ICON
Transmitter
Configuration Kit with
USB Communication
ICON is a complete kit for PC configuration of all transmitters in the INOR
product line, except for the Meso transmitters.
The kit contains the INOR USB Interface, transmitter cables and the new software, ConSoft.
Communication with the connected transmitter is established automatically,
without any problems to match the PC communication port to the software.
• USB communication
• Automatic matching of communication ports
• Automatic transmitter identification for quick start up
• Diagnostic LED’s on the USB Interface show the communication status
• Simple installation of configuration software and drivers for the USB
Interface
• User Instructions and Installation Guide included (on USB memory stick)
• Free download of configuration software, ConSoft, and USB Interface
software from our website
Connection cables
PC to USB
Interface
Part No:
70KAB49817
USB Interface to
IPAQ C201
MinIPAQ-HLP/-L
IPAQ C520/C520X
IPAQ R520/R520X
Part No:
70KAB49717
USB Interface to
IPAQ-Hplus/-Lplus
IPAQ-21L/-22L/
-21LX/-22LX
ProfIPAQ-H/-HX/-L
Part No:
70KAB49718
USB Interface to
IPAQ-L/LX
IPAQ-4L
Part No:
70KAB49719
USB Interface to
IPAQ-H/-HX
Part No:
70KAB49726
Specifications:
Input (PC to USB Interface) USB cable
Output (USB Interface to transmitter) Changeable transmitter cables
Power Supply From USB port
Ambient temperature
Operation 0 to 50 °C / 32 to 122 °F
Storage -20 to 70 °C / -4 to 140 °F
Humidity 0 to 90 % RH
Galvanic isolation 1500 VAC
USB compliance USB v.1.1 and USB v.2.0
System requirements
Windows 2000 (SP3), XP (SP2+), Vista, Windows 7
Display resolution Min. 800 x 600
Hard drive space 50 MB
USB Interface
Part No:
70USBI0001
mm/inch
Ordering information
ICON Complete Configuration Kit 70CFGUS001
Separate parts See above
SPECIALISTS IN INDUSTRIAL TEMPERATURE MEASUREMENT
Loading...