INOR MinIPAQ-HLP-USB Data sheet

MIN

IPAQ-HLP

Low Prole

Programmable
2-wire Transmitter
for RTD and T/C

MIN

IPAQ-HLP is a basic, non-isolated, easy-to-use 2-wire transmitter for in-head mounting in DIN B and

similar heads.
Reduced hight simplies mounting in low connection heads.
Conguration is made in seconds with the user friendly Windows software,

power is needed.

MIN

IPAQ-HLP is programmable for RTD’s in 3- and 4-wire connection as well as for 11 T/C types.

Useful error correction functions improve the accuracy.

MIN

IPAQ Soft. No external

Measurements with RTD’s in 3- and 4-wire
connection

MIN

IPAQ-HLP accepts inputs from a number of standardized
RTD’s such as Pt100, Pt500 and Pt1000 acc. to IEC 60751
(α=0.00385), Pt100 acc. to JIS C 1604 (α=0.003916) and US
standards (α=0.003902), Ni100 and Ni1000 acc. to DIN
43760 as well as Ni120 and Cu10 acc. to Edison curves.
3- and 4-wire connection can be selected.

Measurements with Thermocouples

MIN

IPAQ-HLP accepts inputs from 11 types of standardized
Thermocouples.
For T/C input, the CJC (Cold Junction Compensation) is
fully automatic, by means of an accurate measurement of
the terminal temperature. Alternatively, the CJC can
be disabled.

Temperature linear output

Fully temperature linear 4-20 mA output for RTD’s and
Thermocouples.

Designed for harsh conditions

Rugged design tested for 10 g vibrations.

NAMUR compliant

Output limitations and fail currents according to
NAMUR recommendations.

Sensor matching and error corrections for
maximum accuracy

A matching to a calibrated temperature sensor can
easily be performed with the
function.
The

System Error Compensation

the sensor/transmitter combination (or just the transmitter)
for highest accuracy in a certain measuring range.

Sensor Error Compensation

is a convenient way to adjust

Mounting, wiring and testing

MIN

IPAQ-HLP is designed to t inside connection heads type

DIN B or larger.
The large center hole, dia. 7 mm / 0.28 inch, the robust terminals
with test connections and the low hight greatly simplify the
mounting, wiring and testing procedure.

Conguration without external power

Edit or read the conguration off-line by just connecting to the USB

port of a PC.

MIN

IPAQ Soft, easy-to-use Windows conguration

software

The simple and user friendly software,

for transmitter conguration in seconds. In one window all

parameters are set, such as sensor type, measuring range,

lter activation, CJC, sensor failure action, error corrections etc.

MIN

IPAQ Soft, is used

INOR Process AB, PO Box 9125, SE-200 39 Malmö, Sweden, Phone: [phone], Fax: [phone], E-mail: [e-mail]

INOR Transmitter GmbH, Rodenbacher Chaussee 6, DE-63457 Hanau-Wolfgang, Germany, Phone: [phone], Fax: [phone]

INOR Transmitter Inc, 7 Dearborn Road, Peabody, MA 01960, USA, Phone: [phone], Fax: [phone]

INOR Transmitter OY, Unikkotie13, FI-01300 Vantaa, Finland, Phone:[phone], Fax: [phone]

www.inor.com

Specications

18.5/0.72

44.5/1.75

Input RTD

Pt100 (IEC 60751, α = 0.00385) 3-, 4-wire connection -200 to + 1000 °C / -328 to + 1832 °F
Pt 100 (JIS C 1604, α = 0.003916) 3-, 4-wire connection -200 to + 1000 °C / -328 to + 1832 °F
Pt 100 (US, α = 0.003902) 3-, 4-wire connection -200 to + 1000 °C / -328 to + 1832 °F
Pt1000 (IEC 60751, α = 0.00385) 3-, 4-wire connection -200 to + 200 °C / -328 to + 392 °F
Ni100 (DIN 43760) 3-, 4-wire connection -60 to + 250 °C / -76 to + 482 °F
Ni1000 (DIN 43760) 3-, 4-wire connection -100 to + 150 °C / -148 to + 302 °F
PtX (IEC 60751, α = 0.00385) 3-, 4-wire connection Any Pt function between Pt10- Pt1000
Ni120 (Edison No.7) 3-, 4-wire connection -70 to + 300 °C / -94 to + 572 °F
Cu10 (Edison No.15) 3-, 4-wire connection -200 to + 260 °C / -328 to + 500 °F
Sensor current ~ 0.4 mA
Maximum sensor wire resistance 25 Ω/wire

Input Thermocouples

Range Type: B, C, E, J, K, L, N, R, S, T, U Acc. to T/C standards
Maximum sensor wire resistance 500 Ω (total loop)

Monitoring

Sensor failure monitoring Upscale or downscale action

Adjustments

Zero adjustment All inputs Any value within range limits
Minimum spans Pt and Ni input 10 °C / 18 °F
Cu10 100 °C / 180 °F
T/C 2 mV

Output

Analog 4-20 mA, temperature linear
Resolution 5 µA
Minimum output signal Measurement/Failure 3.8 mA / 3.5 mA
Maximum output signal Measurement/Failure 20.5 mA / 21.6 mA
Permissible load, see load diagram 725 Ω @ 24 VDC

Temperature

Ambient, storage and operation -40 to + 85 °C / -40 to + 185 °F

General data

Selectable dampening time ~ 2 s
Update time ~ 1.5 s
Isolation In - Out Non-isolated
Humidity 0 to 100 %RH
Vibration Acc. to IEC 60068-2-6, test Fc, 60-500 Hz, 10 g

Power supply,polarity protected

Supply voltage 8 to 32 VDC
Permissible ripple 4 V p-p @ 50/60 Hz

Accuracy

Linearity RTD ±0.1 %
T/C ±0.2 %
Calibration RTD Max. of ±0.2 °C/ ±0.4 °F or ±0.1 %
T/C Max. of ±20 µV or ±0.1 %
Cold Junction Compensation (CJC) T/C ±0.5 °C / ±0.9 °F

Temperature inuence 3) All inputs Max. of ±0.25 °C/25 °C or ±0.25%/25 °C

Max. of ±0.5 °F/50 °F or ±0.28%/50 °F

Temperature inuence CJC 3) T/C ±0.5 °C/25 °C / ±1.0 °F/50 °F
RFI inuence, 0.15 to 1000 MHz, 10 V or V/m ±0.5%

Long-term stability ±0.2 % 1) /year

Housing

Material, Flammability (UL) PC/ABS + PA, V0
Mounting DIN B-head or larger, DIN rail (with mounting kit)
Connection Single/stranded wires Max. 1.5 mm2, AWG 16
Weight 32 g
Protection, housing / terminals IP 65 / IP 00

1)

Of input span

3)

Reference temperature 20 °C / 68 °F

Input connections

2)

If zero-deection > 100% of input span: add 0.125% of input span/25 °C or 0.14% of input span/50 °F per 100% zero-deection

Output load diagram Dimensions

1)

1)

1)

(typical)

1)

1)

1) 2)

1) 2)

RTD

3-wire connection

RTD

4-wire connection

Output connections

Thermocouple

I

All information subject to change without notice.

R

OUT

LOAD

R

(Ω) =(U-8.0)/0.022

LOAD

PC communication port

mm/inches

Supply voltage U (V DC)

Ordering information

MIN

IPAQ-HLP 70MQHLP002

PC Conguration Kit (USB conn.) 70CFGUS001
Conguration 70CAL00001

Head mounting kit 70ADA00017
Rail mounting kit 70ADA00013

86DMQHLP01 2007-09