This user’s manual describes a product that, due to its nature, cannot describe a particular application. The content of this user’s manual is furnished for informational use only, is subject to change
without notice, and should not be constructed as a commitment by Inova Computers GmbH.
Inova Computers GmbH assumes no responsibility or liability for any errors or inaccuracies that
may appear in this user’s manual.
Except as otherwise agreed, no part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written consent of Inova Computers GmbH.
Products or brand names are trademarks or registered trademarks of their respective companies or
organisations.
Inova Computers GmbHInova Computers Inc,
Innovapark 20270 Communication Way, Bldg. #6
D-87600 KaufbeurenHyannis, MA 02601
GermanyUSA
Inova Computers AG (Schweiz)Inova Computers SARL (France)
Industriestraße 8Aéropolé Bâtiment Aéronef
CH-8618 Oetwil am SeeRue de Copenhague BP 9001
Switzerland95728 Roissy Ch. de Gaulle Cedex
This product has been designed for a long and fault-free life; nonetheless, its life expectancy can
be severely reduced by improper treatment during unpacking and installation.
Observe standard antistatic precautions when changing piggybacks, ROM devices, jumper settings etc. If the product contains batteries for RTC or memory backup, ensure that the board is not
placed on conductive surfaces as these can cause short circuits, damage the batteries or disrupt
the conductive tracks on the board.
Do not exceed the specified operational temperature ranges of the board version ordered. If
batteries are present, their temperature restrictions must be taken into account.
Keep all the original packaging material for future storage or warranty shipments. If it is necessary
to store or ship the board, repack it as it was originally packed.
Before returning this product for repair, please ask for an RMA (Returned Material Authorization)
number and supply the following information:
LCompany name, contact person, shipping address and invoice address
LProduct name and serial number
LFailure or fault description
LClearly write the RMA number on the outside of the transportation carton.
Inova Computers (‘Inova’) grant the original purchaser of Inova products the following hardware
warranty. No other warranties that may be granted or implied by anyone on behalf of Inova are
valid unless the consumer has the expressed written consent of Inova.
Inova warrants their own products (excluding software) to be free from defects in workmanship
and materials for a period of 24 consecutive months from the date of purchase. This warranty is
not transferable nor extendible to cover any other consumers or long term storage of the product.
This warranty does not cover products which have been modified, altered, or repaired by any
other party than Inova or their authorized agents. Furthermore, any product which has been, or
is suspected of being damaged as a result of negligence, misuse, incorrect handling, servicing or
maintenance; or has been damaged as a result of excessive current/voltage or temperature; or has
had its serial number(s), any other markings, or parts thereof altered, defaced, or removed will
also be excluded from this warranty.
A customer who has not excluded his eligibility for this warranty may, in the event of any claim,
return the product at the earliest possible convenience, together with a copy of the original proof
of purchase, a full description of the application it is used on, and a description of the defect; to
the original place of purchase.
Pack the product in such a way as to ensure safe transportation (we recommend the original
packing materials), whereby Inova undertakes to repair or replace any part, assembly or subassembly at our discretion; or, to refund the original cost of purchase, if appropriate.
In the event of repair, refund, or replacement of any part, the ownership of the removed or
replaced parts reverts to Inova, and the remaining part of the original guarantee, or any new
guarantee to cover the repaired or replaced items, will be transferred to cover the new or repaired
items. Any extensions to the original guarantee are considered gestures of goodwill, and will be
defined in the “Repair Report” returned from Inova with the repaired or replaced item.
Other than the repair, replacement, or refund specified above, Inova will not accept any liability
for any further claims which result directly or indirectly from any warranty claim. We specifically
exclude any claim for damage to any system or process in which the product was employed, or
any loss incurred as a result of the product not functioning at any given time. The extent of
Inova’s liability to the customer shall not be greater than the original purchase price of the item
for which any claim exists.
GigaPACK
Inova makes no warranty or representation, either expressed or implied, with respect to its products, reliability, fitness, quality, marketability or ability to fulfil any particular application or purpose. As a result, the products are sold “as is,” and the responsibility to ensure their suitability for
any given task remains the purchaser’s. In no event will Inova be liable for direct, indirect, or
consequential damages resulting from the use of our hardware or software products, or documentation; even if we were advised of the possibility of such claims prior to the purchase of, or
during any period since the purchase of the product. Please remember that no Inova employee,
dealer, or agent are authorized to make any modification or addition to the above terms, either
verbally or in any other form written or electronically transmitted, without consent.
The Inova GigaPACK comprises two completely separate hardware components that are dealt
with in this user’s manual:-
1.) GigaCHAMPION® - the ATI Radeon™ VE-based PCI graphic board with internal USB routing
and GigaST)R transmission technology and
2.) GigaHUB® itself - a small desktop receiver unit with GigaST)R receiver, built-in USB hub for up
to 4 devices and one DVI-D interface for flat-panel monitor connection.
Note:
A variation on the theme is with the
professional solution comprising the
GigaCHAMPION and an embedded
version of the GigaHUB which is
mounted behind an OEM TFT panel.
1.1 Getting Started
1.10 Preparing Your Computer
Turn off the power to your system and discharge your body’s static electric charge by touching a
grounded surface - for example, the metal surface of the power supply - before performing any
hardware procedure.
The manufacturer assumes no liability for any damage, caused directly or indirectly, by improper
installation of any components by unauthorized service personnel. If you do not feel comfortable
performing the installation, consult a qualified computer technician.
Damage to system components, the accelerator card, and injury to yourself may result if power is
applied during installation.
Now that the computer has ben prepared, you are ready to install the PCI GigaCHAMPION graphics accelerator board. Follow these hardware instructions carefully to ensure installation is correct.
1
VIDEO OUTPUT
CONNECTOR
DISPLAY CABLE
Remove the power from your computer and ensure that the power cord is no longer connected.
Disconnect the display connector for the existing graphics board (if installed)
1
POWER SUPPLY
2
GigaPACK
Remove the cover - if necessary, consult your computer’s manual for help. Remember to discharge
your body’s static electricity by touching, for example, the metal chassis of the computer.