OK] button to confirm selection. Press [EXIT] button to quit.
b) Use [CH▲/▼] button to select “Antenna Setup” and press [OK] button to enter in its interface.
Set up “LNB Freq” and other parameters. Press [EXIT] button to quit.
c)
Use [CH▲/▼] button to select “Single Satellite Search” or “Multi Satellite Search” and press
[OK] button to enter in its interface. Set up parameters and move cursor to “Search” to start
searching.
Read Advanced Operation for more details.
10
Advanced Operation
Menu Operation
Main Menu
Press [MENU] button to browse the Main Menu including 6 submenus which are listed below:
◆ Edit Channel
◆ Installation
◆ System Setup
◆ Tools
◆ Game
◆ Media
Use [▲/▼] button to select item, press [OK] button to enter in its setup interface. Press [EXIT] button
to quit current menu.
Notes
1. The four navigation buttons ([▲/▼/◄/►]), [OK] and [EXIT] button have same functions in all
levels menus.
2. Some buttons have different functions in different menus. Please find out according to the screen.
3. Programmable buttons (which with color) functionality depends on the menu that is active at the
press moment. Please find out according to screen.
1. Edit Channel
Move cursor to “Edit Channel” and press [OK] button to enter in its submenu. There are 4 options
which are listed below.
TV Channel List
Radio Channel List
Delete All
Save as Default
1.1 TV Channel List
Move cursor to “TV Channel List” and press [OK] button to enter in its setup interface.
Use [CH▲/▼] button and press [OK] button to confirm. Use programmable buttons (which with
color) to set up according to screen.
Favor button is activated when the favorite channels have been set. Default Password is: 0000.
FAV: Press [FAV] button to lift the “FAV” icon. Use [CH▲/▼] button to select channel and press [OK]
button to set chosen channel in 8 different favorite groups. Press [OK] button twice to cancel setup.
Press [EXIT] button to quit.
Lock: Press [RED] button to lift the “Lock” icon. Use [CH▲/▼] button to select channel and press
[OK] button to lock, press [OK] button again to cancel lock. Press [EXIT] button to quit current menu
and save according to screen.
Skip: Press [Green] button to lift the “Skip” icon. Use [CH▲/▼] button to select channel and set the
chosen TV program to be skipped when use [CH▲/▼] button to shift channels.
Move: Press [YELLOW] button to lift “Move” icon. Use [CH▲/▼] button to select channel and press
[OK] button to confirm selection. Use [CH▲/▼] button to move and [OK] button to confirm
movement. Press [EXIT] to quit current. Save according to screen.
Edit: Press [BLUE] button to enter in “edit” interface. In “Edit” interface, press [RED] button to sort
channels by Name (A-Z)/Name (Z-A)/Free/Scramble/Lock; press [GREEN] button to edit (rename)
the chosen channel, Press [RED] button to shift alpha between capitalized and small, Press
[GREEN] button to delete input, press [YELLOW] button to confirm, press [BLUE] button to cancel;
press [BLUE] button to delete the chosen channel.
1.2 Radio Channel List
All found radio channels will be listed here.
Refer to the operation of TV Channel List (Item 1.1) for detailed operations.
1.3 Delete All
Delete all TV and radio programs according to screen.
1.4 Save as Default
Please operate according to screen.
11
Advanced Operation
2. Installation
Move cursor to “Installation” and press [OK] button to enter in its submenu. There are 5 options
which are listed below.
Satellite List
Antenna Setup
Signal Satellite Search
Multi Satellite Search
TP List
2.1 Satellite List
Move cursor to “Satellite List” and press [OK] button to enter in its submenu. Use [CH▲/▼] buttons
to choose satellite.
Edit: Press [RED] button to edit satellite. Please operate according to screen. Use [RED] button to
shift alpha between capitalized and small. Use [GREEN] button to delete input. Use [YELLOW]
button to confirm editor. Press [BLUE] button to cancel editor.
Add: Press [GREEN] button add a satellite. Please operate according to chapter “Edit”.
Delete: Use [CH▲/▼] buttons to select satellite and [OK] button to confirm selection. Press [BLUE]
to delete the selected satellite. Press [EXIT] button to quit and save according to screen.
2.2 Antenna Setup
Move cursor to “Antenna Setup” and press [OK] button to enter in its submenu. Use [CH▲/▼]
buttons to select item and [VOL◄/►] buttons to change parameters. Signal Intensity and Signal Quality
will be displayed at bottom of the window.
Satellite: Choose a satellite.
LNB Freq: Press [OK] button to select a proper LNB Frequency.
Transponder: Press [OK] button to select a transponder.
DiSEqC1.0: Press [OK] button to select a digital control port.
22K：Use [VOL◄/►] buttons to activate or deactivate 22K Hz tone switch.
Polarity: Use [VOL◄/►] buttons to choose a polarity voltage: Auto, H(horizontal) and V(vertical).
2.3 Single Satellite Search
Satellite: Press [OK] button to choose satellite.
FTA Only: Yes(Search the free channels only)/No (Search both free and paid channels)
Scan Channel: TV Channel/Radio/TV + Radio
Network Search: Yes/No (It is activated when “Scan Mode” is in “Preset Scan” mode.)
Scan Mode: Auto Scan/Preset Scan
Search: Start search.
2.4 Multi Satellite Search
Satellite: Press [OK] button to choose satellites for search.
FTA Only: Yes(Search the free channels only)/ No (Search all channels)
Scan Channel: TV Channel/Radio/TV + Radio
Network Search: Yes/No (It is activated when “Scan Mode” is in “Preset Scan” mode.)
Scan Mode: Auto Scan/Preset Scan
Search: Start search.
2.5 TP List (Transponder Search)
Move cursor to “TP List” and press [OK] button to enter in its submenu. Press [EXIT] button to quit.
Refer to “Satellite List” for detail operations of Edit/Add/Delete/Search.
3. System Setup
Move cursor to “System Setup” and press [OK] button to enter in its interface. There are 9 options
which are listed below.
Language
TV System
Display Setting
Local Time Setting
Timer Setting
Parental Lock
OSD Setting
Favorite
Other
12
Advanced Operation
3.1 Language
Choose “Language” and press [OK] button to enter in its setup submenu. Use [VOL/] buttons to
change options.
Language: English, French, Deutsch, Italian, Spanish, Russian, Turkish, Polish, Czech, Finnish,
Greek, Swedish and Portuguese.
First Audio: English, French, Deutsch, Italian, Spanish, Russian, Turkish, Polish, Czech, Finnish,
Greek, Swedish and Portuguese.
Second Audio: English, French, Deutsch, Italian, Spanish, Russian, Turkish, Polish, Czech, Finnish,
Greek, Swedish and Portuguese.
Subtitle Language: English, French, Deutsch, Italian, Spanish, Russian, Turkish, Polish, Czech,
Finnish, Greek, Swedish and Portuguese.
Teletext: English, French, Deutsch, Italian, Spanish, Russian, Turkish, Polish, Czech, Finnish, Greek,
Swedish and Portuguese.
3.2 TV System
Video Resolution: By Source/By Native
TV/480i/480p/576i/576P/720_50/720p_60/1081i_50/1080i_60/1080p_50/1080p_60/1080p_25/108
0p_30/1080p_24
Aspect Mode: Auto/4:3 LB/4:3 PS/16:9
Digital Audio Out: LPCM Out/BS Out
3.3 Display Setting
Brightness
Contrast
Saturation
3.4 Local Time Setting
GMT Usage: OFF/ON
GMT Offset: GMT+12:00~GMT-11:30
Summer Time: ON/OFF
Date: Enter in its setup interface, use [VOL◄/►] buttons to move the cursor and numeric buttons to
input. Press [OK] button to confirm imputation.
Time: Enter in its setup interface, use [VOL◄/►] buttons to move the cursor and use numeric
buttons to input. Press [OK] button to confirm imputation.
Notes
1. “GMT Offset” and “Summer Time is only activated when “GMT Usage” in “ON” mode.
2. “Date” and “Time” is only activated when “GMT Usage” in “OFF” mode.
3.5
Timer Setting
There are totally 30 timers.
Timer Mode: OFF/Once/Daily/Weekly/Monthly
Wakeup Channel/Message: Set channel to be waken up.
Wakeup Date: Set up date to wakeup. Use navigation buttons and numeric buttons to set up date.
On Time: Set up time to be wakeup. Use navigation buttons and numeric buttons to set up time.
Duration: Set up an alarm which shows how much time left. Use navigation buttons and numeric
buttons to set up time.
3.6 Parental Lock
Default password is “0000”.
Menu Lock: OFF/ON
Password will be required for all levels of menu if the menu lock is ON.
Channel Lock: OFF/ON
Password will be required for locked channels.
New Password
Confirm Password
Use numeric buttons to set up a password.
3.7 OSD Setting
Subtitle Display: OFF/ON
OSD Time out: 1-10 seconds.
OSD Transparency: OFF/10%/20%/30%/40%.
3.8 Favorite
There are totally 10 groups.
Use [CH▲/▼] buttons to select channel and press [OK] button to rename. Use navigations button to
input according to screen.
Use [RED] button to shift alpha between capitalized and small. Use [GREEN] button to delete input.
Use [YELLOW] button to confirm the edition. Press [BLUE] button to cancel edition.
13
Advanced Operation
3.9 Other
Move cursor to “Other” and press [OK] button to enter in its setup interface.
LNB Power: OFF/ON
Channel Play Type: Free/Scrambled/All
Beeper: OFF/ON
Sleep Timer: OFF/10/30/60/90/120/180 Min
Auto Standby: OFF/10/30/60/120/180 Min
4. Tools
Move cursor to “Tools” and press [OK] button to enter in its submenu. There are 7 options which are
listed below.
Information
Factory Setting
S/W Upgrade by OTA
Upgrade by USB
Save to USB
USB
Remove USB Device Safely
4.1
Information
Move cursor to “Information” and press [OK] button to display information of the device.
4.2
Factory Setting
Move cursor to “Factory Setting” and press [OK] button to load factory default. The default password
is “0000”.This step must be done at first time use or after upgrade. Please operate according to screen.
4.3
S/W Upgrade by OTA
Move cursor to “S/W Upgrade by OTA” and press [OK] button to enter in its submenu.
Satellite: Choose the satellite for upgrade.
Transponder: Select the transponder for upgrade.
Frequency: Select the frequency of upgraded channel.
Symbol Rate: Select the symbol/ code rate of upgrade channel.
Polarity: Select the right polarity of the Upgrade channel.
Download PID: Select the PID of the downloaded upgrade software.
Start: Start upgrading.
NOTE: Please select corresponding item while upgrading.
4.4
Upgrade by USB
Move cursor to “Upgrade by USB” and press [OK] button to enter in its interface.
Here are the steps for upgrade by USB.
Connect USB device with document named “*. abs”.
Enter in “USB Software Update” interface and select “All Code” mode, the update document will be
found in “Upgrade list” automatically.
Choose “START” to load the update document. “Load data” window will display the process. Please
operate according to screen.
Press [EXIT] button to quit.
Notes:
1.
Do not cut off power supply while upgrading.
2.
Factory default must be loaded after upgrade.
4.5
Save to USB
Save Mode: All Code/Radioback/Defaultdb
Save File
Start: Press [OK] button to start saving.
4.6
USB
Plug USB device and enter in “USB” interface. “USB” interface is deactivated without USB device.
Press [USB] button to enter in “USB” interface directly while watching. Press [EXIT] button to quit.
MP3, JPEG and BMP formats are all supported.
Use [CH▲/▼] button to choose file and press [OK] button to enter in its submenu or play.
14
Advanced Operation
TIPS about JPEG Operations
Press numeric button 1 to select all pictures in files which has JPEG documents and add to play list.
Press numeric button 2 to open “Music/Image” play list window, use [VOL◄/►] buttons to select
“Image” or “Music” and press [OK] button to enter in play list.
Press numeric button 3 to set repeat mode.
Press [INFO] button to set up play mode for pictures: Slide Show Time/Slide Show Repeat. Save
according to screen.
Press [REC] button to sort in Default/Name(A-Z)/Name(Z-A)/Image 1st/Music 1st.
Press [FAV] button to add chosen item to play list.
Press [RED] button to play, [YELLOW] button to delete chosen picture, [BLUE] button to select all
and press [OK] button to confirm to delete all, Press [EXIT] but quit.
TIPS about MP3 Operations
Press numeric button 0 to select all MP3 in files which has MP3 documents and add to play list.
Press numeric button 2 to open “Music/Image” play list window, use [VOL◄/►] buttons to select
“Image” or “Music” and press [OK] button to enter in play list.
Press [FAV] button to add chosen item to play list.
Press numeric button 3 to set repeat mode.
Press [INFO] button to set up play mode for pictures: Slide Show Time/Slide Show Repeat. Save
according to screen.
Press [REC] button to sort in Default/Name (A-Z)/Name (Z-A)/Image 1st/Music 1st.
Press [RED] button to play, [YELLOW] button to delete chosen MP3, [BLUE] button to select all and
press [OK] button to confirm to delete all, Press [EXIT] but quit.
Press [PAUSE] button to pause while playing; Press [PLAY] button to play; Press [STOP] button to
stop playing; Press [SKIP+] button to skip to next MP3; Press [SKIP-] button to back to previous
MP3; Press [F.RWD] button to fast backward; Press [F.FWD] button to fast far ward.
Please refer all operation according to screen.
4.7
Remove USB Device Safely
Select “Remove USB Device Safely” and press [OK] button to remove USB device.
5. Game
Move cursor to “Game” and press [OK] button to enter in its submenu. There are 2 options which
are listed below.
Othello
Sudoku
6. Media
Move cursor to “Media” and press [OK] button to enter in its submenu. There are 5 options which
are listed below.
Record Manager
HDD Information
HDD Format
DVR Configuration
Jump
15
Advanced Operation
6.1 Record Manager
Move cursor to “Record Manager” and press [OK] button to enter in its setup interface. The record
time, capacity and format will be displayed in the menu. Find further operation according to screen.
Lock: Press [GREEN] button to lock recorded video. Password will be needed to open locked
recorded video.
Delete: Press [BULE] button to delete recorded video. Please operate according to screen.
Rename: Press [RED] button to rename the recorded video. Please use navigation buttons and
numeric buttons to input. Save according to screen.
Notes
1.
Press [PVR] button to shift to “Record Manager” interface directly.
2.
Use [CH▲/▼] buttons to select recorded video and press [OK] button to play. It will back to “Record
Manager” interface automatically when the video is finished or press [EXIT] button.
TIPS
Press [PLAY] button to have a preview.
Press [OK] button to watch recorded video by full screen.
Press [PAUSE] button to make a pause while playing.
Press [STOP] button to stop playing.
There are 5 options, ×2, ×4, ×8, ×16, ×24 in “Fast Backward” and “Fast Forward” mode.
There are 3 options, ×1/2, ×1/4, ×1/8 in “Slow Forward” mode.
Press [INFO] button twice to open “HDD Record List” and press [OK] button to watch in full screen
while playing,
6.2 HDD Information
Move cursor to “HDD Information” and press [OK] button to view information of plugged USB device.
6.3
DVR Configuration
Move cursor to “DVR Configuration” and press [OK] button to enter in its setup interface.
Time Shift: ON/FF
Time shift to Record : ON/OFF
Record Type: TS(Transport Stream)/PS(Program Stream)
Record Subtitle: ON/OFF
Tips for record real-time channel program.
Connect USB device with receiver.
Turn on “Time Shift” mode.
Press [PAUSE] button to stop the TV program and the receiver will start recording as much as
the USB device capacity is. Press [PLAY] button to continue watch the program from the
stopped.
Use [F.REW] and [F.FWD] buttons to forward or backward of recorded program. There are 5
options, 2、×4、×8、×16 and ×32.
Press [INFO] button twice to enter in “HDD Record List” interface, choose one of it and press
[OK] button to watching by full screen.
The recorded program will be eased automatically once channel has been shifted.
Tips for record video
Connect USB device with receiver.
Press [REC] button to start recording program.
Press [STOP] button to stop recording.
The receiver will start recording as much as the USB device capacity is.
Recorded video will be stored in the disk.
6.4
Jump
Move cursor to “Jump” and press [OK] button to enter in its setup interface. There are 5 options
which are listed below.
30sec
1min
5min
10min
30min
Note: “Jump” function is only activated to non-real-time program. Use [VOL◄/►] buttons to operate.
Tips
While using [VOL◄/►] buttons
The screen will jump to the time as set, requiring [OK] button to confirm the jump.
16
Appendix
Maintenance
◆ Unplug the power cord before maintenance.
◆ Keep the product surface clean. Please use a piece of soft cloth to clean the outer if it’s dirty.
◆ Do not use any chemical products like Alcohol or dilution to clean the product.
◆ Refer all servicing to a qualified service agent.
Terminology
Name
Descriptions
DVB The abbreviation of Digital Video Broadcasting.
DVB-T
OnetypeofDVB
modes
(T=Terrestrial)
.
MPEG The abbreviation of Motion Picture Experts Group.
MPEG-2 The MPEG-2 standards are mainly used in digital TV signals.
Subtitles
The words appear at the bottom of the screen. They are usually recorded on DVD
discs and have 32 languages at most.
FEC
FEC stands for Forward Error Correction, used to correct signal transmission
errors between antennas and the receiver.
PID
The PID code (Packed Identification) is the identification number of audio and
video signals in the digital data flow/stream of DVB MPEG-2 signals. It is used to
transmit audio and video signals to a specific address.
LNB
A low noise block-down converter (or LNB) is the receiving device of a parabolic
satellite dish antenna of the type commonly used for satellite TV reception.
QPSK
Phase-shift keying (PSK) is a digital modulation scheme that conveys data by
changing, or modulating, the phase of a reference signal (the carrier wave). It has
two types: Single channel per carrier(SCPC) and Multi channel per carrier (MCPC)
SCPC
MCPC
DisEqC
DisEqc is a special communication protocol for use between a satellite receiver
and a device such as a multi-dish switch or a small dish antenna rotor.
Go To X
Go To X belongs to Universal Satellites Automatic Location System, which is used
to locate automatically by adjusting longitude and latitude of antenna.
17
Appendix
Specifications
Notes
The data for weight and size are approximations only.
Specifications are subject to change (by manufacturer) without notice.
Item
s
Features
High
Frequency
Tuner
Input Frequency Range 950~2150 MHz (C/Ku Compatible)
Input Signal Level
－65～－30dBm
RF Input Connector IEC169－2, Female
Input Impedance 75Ω
Demodulation
Mode
Demodulation QPSK，Compatible SCPC & MCPC
Symbol Rate 2~45 Mbit/s
Code Rate 1/2, 2/3, 3/4, 5/6, 7/8
Video
Decoding
Video Decoding ISO/IEC13818-2 MPEG2（MP@ML）
Video Resolution 720×576（PAL）；720×480（NTSC）
Video Input Code Rate 15 Mbit/s Max
Teletext DVB-TXTETSI/EN300472
Audio
Decoding
Audio Decoding ISO/IEC13818－3
Audio Track Stereo, Polyphony, Monophony (L, R), SPDIF
Audio Sample Rate 32，44.1, 48KHz
USB
USB
Port
USB2.0
Format MP3/JPGE/BMP
System FAT32, NTFS
Power
Specification
s
Power Range ~ 176-264V，50Hz
Rated Power ~230V, 50Hz
Power
C
onsumption
≤15W
Max
Rated Consumption ≤ 13W
Work
Environment
Temperature 0~40℃
Humidity
<90%
Dimensions
Weight ＜1.5 Kg
Size
130(W)113(D)33(H)mm
18
Appendix
Troubleshooting
Look through the following table about the possible troubles and you may find answers before
request service. It may help you to resolve the problems with some easy operations according to this
table. If something goes wrong with the receiver and can’t back to normal, please cut off the power for
few minutes and restart the product. If the problem remains and proves to beyond your capability, you
had better hand it over to a qualified service agent.
The integrated circuits are easily breakdown by static. Make sure the antistatic protection has been
well taken before maintenance.
Troubles
Possible
Cause
Suggested
Solutions
No power The power cord has not been well connected
Plug the power cord into the outlet tightly
and turn on the power; if still no power,
turn off the power again, and wait for 5-10
minutes, then restart again.
Can not scan
programs
The antenna is not adjusted well
Adjust the antenna or use an outdoor
antenna
Antenna incorrectly
Use an antenna with 75 Ω impedance
input
Parameter
input
incorrectly
Input
Frequency,
Bandwidth
parameter
correctly
No
picture
Output
cordisconnected
incorrectly
Connect
the
output
cord
correctly.
If
the
problem
is
still
exit,
the
output
cord
may
damage.
The
video
output
mode
of
the
unitisdifferent
from
the
mode
of
monitor
Reset
the
mode
No Color
The video output system of the unit is
different from the mode of monitor
Reset the color system
Image distortion
at channel shift
normal
The remote
control fails to
work
Batteries incorrectly installed Install the battery correctly
Batteries exhausted Replace the battery
Beyond the effective operation range Operate within an effective range
The remote sensor is pointed to by bright light. Place the unit elsewhere for a change
Audio track and
subtitle
language are not
the chosen
items
Has not chosen the right sound track Press the Audio button to shift the track
No sound
The unit is in a mute status Cancel the mute
Volume is too low Augment the volume
Cable is connected incorrectly Connect the cable correctly
No
sound
by
chance
There might be a short circuit
Correct the output cable connection, and
turn on again.
In
mute
status
Cancel
the
mute
Stay
asleep
Turn
on
the
unit
Poor
picture
quality
Too
much
interferential
signals
Adjust
the
position
of
antenna.
No response May interfered by static Plug the power cord again
Flash Drive can’t
be read
The USB cable connected incorrectly Connect the cable correctly.
The flash drive’s current is too heavy, the
product wouldn’t afford it.
Provide external power source.
The flash drive runs self-protection program
because of external device short circuit.
Change the short circuit device and
restart the product.
19
Address: Floor-809,West Tower, Coastal City,
Hai De 3 road, Nanshan Area, Shenzhen City, Guangdong Province,China
地址：（中国）广东省深圳市南山区海德三道海岸城西座 809 室
Tel: +86 755 216 79069
Mob: +86 159 893 964 29
Email:inpax@inpax.com.cn
Inpax-china@inpax.com.cn
Web: www.inpax.com.cn
Loading...