OX
RIDER GUIDE
Check out the
OX SUSPENSION ADAPTERS PATENT
inside!
Congratulations On Your New INOKIM OX!
We are happy you chose to ride INOKIM.
We hope you find it to be a great riding experience,
adding efficiency and fun to your daily commuting.
A note from the designer:
When I started designing my first electric scooter, I envisioned
a world where cars are used for long range distance only, while
lightweight personal electric devices become the primary way of
transportation in urban environments.
After seven years of sales design and development of Quick, LIGHT
& MINI scooters, we found the need for a more powerful
scooter. Our aim was to provide a good solution for heavier riders,
longer range and climbs in both urban & off road surroundings.
We created OX to be an integrated part of your life.
Enjoy, ride carefully and return home safely.
Nimrod Sapir Riccardo
MYWAY NINGBO INTELLIGENT TECHNOLOGY WILL NOT BE HELD
RESPONSIBLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL
DAMAGES CAUSED BY THE USE OR MISUSE OF OUR PRODUCTS.
THE USER AGREES TO ACCEPT FULL RESPONSIBILITY FOR ALL SUCH
RISKS AND TO NOT HOLD MYWAY NINGBO. IT’S DISTRIBUTORS OR
RETAILERS RESPONSIBLE FOR ANY INCIDENT, INJURY TO PERSONS,
OR DAMAGE TO PROPERTY CAUSED BY MISUSE OF THE PRODUCT
DISCLAIMER
WHY READ THIS MANUAL? ............................................................ 2
SAFETY REGULATIONS .................................................................... 3
SPECIFICATIONS ............................................................................. 4
UN-BOX YOUR OX! ......................................................................... 6
BATTERY .......................................................................................... 8
THROTTLE OPERATION ................................................................... 10
DISPLAY MODE SETTINGS ............................................................... 12
THE OX SUSPENSION ADAPTERS PATENT ...................................... 14
CAREFUL RIDING ............................................................................ 16
FOLDING MECHANISM ADJUSTMENT .......................................... 18
SERIAL NUMBER .............................................................................. 19
Table of Contents:
2
WHY READ THIS MANUAL?
Understanding your new INOKIM’s
features, performance, proper use & maintenance,
will help you:
ENJOY
the most from your rst and every ride.
RIDE SMART
For the safety of yourself and your surroundings.
MAINTAIN YOUR INOKIM
For many years of safe and fun riding.
3
SAFETY REGULATIONS
It is prohibited to ride in poor weather conditions:
Never ride in rain, snow, icy road, wet dirt road,
water, poor visibility or other bad weather conditions.
Always wear a helmet. Most serious injuries that
occur while riding are head injuries. This can be
prevented if a helmet is worn. You must wear a
helmet while riding your OX. The helmet must be
worn according to its instructions.
Follow the local laws and regulations. Certain
countries or regions require safety devices or gear.
It is your responsibility to know the state laws, and
follow them.
Firmly lock the folding lever and check your brakes
before every ride.
Do not do stunts, wheelies or jumps. They increase
your chances of injury and might damage your OX.
Do not carry passengers.
Make your rst ride with INOKIM OX
in a remote location, without any obstacles.
WARNING
4
SPECIFICATIONS
MODEL OX ( Hero | Super )
Lithium Battery 60V 13AH (Hero) | 60V 21AH (Super)
Net Weight (+-0.5 kg) 26 kg (Hero) | 28 kg (Super)
Range (Full speed mode)
Rang (Eco mode) 60 km (Hero) | 110 km (Super)
50 km (Hero) | 90 km (Super)
Eco mode is with constant speed of 15 km/H,Full speed mode is with
constant speed of 25 km/H, 75 kg
load, in temperature of 25°C,
on a
Charging Time (H) 8 hours (Hero) | 12.5 hours (Super)
Motor 800W gearless (peak 1300W)
Speed 25 km/H
Brake Front drum brake, rear disk brake
Tire Size
10 x 2.5 inch pneumatic tires optional to
equip 10 x 3 inch off road pneumatic tires
Tire Air Pressure 40 psi to 50 psi
Folded Size L x W x H (cm) 122 x 59 x 54 cm
Open Size L x W x H (cm) 122 x 59 x 130 cm
Load Limit 120 kg
Road lighting Integral car LED lights
Throttle LCD display with functions and illumination
Recommended air pressure in tires: 40 psi to 50 psi.
flat road condition
5
WEIGHT
26-28 kg
57-62 lb
RANGE
60-110 km
37-68 mi
TOP SPEED
25 km/h
15.5 mph
MAX LOAD
120 kg
267 lb
CHARGE TIME
8-12.5 hrs. for
full charge
122 cm | 48 inch 122 cm | 48 inch
130 cm | 51 inch
59 cm | 23 inch
54cm | 21 inch
59 cm | 23inch
LITHIUM ION BATTERY
CASTED ALUMINIUM ALLOY
ANTI SKID TEXTURE
INTEGRAL REAR LIGHT
REAR DISC BRAKE
800W BRUSHLESS
GEARLESS MOTOR
KICKSTAND
REAR SINGLE SIDED SUSPENSION
FOLDING MECHANISM
EVA GRIPS
SPEED CONTROL THROTTLE
FRONT & REAR BRAKS LEVERS
LCD DISPLAY WITH FUNCTIONS AND ILLUMINATION
ORIGINAL
ALLOY WHEEL
10 INCH PNEUMATIC TIRES
FRONT DRUM BRAKE
REAR MUDGUARD
FRONT LED LIGHTS
BELL
FRONT SINGLE SIDED SUSPENSION
6
UN-BOX YOUR OX!
While folded, stand the OX on kickstand.
Push down rear end of OX to release the SNAP LOCK.
Set the handle bar in place.
Use the hex key (4mm)
Are you ready to set your OX free?
Please follow these instructions:
Fasten the RED lever.
4mm
1
2
3
7
UN-BOX YOUR OX!
Adjust the brakes angle
according to your height.
A good indication for your suited
angle is that your wrists are
straight when you ride.
Connect the rear mudgaurd.
Use hex key (5mm)
When folding simply snap
the steering rod into place.
If the SNAP LOCK of your OX
is too loose / tight, you can
ne-tune it by adjusting the
height of the locking hook.
Use hex key (2.5mm)
5
6
4
7
5mm
8
Your OX has a Lithium Battery with an external charger.
When charging, connect the charging cable in this order:
FIRST to INOKIM’s charging socket
THEN to the electrical outlet.
Charging Indication:
RED light - Battery charging...
GREEN light- Charging complete
BATTERY
MAXIMIZE YOUR BATTERY’S PERFORMANCE:
1. For its initial charge, FULLY charge your OX.
This conditions the battery for future life-span.
2. Do NOT leave a fully charged battery connected to a charger,
since overcharging may shorten it’s lifetime.
3. Avoid extreme temperatures. Always try to keep the battery
between 15°c and 25°c (59°F and 77°F). Extreme temperatures
reduce the capacity and lifetime of the battery. A device with a
hot or cold battery may not work temporarily
4. At least once a month fully charge the battery.
5. From time to time discharge the battery by riding.
Use all stored energy in the battery.
6. Before storing it for a long period charge the battery half way.
9
BATTERY SAFETY REGULATIONS:
Keep the battery away from children & pets.
Exposure to the battery voltage can cause death or serious injury.
Unplug the battery from the outlet before performing any maintenance.
It is dangerous to work on an INOKIM Scooter when plugged into an
electrical outlet. Electrical shock can cause serious injury and damage
the scooter.
Do NOT use the scooter if the battery:
• Is damaged
• Emits an unusual odour or excessive heat
• Presents any leakage
Do not operate the scooter while charging!
Charge the battery only using INOKIM’s approved charger.
The use, storage or charging of the INOKIM battery outside specied
limits may result in the annulment of the warranty, battery damage, and
an ineffective battery charging.
DO NOT CUT, OPEN, CRUSH OR PUNCTURE BATTERIES.
IN THE EVENT OF A BATTERY LEAK, PREVENT BATTERY LIQUID
CONTACT WITH SKIN OR EYES. IF THIS HAPPENS, FLUSH THE
AFFECTED AREAS IMMEDIATELY WITH WATER, OR SEEK MEDICAL
HELP.
BATTERY
10
LCD DISPLAY
THROTTLE BUTTONS INTRODUCTION
THROTTLE OPERATION
ON/OFF button
Button
Button
ACCELERATE thumb button
WAITE UNTIL LCD DISPLAY STOPS FLASHING
BEFORE YOU START RIDING.
11
THROTTLE OPERATION
POWER ON
POWER OFF
AUTO OFF
ACCELERATION
LIGHTS FUNCTION
To power the scooter on: press
Waite until LCD display stops
flashing before you start riding.
To shut down the system:
press for three seconds
After 10 minutes of not using any function,
the scooter will automatically shut down.
For accelerating: gently twist the thumb button.
The OX is powerful so be careful!
This function is to limit the full speed of the scooter,
for beginners or for more accurate riding in a
crowded surrounding.
The mode can be changed with the buttons.
Your TRIP distance since your last trip reset.
Reset TRIP by long press
To swap to ODO and battery voltage: press
Your scooters total distance since its factory assembly.
Your current battery voltage status
To turn the front and rear lights on: long press
The LCD back-light indicates that the lights are on.
The lights will turn on automatically if the ambient
photographic coefcient is lower than the set value.
(You can set it in mode 5, p.13)
Your system has encountered an error,
please contact your local dealer to nd out what it is.
12
DISPLAY MODE SETTINGS
Navigate easily through the settings:
Enter settings (mode1): Press together for 2 seconds.
Switch between modes: Press
Return to main function menu: Long press
LCD BACK-LIGHT
Mode 1
SPEED LIMIT MODE
Mode 2
CRUISE CONTROL
Mode 3
There are 3 levels for LCD brightness: low/middle/high.
To change level from 1 to 3: Press .
Long press to save setting.
Short press to enter Mode 2.
Default and highest speed: 25km/h at full throttle.
You can dene other speed limits (from 6km/h to 25km/h).
To change speed limit number: Press or
Long press to save setting.
Short press to enter Mode 3.
While riding at any same speed for more then ten (10)
seconds, the Cruise Control will be turned on.
When Cruise Control is operated, you can release your
thumb from the throttle and the scooter will continue to
ride at full speed.
Default for safety reasons: Cruise Control Off
(“n” indicates no Cruise Control).
To Enable Cruise Control: Press or
(“Y” indicates yes Cruise Control).
Long press to save setting.
Short press to enter Mode 4.
13
DISPLAY MODE SETTINGS
Please be aware that when using Cruise Control,
RELEASING YOUR THUMB FROM THE THROTTLE
WILL NOT SLOW YOU DOWN!!!
You may nd yourself in danger or dangering others.
Your 2 ways to exit Cruise Control:
• Brake with the LEFT or RIGHT brake lever (both work).
• Press the thumb button again.
If you choose to set your Cruise Control to ON. It’s very important you
practice your exit, so that is comes naturally!
KM / MILE
Mode 4
PHOTOCELL
Mode 5
Default Setting: km/h (“0” indicates km).
Press + or - to alternate to mile (“1” indicates mile)
Long press to save setting.
Short press to enter Mode 5.
The throttle has light sensors that detect the photographic
coefcient (light level) and switch your lights on/off accordingly.
Default Setting: Photocell On (“Y” indicates yes)
To disable photocell Press or (“n” indicates no)
To adjust the light level - When letter is “Y” press
Default value: 510.
Press +/- to turn up/down the value.
Long touch to save setting.
WARNING
14
THE OX SUSPENSION ADAPTERS PATENT
LOW POSITION is the default, for better stability mainly at higher speeds.
HIGH POSITION, is for larger suspension travel, mainly in rough terrain
The OX has a unique patent on the adjustable suspension system.
The OX Suspension Adapter Patent : OSAP
The OSAP allows you to alternate the suspension position:
WHEN REPLACING THE OSAP PAY ATTENTION:
Don’t remove the wheel from it’s hinge.
Work on the hinges that are ON the body.
15
In order to turn your OX into HIGH POSITION use the HIGH POSITION kit:
It is recommended that you place the OX on an uplifted surface such as a
chair or a box, so that the main body is rmly set on the surface and the two
wheels are in the air.
Remove the rubber caps and use the 19 mm socket spanner to release the
suspension arms from their location.
Once the suspension arm is out of its place, replace the OSAP from LOW
to HIGH in each suspension arm. Note to keep front and rear OSAP in their
places. Assemble back in a reverse order. You can use the sketch below for
assistance.
REPLACING OSAP FROM LOW TO HIGH
OSAP rear
Suspension arm
19mm washer
Bolt
Rubber cap
16
CAREFUL RIDING
Get to know your OX before driving it. Test your control over it. Make your
turns slowly and cautiously, and give yourself stopping distance.
To gain control over your scooter, practice your rst ride on OX in an open
space with no obstacles to disturb you.
The OX requires a short adjustment and break-in period
for all moving parts to adjust themselves into their correct position
Before each ride always:
1. Check your brakes function.
2. Check the tires for signs of wear -
Spin them to make sure that they are not yet in need of replacing.
Make sure that the wheels are freely rotating from the brakes.
3. Perform a visual inspection :
That all screws and nuts are tight and in place.
Note if anything looks amiss, or is showing signs of wear.
If you are unsure, bring your OX to the authorized distributor.
RIDING TECHNIQUE:
Before riding position your foot as close as possible to the front section of the
scooter, and your other foot on the ground. Make sure that your driving route
is clear.
To start riding, boost yourself forwards (as on non-motorized scooters) with
your foot that is on the ground. Immediately after, place your other foot
on the scooter and press the thumb button downwards, tilting your body
forwards so you won’t fall backwards during acceleration.
17
CAREFUL RIDING
Riding, like most sports, involves risks of injury and
damage. By choosing to ride INOKIM the responsibility
and all inherent risk is on you. It is crucial that you know,
understand and act according to safety rules.
Avoid putting your body pressure on the handle bars in acceleration and
deceleration!
Keep one foot behind the other, (it's more comfortable to place one foot
forward and the other one turned backwards at 70-90°, like on skate/
surfboard). It will help you gain more stability.
Turns - The turns on INOKIM are done as on surf/ski/snowboard. The handlebar should be in parallel to the body. Before turning look at the approaching direction and make sure turning is safe.
Braking - Tilt your weight backwards so that the brake action will come
through the feet and not through the handlebar and steering system.
It is best to learn how to adjust the centre of gravity while
stopping, otherwise there is a dual concern: forward turning over and/or
wear and breaking of the handlebar and steering system.
As you accelerate, lean forwards.
As you brake, tilt your weight backwards!
18
FOLDING MECHANISM ADJUSTMENT
If the folding mechanism is too loose or too tight, you can adjust it.
The Tools you’ll need:
Hex key 4mm
Wrenches 8mm 10mm
To Tighten:
1. Using the hex key turn top screw - counter clockwise by half a turn
(to loosen it).
2. Then use the wrench and turn 10mm bolt - clockwise by half a turn
(to lower it).
3. Now turn 8mm bolt - clockwise and tighten it to bolt 8mm.
4. Test the function and only then, tighten back top screw.
To Loosen:
Follow the same steps, but turn the crews in the opposite direction.
The adjustments needed are VERY small.
Work sensitively, be patient and you’ll get it right!
top screw
8mm bolt
10mm bolt
19
SERIAL NUMBER
20171214016
Each INOKIM has a unique serial number.
These numbers can provide information that may be
useful later on for insurance claims and in case of loss or theft.
The number is on the BOTTOM REAR SIDE of the board
Write down the serial number of your OX scooter.
Keep this information separately and in a safe place!
20
OPERATION & MANAGEMENT
NINGBO MYWAY INTELLIGENT TECHNOLOGY CO.,LTD.
17# PUTUOSHAN ROAD, BEILUN, NINGBO,
ZHEJIANG PROVINCE, CHINA 315806
WWW.INOKIM.COM | GLOBAL@INOKIM.COM
Join / create INOKIM RIDERS in your city!
21
22
WWW.INOKIM.COM
LIKE A STAR
Send us a pic of YOU & YOUR INOKIM
We’ll make it into a SHINING poster.
By the end of the year the one
who has the most likes wins a
S * U * P * R * I * Z * E
Loading...